Microsoft.ServiceBus

This class closes the provided ICommunicationObjects (in parallel) then calls the begin1 and end1 delegates.

An abstract class that supplements the base with additional properties that are common to connection-oriented transports such as TCP and named pipes.

Gets and sets the size of the buffer used to transmit a chunk of the serialized message on the wire from the client or service.

The size of the connection buffer. The default value is 8192 bytes. The value is less than zero.

Gets or sets a value that indicates whether the hostname is used to reach the service when matching on the URI.

Returns a that determines whether the hostname is used to reach the service. The default value is StrongWildCard, which ignores the hostname and port number in the comparison. The value is not a valid HostnameComparisonMode.

Gets or sets the maximum size of the buffer to use.

The maximum number of bytes that are used to buffer incoming messages in memory. The default value is 65,536 bytes. The value is less than or equal to zero.

Gets or sets the maximum number of connections awaiting dispatch on the service.

The maximum number of inbound connections awaiting dispatch on the service. The default value is 10. The value is less than or equal to zero.

Gets or sets the timespan that specifies how long the channel initialization has to complete before timing out.

Returns a after which the initialization times out.

Gets or sets the maximum interval of time that a chunk of a message or a full message can remain buffered in memory before being sent out.

Returns a that specifies the maximum interval of time that a chunk of a message or a full message can remain buffered in memory before being sent out. The default value is 2 seconds. This property is only meaningful if the AllowedOutputBatching property of an outgoing message is set to true. Otherwise, this value is ignored and messages are sent immediately. The value is less than zero.

Gets or sets the maximum number of pending asynchronous accept operations that are available for processing incoming connections to the service.

The maximum number of connections the service can accept simultaneously. The default value is 1. The value is less than or equal to zero.

Gets or sets a value that specifies whether the messages are buffered or streamed with the connection-oriented transport.

Returns a which indicates whether a channel uses streamed or buffered modes of message transfer. The default is Buffered. The value is not a valid TransferMode.

Determines whether a channel factory of the specified type can be built.

The BindingContext for the channel. true if the IChannelListener<TChannel> of type IChannel can be built by the binding element; otherwise, false.

Returns a value that indicates whether the binding element can build a listener for a specific type of channel.

The binding context that provides context for the binding element. true if the IChannelListener<TChannel> of type IChannel can be built by the binding element; otherwise, false.

Retrieves properties from the binding stack, if present.

The binding context that provides context for the binding element. An object from the binding stack, if present, or null if not found.

A Stream that delegates all its methods to an inner Stream.

Abort the ThreadNeutralSemaphore object. NOTE: This method is only supported for sync waiters.

Check untrust store and validation period

Certificate need to validate

validate with retry

The certificate need to validate

If you're using this is there a reason not to just use Task.Delay?

Check if the given buffer ends with "\r\n\r\n" without having to allocate or convert byte[] into string

Check if the given buffer contains the specified ascii character without having to allocate or convert byte[] into string

Check if the given buffer contains the 2 specified ascii characters (in sequence) without having to allocate or convert byte[] into string

A Stream implementation that uses an array from the given InternalBufferManager. When Disposed the array is returned to the buffer manager.

Write into this Stream from another Stream. This method uses our existing array and avoids the allocation that Stream.CopyTo or other Read+Write methods would require.

Extension methods for TaskCompletionSource.

Attempts to transfer the result of a Task to the TaskCompletionSource.

Specifies the type of the result. The TaskCompletionSource. The task whose completion results should be transfered. Whether the transfer could be completed.

Extensions methods for Task.

Creates a task that represents the completion of a second task when a first task completes.

The first task. The function that produces the second task. The task that represents the completion of both the first and second task.

Creates a task that represents the completion of a second task when a first task completes.

The first task. The function that produces the second task based on the result of the first task. The task that represents the completion of both the first and second task.

Creates a task that represents the completion of a second task when a first task completes.

The first task. The function that produces the second task. The task that represents the completion of both the first and second task.

Creates a task that represents the completion of a second task when a first task completes.

The first task. The function that produces the second task based on the result of the first. The task that represents the completion of both the first and second task.

Create a Task based on Begin/End IAsyncResult pattern. This is a wrapper around Task.Factory.FromAsync with the additional guarantee that if the begin delegate throws an Exception it will result in a Task with that exception instead of the exception being thrown from this method.

This parameter helps reduce allocations by passing state to the Funcs. e.g.: await TaskHelpers.FromAsync( (c, s) => ((Transaction)s).BeginCommit(c, s), (a) => ((Transaction)a.AsyncState).EndCommit(a), transaction);

Create a Task based on Begin/End IAsyncResult pattern. This is a wrapper around Task.Factory.FromAsync with the additional guarantee that if the begin delegate throws an Exception it will result in a Task with that exception instead of the exception being thrown from this method.

Create a Task based on Begin/End IAsyncResult pattern. This is a wrapper around Task.Factory.FromAsync with the additional guarantee that if the begin delegate throws an Exception it will result in a Task with that exception instead of the exception being thrown from this method.

Create a Task based on Begin/End IAsyncResult pattern. This is a wrapper around Task.Factory.FromAsync with the additional guarantee that if the begin delegate throws an Exception it will result in a Task with that exception instead of the exception being thrown from this method.

Create a Task based on Begin/End IAsyncResult pattern. This is a wrapper around Task.Factory.FromAsync with the additional guarantee that if the begin delegate throws an Exception it will result in a Task with that exception instead of the exception being thrown from this method.

Create a Task based on Begin/End IAsyncResult pattern. This is a wrapper around Task.Factory.FromAsync with the additional guarantee that if the begin delegate throws an Exception it will result in a Task with that exception instead of the exception being thrown from this method.

Create a Task based on Begin/End IAsyncResult pattern. This is a wrapper around Task.Factory.FromAsync with the additional guarantee that if the begin delegate throws an Exception it will result in a Task with that exception instead of the exception being thrown from this method.

Create a Task based on Begin/End IAsyncResult pattern. This is a wrapper around Task.Factory.FromAsync with the additional guarantee that if the begin delegate throws an Exception it will result in a Task with that exception instead of the exception being thrown from this method.

Create a Task based on Begin/End IAsyncResult pattern. This is a wrapper around Task.Factory.FromAsync with the additional guarantee that if the begin delegate throws an Exception it will result in a Task with that exception instead of the exception being thrown from this method.

Creates a Task that has completed with a specified exception. Once the code has moved to .NET 4.6 just use Task.FromException;

Creates a Task<TResult> that's completed with a specified exception. Once the code has moved to .NET 4.6 just use Task.FromException<TResult>

Returns a Task<TResult> that's completed successfully with the specified result. It's comparable to Task.FromResult() but doesn't allocate if T is null.

Rethrow the Exception while preserving the previous throw location. The following string is inserted in the stack trace to indicate the restore point: "End of stack trace from the previous location where the exception was thrown". This is similar to the way inner exceptions or marshaled exceptions are indicated in stack traces. This method always throws an exception. It has a return value in order to write calling code like below so that the compiler also knows the code doesn't continue after this call: throw exception.Rethrow();

ThrowException is a helper/wrapper method that simply calls "throw exception;". This wrapper method exists so that the calling method (Rethrow) will indeed get inlined (having a direct throw in Rethrow causes it to not be inlined any more).

This overload checks for TrackingContext.Current and if found ensures that the TrackingId information is appended to the message passed to the Exception..ctor (if none is there already).

This overload ensures that the TrackingId information is appended to the message passed to the Exception..ctor (if none is there already).

This overload ensures that the TrackingId information is appended to the message passed to the Exception..ctor (if none is there already).

This overload ensures that the TrackingId information is appended to the message passed to the Exception..ctor (if none is there already).

This overload uses TrackingContext.Current and ensures that the TrackingId information is appended to the message passed to the Exception..ctor (if none is there already).

This overload ensures that the TrackingId information is appended to the message passed to the Exception..ctor (if none is there already).

This overload ensures that the TrackingId information is appended to the message passed to the Exception..ctor (if none there already).

Given a "Trace Source" object convert it to string. If the object is a string use that. If the object is a System.Type use its Name property. Otherwise call object.ToString().

Returned buffer must have been acquired via a call to TakeBuffer

causing RemainingTime() method to return the original timeout value everytime.

Gets localized string like: The ActionItem was scheduled for execution but has not completed yet.

Gets localized string like: An AsyncCallback threw an exception.

Gets localized string like: End cannot be called twice on the same AsyncResult.

Gets localized string like: An exception was thrown from a TransactionScope used to flow a transaction into an asynchronous operation.

Gets localized string like: This buffer cannot be returned to the buffer manager because it is the wrong size.

Gets localized string like: An incorrect IAsyncResult was provided to an 'End' method. The IAsyncResult object passed to 'End' must be the one returned from the matching 'Begin' or passed to the callback provided to 'Begin'.

Gets localized string like: An incorrect implementation of the IAsyncResult interface may be returning incorrect values from the CompletedSynchronously property or calling the AsyncCallback more than once.

Gets localized string like: A null value was returned from an asynchronous 'Begin' method or passed to an AsyncCallback. Asynchronous 'Begin' implementations must return a non-null IAsyncResult and pass the same IAsyncResult object as the parameter to the AsyncCallback.

Gets localized string like: Object synchronization method was called from an unsynchronized block of code.

Gets localized string like: You must cancel the previous timer before setting a new one.

Gets localized string like: --- End of inner exception stack trace ---

Gets localized string like: Exit() is called without successfully entering the semaphore.

Gets localized string like: The Key Name specified for the SharedAccessAuthorizationRule contains invalid or unsupported characters.

Gets localized string like: A SharedAccessAuthorizationRule requires a Primary Key of non-zero length.

Gets localized string like: A SharedAccessAuthorizationRule supports only base64 keys.

Gets localized string like: The argument {0} is null or empty.

Parameter 0 for string: The argument {0} is null or empty.

Gets localized string like: The IAsyncResult implementation '{0}' tried to complete a single operation multiple times. This could be caused by an incorrect application of IAsyncResult implementation or other extensibility code, such as an IAsyncResult that returns incorrect CompletedSynchronously values, or invokes the AsyncCallback multiple times.

Parameter 0 for string: The IAsyncResult implementation '{0}' tried to complete a single operation multiple times. This could be caused by an incorrect application of IAsyncResult implementation or other extensibility code, such as an IAsyncResult that returns incorrect CompletedSynchronously values, or invokes the AsyncCallback multiple times.

Gets localized string like: Number of string arguments passed to Etw WriteEvent has exceeded the maximum allowed limit of {0}.

Parameter 0 for string: Number of string arguments passed to Etw WriteEvent has exceeded the maximum allowed limit of {0}.

Gets localized string like: Number of arguments passed to Etw WriteEvent has exceeded the maximum allowed limit of {0}.

Parameter 0 for string: Number of arguments passed to Etw WriteEvent has exceeded the maximum allowed limit of {0}.

Gets localized string like: Etw registration failed with error code {0}.

Parameter 0 for string: Etw registration failed with error code {0}.

Gets localized string like: An incorrect implementation of the IAsyncResult interface may be returning incorrect values from the CompletedSynchronously property or calling the AsyncCallback more than once. The type {0} could be the incorrect implementation.

Parameter 0 for string: An incorrect implementation of the IAsyncResult interface may be returning incorrect values from the CompletedSynchronously property or calling the AsyncCallback more than once. The type {0} could be the incorrect implementation.

Gets localized string like: An unexpected failure occurred. Applications should not attempt to handle this error. For diagnostic purposes, this English message is associated with the failure: {0}.

Parameter 0 for string: An unexpected failure occurred. Applications should not attempt to handle this error. For diagnostic purposes, this English message is associated with the failure: {0}.

Gets localized string like: A de-queue operation timed out after {0}. The time allotted to this operation may have been a portion of a longer timeout.

Parameter 0 for string: A de-queue operation timed out after {0}. The time allotted to this operation may have been a portion of a longer timeout.

Gets localized string like: Argument {0} must be a non-negative timeout value. The provided value was {1}.

Parameter 0 for string: Argument {0} must be a non-negative timeout value. The provided value was {1}. Parameter 1 for string: Argument {0} must be a non-negative timeout value. The provided value was {1}.

Gets localized string like: Argument {0} must be a positive timeout value. The provided value was {1}.

Parameter 0 for string: Argument {0} must be a positive timeout value. The provided value was {1}. Parameter 1 for string: Argument {0} must be a positive timeout value. The provided value was {1}.

Gets localized string like: The operation did not complete within the allotted timeout of {0}. The time allotted to this operation may have been a portion of a longer timeout. For more information on exception types and proper exception handling, please refer to http://go.microsoft.com/fwlink/?LinkId=761101

Parameter 0 for string: The operation did not complete within the allotted timeout of {0}. The time allotted to this operation may have been a portion of a longer timeout. For more information on exception types and proper exception handling, please refer to http://go.microsoft.com/fwlink/?LinkId=761101

Gets localized string like: An unrecoverable error occurred. For diagnostic purposes, this English message is associated with the failure: '{0}'.

Parameter 0 for string: An unrecoverable error occurred. For diagnostic purposes, this English message is associated with the failure: '{0}'.

Gets localized string like: The maximum number of resources of type {0} has been reached or exceeded. Actual: {1}, Max allowed: {2}.

Parameter 0 for string: The maximum number of resources of type {0} has been reached or exceeded. Actual: {1}, Max allowed: {2}. Parameter 1 for string: The maximum number of resources of type {0} has been reached or exceeded. Actual: {1}, Max allowed: {2}. Parameter 2 for string: The maximum number of resources of type {0} has been reached or exceeded. Actual: {1}, Max allowed: {2}.

Gets localized string like: The argument {0} is null or white space.

Parameter 0 for string: The argument {0} is null or white space.

Gets localized string like: The enumeration value {0} is unsupported.

Parameter 0 for string: The enumeration value {0} is unsupported.

Gets localized string like: The operation {0} is not allowed.

Parameter 0 for string: The operation {0} is not allowed.

Gets localized string like: The operation {0} is not supported for the {1} transport type.

Parameter 0 for string: The operation {0} is not supported for the {1} transport type. Parameter 1 for string: The operation {0} is not supported for the {1} transport type.

Gets localized string like: The entity {0} has an auto-forwarding policy to itself.

Parameter 0 for string: The entity {0} has an auto-forwarding policy to itself.

Gets localized string like: The attribute '{0}' for configuration element '{1}' cannot be null or empty.

Parameter 0 for string: The attribute '{0}' for configuration element '{1}' cannot be null or empty. Parameter 1 for string: The attribute '{0}' for configuration element '{1}' cannot be null or empty.

Gets localized string like: Multiple transport setting elements are not allowed in '{0}' section. Make sure only one is defined.

Parameter 0 for string: Multiple transport setting elements are not allowed in '{0}' section. Make sure only one is defined.

Gets localized string like: Dictionary key {0} is being modified by a different transaction.

Parameter 0 for string: Dictionary key {0} is being modified by a different transaction.

Gets localized string like: Dictionary key {0} does not exist

Parameter 0 for string: Dictionary key {0} does not exist

Gets localized string like: The argument {0} has {2} characters, it cannot exceed {1} characters

Parameter 0 for string: The argument {0} has {2} characters, it cannot exceed {1} characters Parameter 1 for string: The argument {0} has {2} characters, it cannot exceed {1} characters Parameter 2 for string: The argument {0} has {2} characters, it cannot exceed {1} characters

Gets localized string like: The Key Name specified for the SharedAccessAuthorizationRule exceeds the limit of {0} characters.

Parameter 0 for string: The Key Name specified for the SharedAccessAuthorizationRule exceeds the limit of {0} characters.

Gets localized string like: The Key specified for the SharedAccessAuthorizationRule exceeds the limit of {0} characters.

Parameter 0 for string: The Key specified for the SharedAccessAuthorizationRule exceeds the limit of {0} characters.

Gets localized string like: A SharedAccessAuthorizationRule only supports keys of size {0} bytes.

Parameter 0 for string: A SharedAccessAuthorizationRule only supports keys of size {0} bytes.

Gets localized string like: The argument is out of range. It should be between {0} and {1}.

Parameter 0 for string: The argument is out of range. It should be between {0} and {1}. Parameter 1 for string: The argument is out of range. It should be between {0} and {1}.

Gets localized string like: The requested partition count exceeded the maximum partitions allowed for Namespace: {0}. Maximum allowed partitions per thoughput unit: {1}. Current throughput units: {2}. Current partition count: {3}. Requested partition count: {4}, whereas, available partition count: {5}. Increase through put units of the Service Bus Namespace to be able to create more partitions.

Parameter 0 for string: The requested partition count exceeded the maximum partitions allowed for Namespace: {0}. Maximum allowed partitions per thoughput unit: {1}. Current throughput units: {2}. Current partition count: {3}. Requested partition count: {4}, whereas, available partition count: {5}. Increase through put units of the Service Bus Namespace to be able to create more partitions. Parameter 1 for string: The requested partition count exceeded the maximum partitions allowed for Namespace: {0}. Maximum allowed partitions per thoughput unit: {1}. Current throughput units: {2}. Current partition count: {3}. Requested partition count: {4}, whereas, available partition count: {5}. Increase through put units of the Service Bus Namespace to be able to create more partitions. Parameter 2 for string: The requested partition count exceeded the maximum partitions allowed for Namespace: {0}. Maximum allowed partitions per thoughput unit: {1}. Current throughput units: {2}. Current partition count: {3}. Requested partition count: {4}, whereas, available partition count: {5}. Increase through put units of the Service Bus Namespace to be able to create more partitions. Parameter 3 for string: The requested partition count exceeded the maximum partitions allowed for Namespace: {0}. Maximum allowed partitions per thoughput unit: {1}. Current throughput units: {2}. Current partition count: {3}. Requested partition count: {4}, whereas, available partition count: {5}. Increase through put units of the Service Bus Namespace to be able to create more partitions. Parameter 4 for string: The requested partition count exceeded the maximum partitions allowed for Namespace: {0}. Maximum allowed partitions per thoughput unit: {1}. Current throughput units: {2}. Current partition count: {3}. Requested partition count: {4}, whereas, available partition count: {5}. Increase through put units of the Service Bus Namespace to be able to create more partitions. Parameter 5 for string: The requested partition count exceeded the maximum partitions allowed for Namespace: {0}. Maximum allowed partitions per thoughput unit: {1}. Current throughput units: {2}. Current partition count: {3}. Requested partition count: {4}, whereas, available partition count: {5}. Increase through put units of the Service Bus Namespace to be able to create more partitions.

Gets localized string like: The maximum number of entities for namespace has been reached or exceeded. Actual: {0}, Max allowed: {1}.

Parameter 0 for string: The maximum number of entities for namespace has been reached or exceeded. Actual: {0}, Max allowed: {1}. Parameter 1 for string: The maximum number of entities for namespace has been reached or exceeded. Actual: {0}, Max allowed: {1}.

Represents the Azure Active Directory token provider for the Service Bus and Event Hubs.

Descriptor is restricted to symbol and ulong

Encoding of DescribedType(symbol/ulong, list) is not efficient if the descriptor and the list fields are pre-defined, e.g. the performatives and other types used by the protocol.

Multiple is not an AMQP data type. It is a property of a list field that affects the encoding of the associated data type.

This initiator establishes a base transport using the transport settings Then it iterates through the security provider list in the settings to upgrade the transport (e.g. tcp -> tls -> sasl).

This listener supports protocol upgrade (e.g. tcp -> tls -> sasl)

This initiator establishes an SSL connection (no AMQP security upgrade)

This listener accepts SSL transport directly (no AMQP security upgrade)

Returns true if connect is pending, the callback is invoked upon completion. Returns false if connect is completed synchronously, the callback is not invoked.

Supported versions in preferred order.

The purpose of this class open/maintain the AmqpConnection

Enumerates the encoding type associated with the serialization.

The List encoding type.

The Map encoding type.

This WCF Message Property allows you to specify AMQP ApplicationProperties to be set when the WCF Message is converted to an AMQP message.

Client receives the announced server mechanisms.

Server receives the client init that may contain the initial response message.

Client receives the sasl outcome from the server.

Disable redirection if it's enabled

Represents the Advanced Message Queuing Protocol transport settings.

Initializes a new instance of the class.

Gets a value that indicates whether the SSL stream uses a custom binding element.

true if the SSL stream uses a custom binding element; otherwise, false.

Gets or sets the maximum frame size.

The maximum frame size.

Gets or sets the batch flush interval associated with the transport.

The batch flush interval associated with the transport.

Gets or sets a value indicating whether the runtime metric of a receiver is enabled.

true if a client wants to access using .

Gets or sets a value indicating whether this transport is ready to be redirected to the server backend.

true if this transport wants to participate in redirect allowed by the server.

Creates a new object that is a copy of the current instance.

A new object that is a copy of this instance.

Provides a single place to encode and decode AMQP premitives Encode and decode AMQP framing types.

Implements the AMQP 1.0 connection.

returns open sessions

The base class for AMQP connection. It should be version independent.

doesn't clone - RemoteSettings: HostName/ContainerId

Constants for the protocol stack. Extended constants should be defined in ClientConstants.cs

Implements the transport-layer link, including link command handling and link flow control.

Implements the AMQP MESSAGE FORMAT 0 message.

Message is composed of different sections. Sections are settable/mutable.

Allow updates in mutalble sections. Note: currently this is only used by relay.

Wraps a stream in the message body. The data is sent in one or more Data sections.

Message is constructed from a buffer. Sections are not settable. Though not strictly enforced, section properties SHOULD NOT be updated as the change will be lost. To update a buffer message, clone it first and update the cloned message instead.

Move to End state without closing

Close with exception handling

Providers should be added in preferred order.

A reader that pumps frames from the transport and hands it over to the handler

A reader that reads specified bytes and notifies caller upon completion (pull).

A reader that reads AMQP frame buffers. Not thread safe.

A writer that writes buffers. Buffer writes may be batched. Writer owns closing the transport.

A writer that writes fixed-size buffer and notify caller upon completion.

Encode and decode data within the AMQP type system.

Decoding from AMQP decimal to C# decimal can lose precision and can also cause OverflowException.

make it convenient to deal with nullable types also set the default value if the field is null

Designed for session channel and link handle lookup. Not for general purpose uses.

Use this only if the enumeration is best effort only

The different this class from the normal Queue is that if we specify a size then we will perform Amqp Flow based on the size, where: - When en-queuing (cache message from service) we will keep sending credit flow as long as size is not over the cache limit. - When de-queuing (return message to user) we will issue flow as soon as the size is below the threshold (70%). - When issuing credit we always issue in increment of boundedTotalLinkCredit - boundedTotalLinkCredit is based on [total cache size] / [max message size] - [total cache size] has a 90% cap to try to prevent overflow - but does not enforce it. - we keep updating [max message size] as we receive message in flow.

This method updates the credit that we will send to service to fetch more data based on the current average message size. Only call this method if we already check and cache credit is within range (> 0%, < 90%).

RFC1982: http://tools.ietf.org/html/rfc1982

Work is serialized. Each work is retried until it is completed

A data structure that represents the events sent and received from an Event Hub stream.

Returns .

Returns .

Returns .

Performs abort functionality on the messaging entity.

Sends a cleanup message to Service Bus to signal the completion of the usage of an entity.

In the event of any exceptions, the method will perform an abort on the entity before throwing the exception.

Sends a cleanup message asynchronously to Service Bus to signal the completion of the usage of an entity.

In the event of any exceptions, the method will perform an abort on the entity before throwing the exception. If an exception occurs, this method performs an abort operation on the entity before throwing the exception.

For internal use only. Do not inherit from this class.

Returns .

Returns .

A helper class for creating a batch of EventData objects to be used for SendBatch or SendBatchAsync call.

Creates a batch with the specified maximum size in bytes.

The maximum size of the serialized batch message, a value of -1 indicates the allowed buffer size is unknown. It is recommended to call or to create an instance of this class because it uses the maximum message size negotiated with the service. When the application creates a batch using the constructor, it is responsible to ensure the maxSizeInBytes is permitted by the service.

Gets the current event count in the batch.

Tries to add an event data to the batch if permitted by the batch's size limit.

The to add. A boolean value indicating if the event data has been added to the batch or not. Thrown when the EventData is null. Thrown when the batch is already disposed. This method checks the sizes of the batch, the EventData object and the specified limit to determine if the EventData object can be added. It does not perform other validations on the current batch and the EventData object. It is possible that the application may get exceptions from the send call if the batched EventData objects cannot be sent in a batch. For example, they contain different values. For an unknown buffer size (indicated by a -1 for MaxSize during construction) special handling is done: 1. Small messages are added up to a 256k limit, which will work for both "Basic" and "Standard" Event Hub namespace types. 2. If the first message is > 256k then it is allowed up to a 4MB maximum size with no further messages allowed. The SendBatch will fail if the EventHub namespace doesn't support that size.

Converts the batch to an IEnumerable of EventData objects that can be accepted by the SendBatch or SendBatchAsync method.

Returns an IEnumerable of EventData objects.

Disposes the EventData objects contained in this batch.

Returns Event Hubs runtime information, which is required for creating or objects.

Gets or sets the path to the Event Hub.

Returns .

Gets or sets the time at which the Event Hub was created.

Returns .

Gets or sets the number of partitions in an Event Hub.

Returns .

Gets or sets the partition ID for an Event Hub.

Returns .

Defines the runtime options when registering an interface with an . This is also the mechanism for catching exceptions from an instance used by an EventProcessorHost object.

This event fires whenever an exception is encountered when processing events. User can register an handler to this event for getting exception notification.

Gets or sets the maximum event count that a user is willing to accept for processing per receive loop. This count is on a per-Event Hub partition level.

Returns . This corresponds to the maxCount argument in

Gets or sets the timespan in which the user is willing to wait when the event processor is performing a receive operation.

Returns . This correspond to the waitTime argument in

Gets or sets the number of events that any receiver in the currently owned partition will actively cache. The default value for this property is 300.

Returns . This property is use to set property on the underlying MessagingFactory created by host

Gets or sets a delegate which is used to get the initial offset for a given partition to create . Delegate is invoked by passing in PartitionId and then user can return either the starting offset as string or starting UTC time for receiving messages. This is only used when is not provided and receiver is being created for the very first time. This corresponds to either or depending on the type of return value from delegate.

Enabling this option will cause to be invoked after every ReceiveTimeout when there are no more messages in the stream for a partition.

By default this option is turned off.

Gets the default options, which is 10 for the , and 1 minute for the property.

Returns .

Gets or sets a value indicating whether the runtime metric of a receiver is enabled.

true if a client wants to access using .

Defines a position of an in the event hub partition. The position can be one of , or .

Returns the position for the start of a stream. Provide this position in receiver creation to starting receiving from the first available event in the partition.

Returns the position for the end of a stream. Provide this position in receiver creation to start receiving from the next available event in the partition after the receiver is created.

Creates a position at the given offset.

If true, the event at given offset is included; otherwise the next event is returned. An object.

Creates a position at the given sequence number.

If true, the event at given sequence number is included; otherwise the next event is returned. An object.

Creates a position at the given enqueued time. Events after this time are returned.

An object.

This is the base abstract class that all clients for messsaging entities like topics, queues, and subscriptions.

Gets the queue's, topic's, or subscription's path relative to the base address.

The queue's, topic's, or subscription's path relative to the base address.

Represent the type of action the ip that match the IpFilter is applied to.

If an Ip is matched, the Ip is rejected from connecting to the service.

If an Ip is matched, the connection is allowed.

This is done to help json and other deserializers

Initializes a new instance of the class using default values.

Initializes a new instance of the class using specified lease.

The messaging lease.

Initializes a new instance of the class using specified lease and the error that caused the exception.

The messaging lease. The error that caused the exception.

Initializes a new instance of the class using specified error message.

The message associated with the error.

Initializes a new instance of the class using specified error message and inner exception.

The message associated with the error. The error that caused the exception.

Initializes a new instance of the class using specified information and context.

The serialized information about the exception. The contextual information about the source or destination.

Populates a with the data needed to serialize the target object.

The object to populate with data. The destination (see StreamingContext) for this serialization.

Represents the exception in conflicting broker managment calls.

Initializes a new instance of the class with a specified error message and a reference to the inner exception that is the cause of this exception.

The error message that explains the reason for the exception. The exception that is the cause of the current exception.

Constructor.

Name of the entity. The TrackingContext. Optional inner exception

Initializes a new instance of the class with a specified error message and a reference to the inner exception that is the cause of this exception.

/// The exception detail. The TrackingContext.

Represents options can be set during the creation of a event hub receiver.

Gets or sets the identifier of a receiver.

A string representing the identifier of a receiver. It will return null if the identifier is not set. Thrown if the length of the value is greater than the maximum length of 64.

Gets or sets a value indicating whether the runtime metric of a receiver is enabled.

true if a client wants to access using .

Enumerates the reason for closing of session.

Specifies that the server is shutting down.

Specifies that the current lease has been lost.

Provides the names (as fields) of all the system properties that Service Bus automatically updates.

Specifies the publisher of the event data.

Specifies the partition key for sending a transactional message to a queue or topic that is not session-aware.

Specifies the read offset of the event data.

Specifies the unique number assigned to a message by Service Bus.

Specifies the date and time of the sent time in UTC.

A client class used in send operations for an Event Hub. Represents a logical sender connection to a specific Event Hub partition.

Gets the path of the Event Hub.

The Event Hub path.

Gets the partition ID for a logical partition of an Event Hub.

The partition identifier.

Creates a new instance of using the supplied connection string. Intended to be used to send using a ConnectionString with SharedAcessSignature and Publisher.

The connection string used. The created The connection can be obtained either from the Azure portal, or created from a instance.

Creates a batch where event data objects can be added for later SendBatch or SendBatchAsync call.

Returns .

Sends event data to the logical partition represented by .

The to send.

Asynchronous version of .

The to send. The task representing the asynchronous operation.

Sends a batch of event data to the logical partition represented by .

An IEnumerable object containing event data instances. Thrown if the total serialized size of exceeds the allowed size limit for one event transmission (256k by default). User should make sure the total serialized size of should be under the size limit of one event data transmission, which is 256k by default.

Asynchronously sends a batch of event data to the logical partition represented by .

An IEnumerable object containing event data instances. Returns . Thrown if the total serialized size of exceeds the allowed size limit for one event transmission (256k by default). User should make sure the total serialized size of should be under the size limit of one event data transmission, which is 256k by default.

An object used to checkpoint with EventHub the progress of message stream. This is provided through to user code, so it can be used to checkpoint their progress with EventHub.

Call this method to checkpoint progress with EventHub. Make sure to call this method once all the messages in a batch are processed. It will throw if the lease for partition already expired when this is called.

A task to indicate Checkpoint is complete.

Call this method to checkpoint progress with EventHub by providing your own offset. This is useful if you are handling off events to downstream processing asynchronously. I throws ArgumentOutOfRangeException if object is something we have never seen or we have already checkpointed belonging to an event ahead in the stream.

EventData to use for checkpointing the state of stream.

Provides methods for running checkpoint asynchronously. Extensibility is provided to specify host-specific storage for storing the offset. This is provided when is called, to checkpoint the offset position using .

Stores the offset of a particular partition in the host-specific store.

Partition information against which to perform a checkpoint. Current position in the stream. The sequence number of the partition. Returns .

Contains partition ownership information.

Initializes a new instance of the class.

Initializes a new instance of the class with the specified value as reference.

The specified instance where its property values will be copied from.

Gets the ID of the partition to which this lease belongs.

The partition identifier.

Gets or sets the host owner for the partition.

The host owner of the partition.

Gets or sets the lease token that manages concurrency between hosts. You can use this token to guarantee single access to any resource needed by the object.

The lease token.

Gets or sets the epoch year of the lease, which is a value you can use to determine the most recent owner of a partition between competing nodes.

The epoch year of the lease.

Gets or sets the current value for the offset in the stream.

The lease offset.

Gets or sets the last checkpointed sequence number in the stream.

Returns .

Determines whether the lease is expired.

true if the lease is expired; otherwise, false.

Determines whether this instance is equal to the specified object.

The object to compare. true if this instance is equal to the specified object; otherwise, false.

Returns the hash code of the current instance.

The hash code of the current instance.

Represents an exception that occurs when the service lease has been lost.

Initializes a new instance of the class using default values.

Initializes a new instance of the class using specified lease.

The messaging lease.

Initializes a new instance of the class using specified lease and the error that caused the exception.

The messaging lease. The error that caused the exception.

Initializes a new instance of the class using specified error message.

The message associated with the error.

Initializes a new instance of the class using specified error message and inner exception.

The message associated with the error. The error that caused the exception.

Initializes a new instance of the class using specified information and context.

The serialized information about the exception. The contextual information about the source or destination.

Gets or sets the service lease.

The service lease.

Populates a with the data needed to serialize the target object.

The object to populate with data. The destination (see StreamingContext) for this serialization.

Enumerates the type of messaging cursor.

The server cursor type.

The client cursor type.

Represents the factory for the default event processor.

The type of the event.

Initializes a new instance of the class.

Initializes a new instance of the class using the specified instance.

The instance.

Creates an event processor.

The partition context. The created event processor.

An anchor class used to send and receive events to and from an Event Hub.

Gets or sets the number of events that any receive operation will actively cache. By default, this value is inherited from if the current instance is created from the factory method. Otherwise, the default value is 10,000.

The number of messages that the message receiver can simultaneously request. Thrown if the value is less than the minimum required value of 10. Note that setting the count too low will affect the effective performance of the Event Hub receive call.

Gets or sets the maximum size (in bytes) in total that any receive operation will actively cache. The size of each event data is determined by the property.

Returns . Thrown when the size value is less than the minimum required value of 260K bytes. The size limit is not an absolute limit, and can go over by as much as (PrefetchSizeInBytes/256kBytes) number of event worth of bytes. Any created from this instance will inherit this value by default. Changes to this value will not be propagated to already created consumer group, but will be used by new created after the change. Also setting this value to non-null value will set to zero. Note that setting the size too low will affect the effective performance of the Event Hub receive call.

Gets the path of the Event Hub.

The path of the Event Hub.

Gets or sets a value to indicate if entity level perf counters should be collected in memory. Note that this only affect entity level counters, and namespace level counters are always collected.

By default this is set to false - meaning by default we do collect entity level perf counters. Setting this value will not affect existing collected counters, and will only stop counters from new entity being collected.

Creates a new instance of the instance, using a connection string from the application configuration settings.

The path to the Event Hub. The newly created Event Hub client object. This method will attempt to retrieve the connection string information from either app.config, or web.config files. User must supply the connection string using the "AppSettings" section of the configuration. The format of the section is as follows:

Creates a new instance of the by using Azure Active Directory authentication context.

Fully qualified domain name for Event Hubs. Most likely, {yournamespace}.servicebus.windows.net The path to the Event Hub. AuthenticationContext for AAD. The app credential. that specifies how long the messaging operation has to complete before timing out Value indicating whether this transport is ready to be redirected to the server backend. The newly created Event Hub client object.

Creates a new instance of the by using Azure Active Directory authentication context.

Fully qualified domain name for Event Hubs. Most likely, {yournamespace}.servicebus.windows.net The path to the Event Hub. AuthenticationContext for AAD. The client assertion certificate credential. that specifies how long the messaging operation has to complete before timing out Value indicating whether this transport is ready to be redirected to the server backend. The newly created Event Hub client object.

Creates a new instance of the by using Azure Active Directory authentication context.

Fully qualified domain name for Event Hubs. Most likely, {yournamespace}.servicebus.windows.net The path to the Event Hub. AuthenticationContext for AAD. ClientId for AAD. The user password credential. that specifies how long the messaging operation has to complete before timing out Value indicating whether this transport is ready to be redirected to the server backend. The newly created Event Hub client object.

Creates a new instance of the by using Azure Active Directory authentication context.

Fully qualified domain name for Event Hubs. Most likely, {yournamespace}.servicebus.windows.net The path to the Event Hub. AuthenticationContext for AAD. ClientId for AAD. The redrectUri on Client App. Platform parameters User Identifier that specifies how long the messaging operation has to complete before timing out Value indicating whether this transport is ready to be redirected to the server backend. The newly created Event Hub client object.

Creates a new instance of the by using Azure Managed Service Identity authentication.

Fully qualified domain name for Event Hubs. Most likely, {yournamespace}.servicebus.windows.net The path to the Event Hub. that specifies how long the messaging operation has to complete before timing out Value indicating whether this transport is ready to be redirected to the server backend. The newly created Event Hub client object.

Creates a new instance of the Event Hubs client using the specified connection string. Use this overload only when the connection string does not use the property.

The connection string to be used. The path to the Event Hub. The newly created object. The connection can be obtained either from the Azure portal, or created from a instance. Thrown when the format of the parameters is incorrect.

Creates a new instance of the Event Hubs client using the specified connection string. You can populate the property with the name of the Event Hub.

The connection string to use. The newly created object. Thrown when the format of the parameter is incorrect. The connection can be obtained either from the Azure portal, or created from a instance. Thrown when the format of the parameter connectionString is incorrect. Sample showing how to populate the EntityPath in connectionString var connectionStringBuilder = new ServiceBusConnectionStringBuilder(connectionString); connectionStringBuilder.EntityPath = eventHubDescription.Path; var eventHubClient = EventHubClient.CreateFromConnectionString(connectionStringBuilder.ToString());

Sends event data to an Event Hub.

The event data.

Asynchronously sends event data to an Event Hub.

The to send. The task representing the asynchronous operation.

Sends a batch of event data.

An IEnumerable object containing event data instances. User should make sure the total serialized size of should be under the size limit of one event data transmission, which is 256k by default. Also note that there will be some overhead to form the batch. Thrown if the total serialized size of exceeds the allowed size limit for one event transmission (256k by default).

Asynchronously sends a batch of event data.

An IEnumerable object containing event data instances. User should make sure the total serialized size of should be under the size limit of one event data transmission, which is 256k by default. Also note that there will be some overhead to form the batch. Returns . Thrown if the total serialized size of exceeds the allowed size limit for one event transmission (256k by default).

Creates a batch where event data objects can be added for later SendBatch or SendBatchAsync call.

Returns .

Creates an Event Hubs sender for the specified publisher.

The publisher identifier. Returns .

Asynchronous version of .

The publisher identifier. Returns .

Creates an Event Hubs sender for the specified Event Hubs partition.

The ID of the partition. Returns the object.

Asynchronous version of .

The ID of the partition. Returns .

Asynchronous version of .

Returns .

Retrieves Event Hubs runtime information, which is required for creating or objects.

Returns .

Asynchronous version of .

The partition ID. Returns .

Retrieves runtime information for the specified partition of the Event Hub.

The partition ID. Returns .

Returns the default consumer group, for the receive operation of event data.

The default . Default ConsumerGroup cannot perform checkpoint operations. To perform checkpoint operations, user should create a explicit ConsumerGroup

Returns the consumer group with the specified name, for the receive operation of event data.

The name of the group. A instance, corresponding to the consumer group.

Executes the abort action.

Executes the close action.

The wait time before the operation times out.

Executes the begin close action.

The wait time before the operation times out. An delegate that references the method to invoke when the operation is complete. A user-defined object that contains information about the receive operation. This object is passed to the EndClose delegate when the operation is complete. An that references the asynchronous Close operation.

Executes the end close action.

An that references the asynchronous Close operation.

Executes the begin open action.

The wait time before the operation times out. An delegate that references the method to invoke when the operation is complete. A user-defined object that contains information about the receive operation. This object is passed to the EndOpen delegate when the operation is complete. An that references the asynchronous Open operation.

Executes the end open action.

An that references the asynchronous Open operation.

Creates the Event Hubs sender. This method is for internal use, and not meant to be called from user code.

The task representing the asynchronous operation.

Represents the metadata description of an Event Hub.

Initializes a new instance of the class.

The path of the event hub relative to the service namespace base address.

Gets the full path of the Event Hub.

The path of the Event Hub. Thrown if an attempt is made to set the value of this property when the instance is marked as readonly. This is a relative path to the .

Gets or sets the number of days to retain the events for this Event Hub.

The retention time of the event data, in days.

Gets the name of the collection.

The name of the collection.

Gets the .

The .

Gets or sets the ArchiveDescription for the EventHub.

ArchiveDescription

Gets or sets the current status of the Event Hub (enabled or disabled).

The current status of the event hub. This status does not get updated real time. To get up-to-date status, refresh the description with the method

Gets the exact time the message was created.

The exact time the message was created.

Gets the exact time the message has been updated.

The time the message has been updated.

Gets or sets the user metadata.

The user metadata.

Gets or sets the current number of shards on the Event Hub.

Returns the number of subscriptions on the Event Hub. Thrown if the partition count value is negative.

Gets identifiers for partitions created for Event Hubs.

Returns .

Represents a description of the consumer group.

Initializes a new instance of the class.

The path of the event hub. The name of the subscription.

Gets or sets the path of the event hub.

This is a relative path to the . The path of the Event Hub.

Gets the name of the consumer group description.

The name of the consumer group description.

Gets the name of the collection.

The name of the collection.

Gets the exact time the message was created.

The exact time the message was created.

Gets the exact time the message has been updated.

The time the message has been updated.

Gets or sets the user metadata.

The user metadata.

Gets or sets the enable checkpoint flag. Setting this will allow receivers created from this ConsumerGroup to use the method.

A client class used in receive operations related to an Event Hub consumer group. Represents a logical receiver connection to a specific Event Hub partition within a consumer group.

Gets the starting offset for this receiver. The method starts receiving the next event after this offset value. If the value is null, the receiver starts receiving events from the beginning of the Event Hubs event stream.

The starting offset. This starting offset ties to one partition only, represented by .

Gets the starting date and time in UTC format for this receiver. The method starts receiving the next event after this value. If null, the receiver starts receiving events from the beginning of the Event Hubs event stream.

The starting date and time in UTC. Service only uses this datetime as an approximation when delivering next event. Keep in mind that there can be clock skew between client time and service time, so user application should be designed to handle duplication in event delivery.

Gets the starting sequence number for this receiver. The method starts receiving the next event after this value.

The starting sequence number (exclusive). A null value means that the receiver was created with an offset or a date time. This starting offset ties to one partition only, represented by .

Gets the event hub path.

The event hub path.

Gets the name of the Event Hub.

The name of the Event Hub.

Gets the epoch value that is used to determine partition ownership during the receive operation.

Returns .

Gets the partition ID for a logical partition of an Event Hub.

The partition identifier.

Gets a value indicating whether is treated as an inclusive offset, meaning that the first event returned is the event that contains the starting offset. Normally, the first event returned is the event after the starting offset.

Returns .

Gets or sets the number of events that any receive operation will actively cache. By default, this value is inherited from . The default value is 300.

The number of messages that the message receiver can simultaneously request. Thrown if the value is less than the minimum required value of 10. Changes to this value will be used in next receive operation, however this does not affect the number of events already cached by the receiver. Setting this property to non-zero value will set to null. Note that setting the count too low will affect the effective performance of the event hub receive call.

Gets or sets the maximum size (in bytes) in total that any receive operation will actively cache. The size of each event data is determined by the property.

Returns . Thrown when the size value is less than the minimum required value of 260K bytes. The size limit is not an absolute limit. the size might go over by at least one event data worth of size. Changes to this value will be used in next receive operation, however this does not affect the number of events already cached by the receiver. Setting this property to non-null value will set to zero. Note that setting the size too low will affect the effective performance of the event hub receive call.

Gets the approximate receiver runtime information for a logical partition of an Event Hub. To enable the setting, refer to and

Gets a value indicating whether the runtime metric of a receiver is enabled.

Gets the identifier of a receiver which was set during the creation of the receiver.

A string representing the identifier of a receiver. It will return null if the identifier is not set.

Gets the value that indicate whether Checkpoint is enabled for the ConsumerGroup that this receiver belongs to.

This boolean reflects the same value as . However keep in mind that if user recreate the ConsuemrGroup with a different value this property will not get updated.

Receives Event Hubs event data.

Returns the received object, or null if no event data is available. Thrown if the service encounters a transient error. Thrown if the client has a problem connecting to the service. Thrown if the current namespace is placing too much load on the system. Thrown if another receiver with a higher value is connected as the current receiver to the same partition specified by .

Receives Event Hubs event data with the specified timeout value.

The maximum time the user is willing to wait for event data to arrive. Returns the received collection, or null if there is no event data available. Thrown if the service encounters a transient error. Thrown if the client has a problem connecting to the service. Thrown if the current namespace is placing too much load on the system. Thrown if another receiver with a higher value is connected as the current receiver to the same partition specified by . is not a guaranteed wait time, as API will return data as soon as it is available.

Asynchronous version of .

The task representing the asynchronous operation.

Asynchronous version of .

The maximum time the user is willing to wait for event data to arrive. The task representing the asynchronous operation. is not a guaranteed wait time, as API will return data as soon as it is available.

Receives Event Hubs event data, up to the specified count.

The maximum amount of event data the user is willing to accept in one call. Returns the received collection. The collection is either empty if no event is returned within the specified time, or all events up to are returned. Thrown if the service encounters a transient error. Thrown if the client has a problem connecting to the service. Thrown if the current namespace is placing too much load on the system. Thrown if another receiver with a higher value is connected as the current receiver to the same partition specified by . Service does not wait for events to be filled before returning to user. It returns as soon as there are any events available.

Receives Event Hubs event data, up to the specified count with the specified timeout value.

The maximum amount of event data the user is willing to accept in one call. The maximum time the user is willing to wait for event data to arrive. Returns the received collection. The collection is either empty if no event is returned within the specified time, or all events up to are returned. Thrown if the service encounters a transient error. Thrown if the client has a problem connecting to the service. Thrown if the current namespace is placing too much load on the system. Thrown if another receiver with a higher value is connected as the current receiver to the same partition specified by . is not a guaranteed wait time, as API will return data as soon as it is available. Also service does not wait for events to be filled before returning to user. it returns as soon as there are any events available.

Asynchronous version of .

The maximum amount of event data the user is willing to accept in one call. Returns . Service does not wait for events to be filled before returning to user. It returns as soon as there are any events available.

Asynchronous version of .

The maximum amount of event data the user is willing to accept in one call. The maximum time the user is willing to wait for event data to arrive. Returns . is not a guaranteed wait time, as API will return data as soon as it is available. Also service does not wait for events to be filled before returning to user. It returns as soon as there are any events available.

Checkpoint the current event data's offset. This signal the system that next data delivery will be after this offset.

The to be checkpoint. throws if service encounter transient error throws if client has problem connecting to the service throws if another receivers with higher value has connected to the same partition (as denoted by as this current receiver throws if is null throws if this receiver belongs to a ConsumerGroup that has set to false.

Checkpoint the current event data's offset. This signal the system that next data delivery will be after this offset.

The to be checkpoint. throws if service encounter transient error throws if client has problem connecting to the service throws if current user namespace is generating too much load on the system. throws if another receivers with higher value has connected to the same partition (as denoted by as this current receiver throws if is null throws if this receiver belongs to a ConsumerGroup that has set to false.

Represents the consumer group within an Event Hub. This class creates receivers for a specific consumer group within an Event Hub. This can be the default consumer group or another user-created consumer group.

The name of the default ConsumerGroup that is pre-created when creating EventHub.

The constant that denotes the start of a stream. This can be used as an offset argument in receiver creation.

// the following code snippet creates a receiver that receive events // from the first partitions of the default consumer gorup. // assume we have obtained the description which will gives us the partition ids. EventHubDescription description; EventHubClient client = EventHubClient.CreateFromConnectionString(connection); var defaultGroup = client.GetDefaultConsumerGroup(); var receiver = defaultGroup.CreateReceiver( description.PartitionIds.First(), EventHubConsumerGroup.StartOfStream); var eventData = receiver.Receive();

The constant that denotes the end of a stream. This can be used as an offset argument in receiver creation to start receiving from the latest event, instead of a specific point in time/offset value.

// the following code snippet creates a receiver that receive events // from the first partitions of the default consumer gorup. // assume we have obtained the description which will gives us the partition ids. EventHubDescription description; EventHubClient client = EventHubClient.CreateFromConnectionString(connection); var defaultGroup = client.GetDefaultConsumerGroup(); var receiver = defaultGroup.CreateReceiver( description.PartitionIds.First(), EventHubConsumerGroup.EndOfStream); var eventData = receiver.Receive();

Internal constructor of the EventHubConsumerGroup. This is only for internal uses

The parent factory for creation path of the parent EventHub name of the ConsumerGroup the prefetch count of ConsumerGroup which will be used by the receviers the prefetch size of the ConsumerGroup Constructor is marked internal to prevent external assemblies inheriting from it.

Gets or sets the number of events that any receive operation will actively cache. By default, this value is inherited from . The default value is 10,000.

The number of events that the receiver can cache. Thrown if the value is less than the minimum required value of 10. Any created from this instance will inherit this value by default. Changes to this value will not be propagate to already created receiver, but will be used by new created after the change. Also setting this property to non-zero will set to null. Note that setting the count too low will affect the effective performance of the event hub receive call.

Gets or sets the maximum size (in bytes) in total that any receive operation will actively cache. The size of each event data is determined by the property.

Returns . Thrown when the size value is less than the minimum required value of 260K bytes. The size limit is not an absolute limit. the size might go over by at least one event data worth of size. Any created from this instance will inherit this value by default. Changes to this value will not be propagate to already created receiver, but will be used by new created after the change. Also, setting this property to non-null value will set to zero. Note that setting the size too low will affect the effective performance of the Event Hub receive call.

Gets the event hub path.

The event hub path

Gets the name of the consumer group.

The name of the consumer group.

Gets or sets a value indicating whether the runtime metric of a receiver is enabled.

true if a client wants to access using . Its default value is derived from the value of

Registers an implementation of in order to start consuming events from Event Hubs for the specified starting from . Use this overload to create an event processor that checkpoints the message offset using a custom implementation of .

Partition information. Checkpoints the offset for the specified partition when is called. Implementation of . To perform more advanced creation, implement an class which allows you to control how event processors are created.

Registers an implementation of in order to start consuming events from Event Hubs for the specified starting from . Use this overload to create an event processor that checkpoints the message offset using a custom implementation of .

Partition information. Checkpoints the offset for the specified partition when is called. An object. Implementation of . To perform more advanced creation, implement an class which allows you to control how event processors are created.

Asynchronous version of .

Partition information. Checkpoints the offset for the specified partition when is called. Implementation of . A task instance that represents the asynchronous operation.

Asynchronous version of .

Partition information. Checkpoints the offset for the specified partition when is called. An object. Implementation of . Returns . To perform more advanced creation, implement an class which allows you to control how event processors are created.

Registers the object used to create an instance of in order to start consuming events for the partition specified by , starting from . Use this overload to create an event processor that checkpoints the message offset using a custom implementation of .

Partition information. Checkpoints the offset for the specified partition when is called. Factory to create an instance of . // TestEventProcessorFactory implements IEventProcessorFactory var processorFactory = new TestEventProcessorFactory(); // Register event processor with each shard to start consuming messages var subscriberGroup = receiveClient.GetDefaultConsumerGroup(); foreach (var partitionId in hubDescription.PartitionIds) { Lease lease = new Lease() { PartitionId = partitionId, Offset = EventHubTestUtils.DefaultStartingOffset }; subscriberGroup.RegisterProcessorFactory(lease, new TestCheckpointManager(), processorFactory); }

Registers the object used to create an instance of in order to start consuming events for the partition specified by , starting from . Use this overload to create an event processor that checkpoints the message offset using a custom implementation of .

Partition information. Checkpoints the offset for the specified partition when is called. Factory to create an instance of . An object. // TestEventProcessorFactory implements IEventProcessorFactory var processorFactory = new TestEventProcessorFactory(); // Register event processor with each shard to start consuming messages var subscriberGroup = receiveClient.GetDefaultConsumerGroup(); foreach (var partitionId in hubDescription.PartitionIds) { Lease lease = new Lease() { PartitionId = partitionId, Offset = EventHubTestUtils.DefaultStartingOffset }; subscriberGroup.RegisterProcessorFactory(lease, new TestCheckpointManager(), processorFactory); }

Asynchronous version of .

Partition information. Checkpoints the offset for the specified partition when is called. Factory to create an instance of . A task instance that represents the asynchronous operation. TestEventProcessorFactory processorFactory = new TestEventProcessorFactory(); // Register event processor with each shard to start consuming messages var subscriberGroup = receiveClient.GetDefaultConsumerGroup(); foreach (var partitionId in hubDescription.PartitionIds) { Lease lease = new Lease() { PartitionId = partitionId, Offset = EventHubTestUtils.DefaultStartingOffset }; await subscriberGroup.RegisterProcessorFactoryAsync(lease, new TestCheckpointManager(), processorFactory); }

Asynchronous version of .

Partition information. Checkpoints the offset for the specified partition when is called. Factory to create an instance of . An object. Returns . // TestEventProcessorFactory implements IEventProcessorFactory var processorFactory = new TestEventProcessorFactory(); // Register event processor with each shard to start consuming messages var subscriberGroup = receiveClient.GetDefaultConsumerGroup(); foreach (var partitionId in hubDescription.PartitionIds) { Lease lease = new Lease() { PartitionId = partitionId, Offset = EventHubTestUtils.DefaultStartingOffset }; subscriberGroup.RegisterProcessorFactory(lease, new TestCheckpointManager(), processorFactory); }

Unregisters for the partition specified by . This results in being called on the underlying event processor.

Partition information. Reason for which was called.

Asynchronous version of .

Partition information. Reason that was called. A task instance that represents the asynchronous operation.

Creates a new Event Hubs receiver in the specified partition, and the specified epoch value. You can use the created receiver to receive events for one Event Hubs partition, specified by .

The ID of the partition. The epoch value. The service uses this value to enforce partition/lease ownership. Options for a event hub receiver. Returns the . If the has checkpoint enabled, then the receiver will get next message from the checkpoint offset. If checkpoint is disabled, then receiver will get message from the start of the event stream, as determined by the message retention policy of the event hub. Thrown if the service encounters a transient error. Thrown if the client has a problem connecting to the service. Thrown if is not within the expected range, as determined by the property.

Creates a new Event Hubs receiver in the specified partition. You can use the created receiver to receive events for one Event Hubs partition, specified by .

The ID of the partition. Options for a event hub receiver. Returns the object that is tied to the given Event Hubs partition. Thrown if the service encounters a transient error. Thrown if the client has a problem connecting to the service. Thrown if is not within the expected range, as determined by the property. Thrown if the number of receivers currently connected to the partition specified by has exceeded the maximum allowed quota set by the service. Thrown if there is currently a receiver connected to the partition as specified by . If the has checkpoint enabled, this overload will always throw InvalidOperationException because checkpoint enabled ConsumerGroup requires epoch to work (please use the overload that supply epoch as input argument). If checkpoint is disabled, then receiver will get message from the start of the event stream, as determined by the message retention policy of the Event Hub.

Creates a new Event Hubs receiver in the specified partition, at the specified starting offset. You can use the created receiver to receive events for one Event Hubs partition, specified by .

The ID of the partition. The starting offset at which to start receiving messages. Options for a event hub receiver. Returns the . Thrown if is not within the expected range, as determined by the property. Thrown if the number of receivers currently connected to the partition specified by has exceeded the maximum allowed quota set by the service. Thrown if there is currently a receiver connected to the partition as specified by , with an specified. // the following code snippet creates a receiver that receive events // from the first partitions of the default consumer gorup. // assume we have obtained the description which will gives us the partition ids. EventHubDescription description; EventHubClient client = EventHubClient.CreateFromConnectionString(connection); var defaultGroup = client.GetDefaultConsumerGroup(); var receiver = defaultGroup.CreateReceiver( description.PartitionIds.First(), EventHubConsumerGroup.StartOfStream); var eventData = receiver.Receive();

Creates a new Event Hubs receiver in the specified partition, at the specified starting offset. You can use the created receiver to receive events for one Event Hubs partition, specified by .

The ID of the partition. The starting offset at which to start receiving messages. A Boolean value that indicates whether is treated as an inclusive offset, meaning that the first Options for a event hub receiver. event returned is the event that contains the starting offset. Normally, the first event returned is the event after the starting offset. Returns . // the following code snippet creates a receiver that receive events // from the first partitions of the default consumer group. It uses // a previously stored offset as starting offset and return that event // as the first event // assume we have obtained the description which will gives us the partition ids. // Also assume user has retrieved the stored offset EventHubDescription description; string storedOffset = "2478"; EventHubClient client = EventHubClient.CreateFromConnectionString(connection); var defaultGroup = client.GetDefaultConsumerGroup(); var receiver = defaultGroup.CreateReceiver( description.PartitionIds.First(), storedOffset); // eventData will have offset == storedOffset var eventData = receiver.Receive();

Creates a new Event Hubs receiver in the specified partition, at the specified starting offset.

The ID of the partition. The starting offset at which to start receiving messages. To specify the start of the stream, see . The epoch value. The service uses this value to enforce partition/lease ownership. Options for a event hub receiver. Returns the . Thrown if the service encounters a transient error. Thrown if the client has a problem connecting to the service. Thrown if is not within the expected range, as determined by the property.

Creates a new Event Hubs receiver in the specified partition, at the specified starting offset. You can use the created receiver to receive events for one Event Hubs partition, specified by .

The ID of the partition. The starting offset at which to start receiving messages. A Boolean value that indicates whether is treated as an inclusive offset, meaning that the first event returned is the event that contains the starting offset. Normally, the first event returned is the event after the starting offset. The epoch value. The service uses this value to enforce partition/lease ownership. Options for a event hub receiver. Returns .

Creates a new Event Hubs receiver in the specified partition, starting at the specified date and time. You can use the created receiver to receive events for one Event Hubs partition, specified by .

The ID of the partition. The starting UTC time for receiving messages. Options for a event hub receiver. Returns the . Thrown if the service encounters a transient error. Thrown if the client has a problem connecting to the service. Thrown if is not within the expected range, as determined by the property. Thrown if the number of receivers currently connected to the partition specified by has exceeded the maximum allowed quota set by the service. Thrown if there is currently a receiver connected to the partition as specified by , with an specified. Service only uses this as an approximation when determining next event to deliver. Keep in mind that there can be clock skew between client time and service time, so user application should be designed to handle duplication in event delivery.

Creates a new Event Hubs receiver in the specified partition, starting at the specified date and time. You can use the created receiver to receive events for one Event Hubs partition, specified by .

The ID of the partition. The starting UTC time for receiving messages. The epoch value. The service uses this value to enforce partition/lease ownership. Options for a event hub receiver. Returns the . Thrown if the service encounters a transient error. Thrown if the client has a problem connecting to the service. Thrown if is not within the expected range, as determined by the property. Service only uses this as an approximation when determining next event to deliver. Keep in mind that there can be clock skew between client time and service time, so user application should be designed to handle duplication in event delivery.

Creates a new Event Hubs receiver in the specified partition, at the specified starting position. You can use the created receiver to receive events for one Event Hubs partition, specified by .

The ID of the partition. The starting at which to start receiving messages. The epoch value. If set, the service uses this value to enforce partition/lease ownership. Options for a event hub receiver. Returns .

Asynchronous version of .

The ID of the partition. The epoch value. The service uses this value to enforce partition/lease ownership. Options for a event hub receiver. Returns . If the has checkpoint enabled, then the receiver will get next message from the checkpoint offset. If checkpoint is disabled, then receiver will get message from the start of the event stream, as determined by the message retention policy of the Event Hub.

Asynchronous version of .

The ID of the partition. Options for a event hub receiver. Returns . If the has checkpoint enabled, this overload will always throw InvalidOperationException because checkpoint enabled ConsumerGroup requires epoch to work (please use the overload that supply epoch as input argument). If checkpoint is disabled, then receiver will get message from the start of the event stream, as determined by the message retention policy of the Event Hub.

Asynchronous version of .

The ID of the partition. The starting offset at which to start receiving messages. Options for a event hub receiver. Returns .

Asynchronous version of .

The ID of the partition. The starting offset at which to start receiving messages. A Boolean value that indicates whether is treated as an inclusive offset, meaning that the first event returned is the event that contains the starting offset. Normally, the first event returned is the event after the starting offset. Options for a event hub receiver. Returns . // The following code snippet creates a receiver that receive events // from the first partitions of the default consumer group. It uses // a previously stored offset as starting offset and return that event // as the first event // assume we have obtained the description which will gives us the partition ids. // Also assume user has retrieved the stored offset EventHubDescription description; string storedOffset = "2478"; EventHubClient client = EventHubClient.CreateFromConnectionString(connection); var defaultGroup = client.GetDefaultConsumerGroup(); var receiver = defaultGroup.CreateReceiver( description.PartitionIds.First(), storedOffset); // eventData will have offset == storedOffset var eventData = receiver.Receive();

Asynchronous version of .

The ID of the partition. The starting UTC time for receiving messages. Options for a event hub receiver. Returns . Service only use this as an approximation when determining next event to deliver. Keep in mind that there can be clock skew between client time and service time, so user application should be designed to handle duplication in event delivery.

Asynchronous version of .

The ID of the partition. The starting offset at which to start receiving messages. To specify the start of the stream, see . Options for a event hub receiver. The epoch value. The service uses this value to enforce partition/lease ownership. Returns .

Asynchronous version of .

The ID of the partition. The starting offset at which to start receiving messages. A Boolean value that indicates whether is treated as an inclusive offset, meaning that the first event returned is the event that contains the starting offset. Normally, the first event returned is the event after the starting offset. The epoch value. The service uses this value to enforce partition/lease ownership. Options for a event hub receiver. Returns .

Asynchronous version of .

The ID of the partition. The starting UTC time for receiving messages. The epoch value. The service uses this value to enforce partition/lease ownership. Options for a event hub receiver. Returns . Service only uses this as an approximation when determining next event to deliver. Keep in mind that there can be clock skew between client time and service time, so user application should be designed to handle duplication in event delivery.

Asynchronous version of .

The ID of the partition. The starting at which to start receiving messages. The epoch value. The service uses this value to enforce partition/lease ownership. Options for a event hub receiver. Returns .

Provides methods for event processors. Applications must implement this interface, which enables the handling of events from Event Hubs. This interface is the main extensibility point for the EventProcessorHost and .

Initializes the Event Hub processor instance. This method is called before any event data is passed to this processor instance.

Ownership information for the partition on which this processor instance works. Any attempt to call will fail during the Open operation. The task that indicates that the Open operation is complete.

Asynchronously processes the specified context and messages. This method is called when there are new messages in the Event Hubs stream. Make sure to checkpoint only when you are finished processing all the events in each batch.

Ownership information for the partition on which this processor instance works. A batch of Event Hubs events. The task that indicates that is complete.

Called when the ownership of partition moves to a different node for load-balancing purpose, or when the host is shutting down. Called in response to .

Partition ownership information for the partition on which this processor instance works. You can call to checkpoint progress in the processing of messages from Event Hub streams. The reason for calling . A task indicating that the Close operation is complete.

An interface that provides a factory for creating instances of .

Use a factory if you need a more advance way to create . Otherwise you can use EventHubConsumerGroup.RegisterProcessor to specify just the event processor type.

Creates a new instance of an event processor in the specified partition.

Partition context information. An instance of .

Represents an interface for the asynchronous handler for the message session.

Raises an event that occurs when a message has been brokered.

The message session. The brokered message. The task object representing the asynchronous operation.

Raises an event that occurs when the session has been asynchronously closed.

The closed session. The task object representing the asynchronous operation.

Raises an event that occurs when the session has been lost.

The exception that occurred that caused the lost session. The task object representing the asynchronous operation.

Represents an interface for the handler factory associated with the message session.

Creates an instance of the handler factory.

The message session. The message. The created instance.

Releases the resources associated with the handler factory instance.

The handler instance.

Represents an interface for the handler associated with the message session.

Raises an event that occurs when a message has been brokered.

The current message session. The brokered message.

Raises an event that occurs when an active session closes.

The closing session.

Raises an event that occurs when the session has been lost.

The error that caused the lost session.

Represents an interface for the handler factory associated with the message session.

Creates an instance of the handler factory.

The message session. The message. The created instance.

Releases the resources associated with the handler factory instance.

The handler instance.

Represents the event sent and received from an Event Hubs stream. It contains the body of the event, a user-defined property bag, and various metadata describing the event, such as its offset in the partition and its number in the stream sequence. Partitions are filled with a sequence of event data.

Initializes a new instance of the class.

Initializes a new instance of the class that uses the argument stream as the body stream.

A stream which is used as the body stream. User is expected to own the disposing of the stream when using this constructor.

Initializes a new instance of the class that uses the specified byte array as the body.

The event data byte array which is used to form the body stream. You should treat the input byte array as immutable when sending EventData. When sending the data as well as any cloning operation, Service Bus will access the byte array by reference rather that by deep copy of the byte array. Also disposing the EventData instance will only de-reference the association with the array. The user is responsible for the lifecycle of the byte-array itself.

Initializes a new instance of the class that uses the specified list of byte array segments as the body.

An IList of array segments to be sent as the body of the . Typically user will use IList<ArraySegment<byte>> when using there own buffer pool for scenarios that require efficient usage of memory. When sending the data as well as any cloning operation, Service Bus will access the array segments by reference rather that by deep copy of the bytes. Disposing the EventData instance will only de-reference the association with the list. User is responsible for the life cycle of the array segments themselves.

Constructor which takes the input content and serializer to create the body stream.

.Net object the serializer used to serialize If content is a stream and seriazlier is null, then it is equate to use

This constructor is only used in the receive path from Amqp path, or in Cloning from a EventData that has serialized.

This constructor is only used on the Gateway http path so that we can clean up the stream.

Gets the offset of the data relative to the Event Hub partition stream. The offset is a marker or identifier for an event within the Event Hubs stream. The identifier is unique within a partition of the Event Hubs stream.

The read offset of the event data.

Gets or sets the key that is used to determine to which partition to send event data.

A partition key for the partition to which event data should be sent.

Gets the logical sequence number of the event within the partition stream of the Event Hub.

The logical sequence number of the event.

Gets or sets the date and time of the sent time in UTC.

The enqueue time in UTC. This value represents the actual time of enqueuing the event data.

Gets the user properties of the event data that the user explicitly added during send operations.

The user properties of the event data.

Gets or sets the system properties, including the event data.

The system properties, including the event data.

Gets or sets the deliveryTag which is used for server side checkpointing.

Makes a deep copy of this event data.

A copy of this event data.

Performs application-defined tasks associated with freeing, releasing, or resetting unmanaged resources.

Gets or sets the underlying stream to the event data body.

The underlying stream to the event data body. This method can only be called once and afterwards method will throw .

Gets the event data bytes.

The event data bytes.

Represents the asynchronous handler associated with the message session.

Represents an event that occurs when the session has a brokered message.

The message session. The brokered message. The task object representing the asynchronous operation.

Raises an event that occurs when the session has been asynchronously closed.

The closed session. The task object representing the asynchronous operation.

Raises an event that occurs when the session has been lost.

The exception occurred that caused the lost session. The task object representing the asynchronous operation.

Represents an event that occurs when the session has a brokered message.

The message session. The brokered message. The task object representing the asynchronous operation.

Raises an event that occurs when the session has been asynchronously closed.

The closed session. The task object representing the asynchronous operation.

Raises an event that occurs when the session has been lost.

The exception occurred that caused the lost session. The task object representing the asynchronous operation.

Represents the handler associated with the message session.

Represents an event that occurs when the session has a brokered message.

The message session. The brokered message.

Raises an event that occurs when the session has been closed.

The closed session.

Raises an event that occurs when the session has been lost.

The exception occurred that caused the lost session.

Represents an event that occurs when the session has a brokered message.

The message session. The brokered message.

Raises an event that occurs when the session has been closed.

The closed session.

Raises an event that occurs when the session has been lost.

The exception occurred that caused the lost session.

Represents an exception occurred when the size of the message exceeded the maximum allowed size.

Initializes a new instance of the class with specified exception message.

The message associated with the exception.

Initializes a new instance of the class with specified exception message and the error that caused the exception.

The message associated with the exception. The error that caused the current exception.

Represents the available options for the shard message.

Initializes a new instance of the class.

Occurs when an exception was received.

Gets or sets the maximum number of the maximum concurrent calls.

The maximum number of the maximum concurrent calls.

Gets or sets the duration of the auto checkpoint.

The duration of the auto checkpoint.

Represents the exception occurred for the paired messaging factory.

Initializes a new instance of the class.

The exception message.

Encapsulates information related to an Event Hubs partition used by .

This is mainly created for unit testing IEventProcessor logic so various mocking frameworks can be used to pass in a mock for PartitionContext.

Gets or sets the path of the event hub.

The path of the event hub.

Gets or sets the name of the consumer group.

The name of the consumer group.

Gets or sets the messaging lease.

The messaging lease.

Gets the approximate receiver runtime information for a logical partition of an Event Hub. To enable the setting, refer to

Checkpoints progress of an Event Hubs message stream. Make sure to call this method once all the messages in a batch are processed.

The task representing the asynchronous operation.

Checkpoints progress of an Event Hubs message stream with the specified offset.

An object to use for checkpointing the state of the stream. Returns .

This provides a message pump and manages the life-cycle of .

Represents the approximate runtime information for a logical partition of an Event Hub.

Gets the path of the event hub.

The path of the event hub.

Gets the partition ID for a logical partition of an Event Hub.

The partition identifier.

Gets if the partition is emtpy or not.

Boolean indicating if partition is empty.

Gets the begin sequence number.

The begin sequence number.

Gets the end sequence number.

The end sequence number.

Gets the offset of the last enqueued event.

The offset of the last enqueued event.

Gets the enqueued UTC time of the last event.

The enqueued time of the last event.

Exception for signaling revoked publisher errors.

Constructor.

Detail about the cause of the exception. The TrackingContext.

Constructor.

Detail about the cause of the exception. The TrackingContext. The inner exception.

Constructor.

Information Context

Exception for signaling receive request quota exceeded errors.

Constructor.

The exception message included with the base exception.

Exception Constructor.

The exception message included with the base exception. The inner exception.

Constructor.

Detail about the cause of the exception. The TrackingContext.

Constructor.

Detail about the cause of the exception. The TrackingContext. The inner exception.

Exception Constructor for additional details embedded in a serializable stream.

The serialization information object. The streaming context/source.

Gets the name of the collection.

The name of the collection.

ContinuationToken for Querying NextPage to enumerate ChildEntities under EventHub

Enumerates the status of the entity availability.

The entity is unknown.

The entity is available.

The entity is limited.

The entity is being restored.

The entity is being renamed.

This purely is for Sbmp code path to know which protocol to use, and thus there is no AutoDetect "mode" per say.

Gets or sets a value indicating whether the message came from cache or not.

true if came from cache, false if not.

After BeginTryReceive completes use this method to perform the EndTryReceive

The AsyncResult True if another TryReceive is needed, False if we're all done receiving (shutting down).

Represents the exceptions occurred during the sending the availability for the messaging.

Initializes a new instance of the class.

The error that caused the exception.

Represents the options for the session handler.

Initializes a new instance of the class.

Occurs when an exception was received during session handling.

Gets or sets the time needed before the message waiting expires.

The time needed before the message waiting expires.

Gets or sets the maximum number of existing sessions.

The maximum number of existing sessions.

Gets or sets whether the autocomplete option of the session handler is enabled.

true if the autocomplete option of the session handler is enabled; otherwise, false.

Gets or sets the time needed before the session renew its state.

The time needed before the session renew its state.

If true, the entity can be accessed by anonymous users

Provides data for the event.

Initializes a new instance of the class.

The exception that this event data belongs to. The action associated with the event.

Gets the parent class exception to which this event data belongs.

The exception, generated by the parent class, to which this event data belongs.

Gets the action associated with the event.

The action associated with the event.

Provides options associated with message pump processing using and .

Initializes a new instance of the class.

Gets or sets the maximum number of concurrent calls to the callback the message pump should initiate.

The maximum number of concurrent calls to the callback.

Gets or sets a value that indicates whether the message-pump should call or on messages after the callback has completed processing.

true to complete the message processing automatically on successful execution of the operation; otherwise, false.

Gets or sets the maximum duration within which the lock will be renewed automatically. This value should be greater than the longest message lock duration; for example, the LockDuration Property.

The maximum duration during which locks are automatically renewed. The default value is 5 minutes, and if you set this value to the lock will not be automatically renewed.

Occurs when an exception is received. Enables you to be notified of any errors encountered by the message pump. When errors are received calls will automatically be retried, so this is informational.

Represents the event arguments associated with paired namespace for the service bus messaging.

Gets or sets the options associated the paired namespace.

The options associated the paired namespace.

Represents the exception occurred during the sending of availability backlogs.

Initializes a new instance of the class.

The message associated with the exception.

Represents the options for the paired namespace for the service bus messaging.

Initializes a new instance of the class.

The secondary namespace manager. The secondary messaging factory associated with the paired namespace.

Initializes a new instance of the class.

The secondary namespace manager. The secondary messaging factory associated with the paired namespace. The message interval failover.

Gets the object that manages entities, such as queues, topics, subscriptions and rules in the paired namespace.

The object that manages entities, such as queues, topics, subscriptions and rules in the paired namespace.

Gets the secondary messaging factory associated with the paired namespace.

The secondary messaging factory associated with the paired namespace.

Gets the message interval failover.

The message interval failover.

Dissolves the pairing of the paired namespace.

Notifies the primary messaging on sending the result.

The string of the path. true if the results successfully send; otherwise, false.

Represents the options for the sending the availability of paired namespace.

Initializes a new instance of the class.

The secondary namespace manager. The messaging factory.

Initializes a new instance of the class.

The secondary namespace manager. The messaging factory. The number of backlog queue.

Initializes a new instance of the class.

The secondary namespace manager. The messaging factory. The number of backlog queue. The fail over interval. true to enable syphon; otherwise, false.

Gets or sets the number of backlog queues.

The number of backlog queues.

Gets or sets whether the syphon is enabled for this instance.

true if the syphon is enabled for this instance; otherwise, false.

Gets or sets the interval of pings.

The interval of pings.

Marks a path as healthy.

The path to be marked.

Defines the authorization rule for shared access operation.

This is done to help json and other deserializers

Initializes a new instance of the class.

The authorization rule key name. The list of rights.

Initializes a new instance of the class.

The authorization rule key name. The primary key for the authorization rule. The list of rights.

Initializes a new instance of the class.

The authorization rule key name. The primary key for the authorization rule. The secondary key for the authorization rule. The list of rights.

A serializer for objects of type SharedAccessAuthorizationRule.

Checks the validity of the authorization rule.

Gets or sets the authorization rule key name.

The authorization rule key name.

Gets or sets the primary key for the authorization rule.

The primary key for the authorization rule.

Gets or sets the secondary key for the authorization rule.

The secondary key for the authorization rule.

Checks the validity of the specified access rights.

The access rights to check.

Returns the hash code for this instance.

The hash code for this instance.

Determines whether the specified object is equal to the current object.

The object to compare with the current object. true if the specified object is equal to the current object; otherwise, false.

Distinguishes system rules from non system rules. System rules are not visible to customer and their key names contain reserved characters.

If the rule is a System rule then set to true else set to false.

Generates the random key for the authorization rule.

The random key for the authorization rule.

Checks the validity of the specified access rights.

A randomly generated System key.

MessageBrowser class is used to peek messages from the message container.

Ends the message Peek operation.

An that references the Complete.

Ends the message Peek operation.

An that references the Complete.

Executes the begin Peek queue action.

The PeekOptions to use. The timeout. The callback. The state. .

Executes the end Peek action.

The result. List of messages to peek.

Gets a top message.

The messages. The top message.

Amqp transport settings element.

TODO: make this public when we support AMQP

Default constructor.

Gets or sets the batch flush interval.

The batch flush interval.

Represents a configuration element that contains sub-elements that specify settings for using the binding.

Initializes a new instance of the class.

Gets the binding collection element.

The binding collection element.

Represents an XML element that specifies a configuration of .

The NetMessagingBinding and NetMessagingTransportBindingElement allow WCF clients to easily send and receive messages to ServiceBus Messaging Entities (queues, topics, and subscriptions). These message exchanges will use standard WCF programming model such as IOutputChannel, IInputChannel, IInputSessionChannel, and ReceiveContext. The NetMessagingTransportBindingElement supports creating IOutputChannel, IInputChannel, IInputChannel+ReceiveContext, IInputSessionChannel, and IInputSessionChannel+ReceiveContext. The sessionful channels (IInputSessionChannel, IInputSessionChannel+ReceiveContext) are for Session/Conversation support.

Initializes a new instance of the class.

Initializes a new instance of the class using the specified name.

The name.

Gets or sets the number of prefetch.

The number of prefetch. Takes effect on the next receive call to the server

Gets or sets the SessionIdleTimeout.

If an IInputSessionChannel.TryReceive operation doesn’t receive any message within this TimeSpan then the channel will indicate end of session.

Gets or sets the transport settings element for the net messaging.

The transport settings element for the net messaging.

Gets the type of binding element being used.

The type of binding element being used.

Gets a instance that contains a collection of objects that can be attributes or objects of this configuration element.

The properties. ### A instance that contains a collection of objects that can be attributes or objects of this configuration element.

Called when the content of a specified binding element is applied to this binding configuration element.

A binding.

Initializes this binding configuration element with the content of the specified binding.

A binding. ### is null. ### The type of this binding element is different from the type specified by .

Represents the transport settings element for the net messaging.

Initializes a new instance of the class.

Gets or sets the batch flush interval.

The that represents the batch flush interval.

Gets or set a value that indicates whether redirection is enabled.

true if redirection is enabled; otherwise, false.

Represents the net messaging transport extension element.

Initializes a new instance of the class.

Gets the type of binding element being used.

The type of binding element being used.

Gets or sets the number of prefetch.

The number of prefetch. Takes effect on the next receive call to the server

Gets or sets the SessionIdleTimeout.

If an IInputSessionChannel.TryReceive operation doesn’t receive any message within this TimeSpan then the channel will indicate end of session.

Gets or sets the transport settings element for the net messaging.

The transport settings element for the net messaging.

Gets the configuration property.

Applies the settings of the specified to this configuration element.

The to this configuration element.

Copies the settings from the specified configuration element to this configuration element.

The configuration element whose settings are to be copied to this configuration element.

Returns a custom binding element object with default values.

A custom object with default values.

Initializes this binding configuration element with the content of the specified binding element.

A binding element.

Exception for signaling message duplicate errors.

Initializes a new instance of the class.

The error message about the exception.

Initializes a new instance of the class.

The error message about the exception. The inner exception that is the cause of the current exception.

Constructor.

Detail about the cause of the exception. The TrackingContext.

Constructor.

Detail about the cause of the exception. The TrackingContext. The inner exception.

Constructor.

The information. The context.

Specifies the possible access rights for a user.

The access right is Manage.

The access right is Send.

The access right is Listen.

Summary Canonical example of MPLEX automaton

This is the Buffer for UTF8 files. It attempts to read the encoding preamble, which for this encoding should be unicode point \uFEFF which is encoded as EF BB BF

TextBuff factory. Reads the file preamble and returns a TextBuff, LittleEndTextBuff or BigEndTextBuff according to the result.

The underlying stream

Returns the string from the buffer between the given file positions. This needs to be done carefully, as the number of characters is, in general, not equal to (end - beg).

Begin filepos End filepos

This is the Buffer for Big-endian UTF16 files.

This is the Buffer for Little-endian UTF16 files.

Summary Canonical example of MPLEX automaton

This is the Buffer for UTF8 files. It attempts to read the encoding preamble, which for this encoding should be unicode point \uFEFF which is encoded as EF BB BF

TextBuff factory. Reads the file preamble and returns a TextBuff, LittleEndTextBuff or BigEndTextBuff according to the result.

The underlying stream

Returns the string from the buffer between the given file positions. This needs to be done carefully, as the number of characters is, in general, not equal to (end - beg).

Begin filepos End filepos

This is the Buffer for Big-endian UTF16 files.

This is the Buffer for Little-endian UTF16 files.

Specifies an enumeration of AllowRuleClaim type.

The type is Upn.

The type is Role.

Represents the rule to allow.

Initializes a new instance of the class.

Initializes a new instance of class.

The name of the claim issuer. The type of the claim. The value of the claim. The list of possible .

Initializes a new instance of the class with the specified parameters.

The name of the claim issuer. The type of the claim. The value of the claim. The list of possible .

Gets or sets the allow rule key name.

The allow rule key name.

Defines the Azure Service Bus authorization rule that is used to determine whether an operation is permissible or not.

The name identifier claim rule.

The short name identifier claim rule.

The UPN claim rule.

The short UPN claim rule.

The role role claim rule.

The role role claim rule.

The shared access key claim rule.

Gets or sets the name identifier of the issuer.

The name identifier of the issuer.

Gets or sets the claim type.

The claim type.

Gets or sets the claim value which is either ‘Send’, ‘Listen’, or ‘Manage’.

The claim value which is either ‘Send’, ‘Listen’, or ‘Manage’.

Gets or sets the list of rights.

The list of rights.

Gets or sets the authorization rule key name.

The authorization rule key name.

Gets or sets the date and time when the authorization rule was created.

The date and time when the authorization rule was created.

Gets or sets the date and time when the authorization rule was modified.

The date and time when the authorization rule was modified.

Gets or sets the modification revision number.

The modification revision number.

Enables derived classes to provide custom handling when validating the authorization rule.

Checks the validity of the specified access rights.

The access rights to check.

Returns the hash code for this instance.

The hash code for this instance.

Creates a copy of .

A created copy of .

Determines whether the specified object is equal to the current object.

The object to compare with the current object. true if the specified object is equal to the current object; otherwise, false.

Represents a collection of .

Specifies the serializer for serializing and deserializing the object.

Specifies the inner collection.

Initializes a new instance of the class.

Initializes a new instance of the class with a list of .

The list of .

Gets the enumerator that iterates through the collection.

The enumerator that can be used to iterate through the collection.

Gets the enumerator that iterates through the collection.

The enumerator that can be used to iterate through the collection.

Adds the specified into the collection.

The to be added.

Clears all elements in the collection.

Determines whether the specified item exists in the collection.

The item to search in the collection. true if the specified item is found; otherwise, false.

Copies the elements into an array starting at the specified array index.

The array to hold the copied elements. The zero-based index at which copying starts.

Removes the specified from the collection.

The item to remove. true if the operation succeeded; otherwise, false.

Gets or sets the number of contained in the collection.

The number of contained in the collection.

Gets the sets of .

The authorization rule to match the specified value. The sets of that match the specified value.

Gets the rule associated with the specified key.

The name of the key. The rule associated with the specified key. true if the contains an element with the specified key; otherwise, false.

Gets the set of that matches the specified value.

The value to search for. The sets of that match the specified value.

Gets or sets whether the is read only.

true if the is read only; otherwise, false.

Determines whether the specified has equal runtime behavior as this current object.

The to compare to the current object. true if the they are the equal runtime behavior; otherwise, false.

Gets a value that indicates whether the requires encryption.

true if the requires encryption; otherwise, false.

The exception that is thrown when subscription matching resulted no match.

Initializes a new instance of the class with error message.

The error message about the exception.

Initializes a new instance of the class with error message and inner exception.

The error message about the exception. The inner exception that is the cause of the current exception.

Returns the string representation of the .

The string representation of the .

Represents a relay description.

Initializes a new instance of the class.

The path of the relay. The relay type.

Gets or sets the path of the relay.

The path of the relay.

Gets or sets the exact time the relay was created.

The exact time the relay was created.

Gets or sets the date when the relay was updated.

The date when the relay was updated.

Gets or sets the relay type.

The relay type.

Gets or sets the number of listeners for this relay.

The number of listeners for this relay.

Gets or sets whether client authorization is needed for this relay.

true if client authorization is needed for this relay; otherwise, false.

Gets or sets whether transport security is needed for this relay.

true if transport security is needed for this relay; otherwise, false.

Gets the .

The .

Gets or sets whether the relay is dynamic.

true if the relay is dynamic; otherwise, false.

Gets or sets the user metadata associated with this instance.

The user metadata associated with this instance.

Gets or sets the name of the collection associated with the relay.

The name of the collection associated with the relay.

This is so users with Send or Listen tokens can still call GetRelay[s], just not read everything, especially the AuthorizationRules and any other members which require the Manage permission.

Represents an exception when the transaction size exceeds.

Initializes a new instance of the class.

The exception message.

Initializes a new instance of the class.

The exception message. The error that caused the exception.

Constructor.

Detail about the cause of the exception. The TrackingContext.

Constructor.

Detail about the cause of the exception. The TrackingContext. The inner exception.

Exception Constructor for additional details embedded in a serializable stream.

The serialization information object. The streaming context/source.

Enumerates types of messaging tile.

A TileSquareImage type.

A TileWideImage type.

A TileWideImageAndText type.

A TileWideImageCollection type.

A TileWideText01 type.

A TileWideText02 type.

A TileWideText03 type.

A TileWideText04 type.

A TileWideText05 type.

A TileWideText06 type.

A TileWideText07 type.

A TileWideText08 type.

A TileWideText09 type.

A TileWideSmallImageAndText01 type.

A TileWideSmallImageAndText02 type.

A TileWideSmallImageAndText03 type.

A TileWideSmallImageAndText04 type.

A TileWidePeekImageAndText type.

A TileWidePeekImage01 type.

A TileWidePeekImage02 type.

A TileWidePeekImage03 type.

A TileWidePeekImage04 type.

A TileWidePeekImage05 type.

A TileWidePeekImage06 type.

A TileWidePeekImageCollection01 type.

A TileWidePeekImageCollection02 type.

A TileWidePeekImageCollection03 type.

A TileWidePeekImageCollection04 type.

A TileWidePeekImageCollection05 type.

A TileWidePeekImageCollection06 type.

A TileWideBlockAndText01 type.

Enumerates the types of image and text for toast notification.

Specifies the first type image and text.

Specifies the second type image and text.

Specifies the third type image and text.

Specifies the fourth type image and text.

Specifies the first type small image and text.

Specifies the second type small image and text.

Specifies the third type small image and text.

Specifies the fourth type small image and text.

Specifies the first type text.

Specifies the second type text.

Specifies the third type text.

Specifies the fourth type text.

An enumeration that sets the messaging protocol to either NetMessaging (a proprietary protocol to Azure Service Bus) or AMQP (an industry standard).

Although NetMessaging is the default value, AMQP is the preferred protocol. No matter which transport type you select (NetMessaging or AMQP), the communication occurs over the selected . For example, you can have AMQP occur over TCP or HTTP(S).

The network messaging transport type.

The Advanced Message Queuing Protocol (AMQP) transport type.

Enumerates the possible values for the status of a messaging entity.

The status of the messaging entity is active.

The status of the messaging entity is disabled.

Resuming the previous status of the messaging entity.

The sending status of the messaging entity is disabled.

The receiving status of the messaging entity is disabled.

Indicates that the resource is still being created. Any creation attempt on the same resource path will result in a exception (HttpCode.Conflict 409).

Indicates that the system is still attempting cleanup of the entity. Any additional deletion call will be allowed (the system will be notified). Any additional creation call on the same resource path will result in a exception (HttpCode.Conflict 409).

The messaging entity is being renamed.

The status of the messaging entity is unknown.

Exception for signaling messaging entity disabled errors.

Initializes a new instance of the class.

The name of the entity responsible for the exception.

Initializes a new instance of the class.

The error message about the exception. The inner exception that is the cause of the current exception.

Constructor.

Detail about the cause of the exception. The TrackingContext.

Constructor.

Detail about the cause of the exception. The TrackingContext. The inner exception.

Constructor.

The information. The context.

Provides the details of the messaging exception.

Enumerates the types of error level for the messaging communication.

Gets the error code.

The error code.

Gets the descriptive message about the exception.

The descriptive message about the exception.

Gets the error level.

One of the values of the enumeration.

Returns the exception details for the unknown detail error.

A descriptive message about the exception. The exception details for the unknown detail error.

Returns the exception details for the entity gone error.

A descriptive message about the exception. The exception details for the entity gone error.

Returns the exception details for the entity not found error.

A descriptive message about the exception. The exception details for the entity not found error.

Returns the exception details for the entity conflict error.

A descriptive message about the exception. The exception details for the entity conflict error.

Returns the exception details when an Event Hubs publisher has been revoked.

A descriptive message about the exception. Returns .

Returns the exception details for the server busy error.

A descriptive message about the exception. The exception details for the server busy error.

Returns the exception details for the store lock lost error.

A descriptive message about the exception. The exception details for the store lock lost error.

Returns the exception details for the unspecified internal error.

A descriptive message about the exception. The exception details for the unspecified internal error.

Returns the exception details for the SQL filters exceeded error.

A descriptive message about the exception. The exception details for the SQL filters exceeded error.

Returns the exception details for the correlation filters exceeded error.

A descriptive message about the exception. The exception details for the correlation filters exceeded error.

Returns the exception details for the subscriptions exceeded error.

A descriptive message about the exception. The exception details for the subscriptions exceeded error.

Returns the exception details when an Event Hub is at full capacity.

A descriptive message about the exception. Returns .

Returns the exception details for the entity update conflict error.

The name of the entity. The exception details for the entity update conflict error.

Returns the exception details for an entity conflict in progress error. This can occur if there is already a conflicting create or delete call pending on the entity in question.

The name of the messaging entity. Returns .

Returns the exception details for an managment operation conflict in progress error.

The message of the operation. Returns .

This aborts all entities within the managing collection.

This method create a snapshot of the collection instead of doing in-place aborts.

This starts a closing of all entities within the collection.

This create a snapshot of the collection before closing rather than doing in-place close of the entities.

The exception that is thrown to signal messaging communication errors.

Initializes a new instance of the class.

The communication path.

Initializes a new instance of the class.

The error message that explains the reason for the exception. The inner exception that is the cause of the current exception.

Constructor.

The information. The context.

Represents the binding that is used for net messaging.

Initializes a new instance of the class.

Initializes a new instance of the class.

The configuration to use for the initialization.

Gets or sets the transport settings for the net messaging.

The transport settings for the net messaging.

Gets or sets the maximum size allowed for a buffer pool that stores TCP messages processed by the binding.

The maximum size allowed for a buffer pool that stores TCP messages processed by the binding.

Gets the URI transport scheme for the channels and listeners that are configured with this binding.

The URI transport scheme for the channels and listeners that are configured with this binding.

Gets or sets the timespan value that specifies period of inactivity that the session waits before timing out.

The timespan value that specifies period of inactivity that the session waits before timing out.

Gets or sets the number of messages that the message receiver can fetch in advance.

The number of messages that the message receiver can fetch in advance. Takes effect on the next receive call to the server.

Returns an ordered collection of binding elements contained in the current binding.

The object which contains the ordered stack of binding elements described by the . The order of the binding elements starting from the bottom is transport, encoding, and security.

Try create.

The elements. [out] The binding. true if it succeeds, false if it fails.

Initializes from.

The binary encoding. The service bus transport.

Query if 'binaryEncoding' is binding elements match.

The binary encoding. The service bus transport. true if binding elements match, false if not.

Query if 'a' is transport match.

a. The. true if transport match, false if not.

Query if 'a' is encoding match.

a. The. true if encoding match, false if not.

Query if 'a' is message version match.

Thrown when argument null. Thrown when as error. a. The. true if message version match, false if not.

Applies the configuration described by configurationName.

Thrown when as error. Name of the configuration.

Represents the binding element used to specify a net messaging transport for transmitting messages on the Service Bus.

The NetMessagingTransportBindingElement supports creating IOutputChannel, IInputChannel, IInputChannel+ReceiveContext, IInputSessionChannel, and IInputSessionChannel+ReceiveContext. The session-aware channels (IInputSessionChannel, IInputSessionChannel+ReceiveContext) are for session support.

Initializes a new instance of the class.

NetMessagingTransportBindingElement copy constructor.

The source class.

Gets or sets the number of prefetch.

The number of prefetch. Takes effect on the next receive call to the server

Gets the URI scheme for the transport.

The URI scheme for the transport.

Gets or sets the timespan value that specifies period of inactivity that the session waits before timing out.

The timespan value. The default value is 1 minute.

Gets or sets the transport settings for the net messaging.

The transport settings for the net messaging.

Builds a channel factory.

Type of the channel. The binding context. The interface implemented by the channel factory. Thrown when TChannel isn't a supported channel type Thrown when context is null.

Builds a channel listener.

Thrown when context is null. Type of the channel. The binding context. A implemented IChannelListener interface. Channel listeners and their associated channels are generally used by services that receive communications initiated by clients. Channel factories that implement the IChannelFactory interface, by contrast, provide the mechanisms used to create the channels through which communication with a service is initiated. Thrown when TChannel isn't a supported channel type

Queries the channel factory can build 'context'.

Type of the channel. The binding context. Returns a value that indicates whether the binding element can build a channel factory for a specific type of channel. Thrown when argument null.

Queries if we can build channel listener 'context'.

Generic type parameter. The binding context. Returns a value that indicates whether the binding element can build a channel listener for a specific type of channel. Thrown when argument null.

Makes a deep copy of this binding element.

A copy of this binding element.

Gets a specific binding element property.

Generic type parameter. The binding context. The property T Thrown when argument null.

Exports a custom policy assertion about this binding.

The MetadataExporter that you can use to modify the exporting process. The PolicyConversionContext that you can use to insert your custom policy assertion.

Default constructor.

Gets or sets a value that specifies if receive context is enabled.

true if enabled, false if not. ### true if receive context is enabled; otherwise false.

Gets a value that specifies a connection timeout when used with direct channels and message lock duration when used with queued channels.

The validity duration. A timeout value.

Represents .NET messaging transport settings.

This class provides Net Messaging Protocol (SBMP) specific configuration support for the NetMessagingBinding.MessagingFactorySettings property. It exposes to configuration the settings available on the MessagingFactorySettings. // Create settings for the MessagingFactory (for runtime operations) MessagingFactorySettings factorySettings = new MessagingFactorySettings() { NetMessagingTransportSettings = new NetMessagingTransportSettings(), Credential = TransportClientCredentialBase.CreateSharedSecretCredential(IssuerName, IssuerKey), }; // Create the MessagingFactory MessagingFactory factory = MessagingFactory.Create(myServiceBusNamespace, factorySettings); // Create queue client

Initializes a new instance of the class.

Gets or sets the batch flush interval.

The batch flush interval.

Gets a value that indicates whether the message redirect is enabled.

true if the message redirect is enabled; otherwise, false.

Gets or sets the lease timeout value for the LeaseTimeout property within the class. Default is 5 minutes.

throw if value is less than TimeSpan.Zero or larger than Int32.MaxValue milliseconds

Gets or sets a value indicating whether this object use ssl stream security.

true if use ssl stream security, false if not.

Gets or sets a value indicating whether the transport port number is to be preserved and not overridden with gateway port.

true if the client is at the gateway, false if not.

Gets or sets a value indicating whether to enable client to server ping message.

true if the ping should be enabled, false if not.

Gets or sets a value indicating the client authentication thumbprint that the server trusts.

set if client auth is enabled. null if not.

The endpoint identity of the server/servers. Override in case servers are anything other than server name

Makes a deep copy of this object.

A copy of this object.

Bitfield of flags for specifying AuthenticationModes.

.

.

.

Represents the description of an entity.

Gets or sets a value that indicates whether the entity description is read-only.

true if the entity description is read-only; otherwise, false.

Gets or sets the structure that contains extra data.

An that contains data that is not recognized as belonging to the data contract.

Throws an exception if the entity description is read-only.

Given a path, the method will attempt to return the last sub-queue segment of the path and the path itself. The idea is to find "/$" as the indication of the subQueue segment.

new string[2] array where string[0] is always the path, and string[1] is the subQueueName.

Represents the property bag for a .

The name used for applying the property bag to a when sending a message.

Initializes a new instance of the class.

Gets the brokered message.

The brokered message object.

Gets or sets the type of the content.

The type of the content of the message body. This is a content type identifier utilized by the sender and receiver for application specific logic. If the message is in disposed state.

Gets or sets the identifier of the correlation.

The correlation identifier. If the message is in disposed state.

Gets the number of deliveries that have been made to deliver this message.

The number of deliveries that have been made to deliver this message. If the message is in disposed state. If the message has not been delivered by ServiceBus.

Gets the date and time in UTC at which the message is set to expire.

The message expiration time in UTC. If the message is in disposed state.

Gets or sets the identifier of the session.

The identifier of the session. If the message is in disposed state.

Gets or sets the application specific label.

The application specific label. If the message is in disposed state.

Gets the date and time in UTC until which the message will be locked in the queue/subscription.

The date and time until which the message will be locked in the queue/subscription. If the message is in disposed state. If the message was not received from the ServiceBus.

Gets the lock token assigned by Service Bus to the message.

The lock token assigned by Service Bus to the message. If the message is in disposed state. If the message was not received from the ServiceBus.

Gets or sets the identifier of the message.

The message identifier. If the message is in disposed state. If message identifier is null or exceeds 128 characters in length.

Gets or sets a partition key for sending a transactional message to a queue or topic that is not session-aware.

Returns .

Gets or sets a partition key value when a transaction is to be used to send messages via a transfer queue.

Returns .

Gets the properties of the brokered message.

The properties of the brokered message. If the message is in disposed state.

Gets or sets the address of the queue to reply to.

The reply to queue address. If the message is in disposed state.

Gets or sets the session identifier to reply to.

The session identifier to reply to.

Gets or sets the date and time of the sent time in UTC.

The enqueue time in UTC. This value represents the actual time of enqueuing the message. If the message is in disposed state.

Gets or sets the date and time in UTC at which the message will be enqueued.

The scheduled enqueue time in UTC. This value is for delayed message sending. It is utilized to delay messages sending to a specific time in the future. If the message is in disposed state. If the passed in value is DateTime.MaxValue.

Gets the unique number assigned to a message by the Service Bus.

The unique number assigned to a message by the Service Bus. If the message is in disposed state. If the message was not received from the message server.

Gets or sets the message’s time to live value. This is the duration after which the message expires, starting from when the message is sent to the Service Bus.Messages older than their TimeToLive value will expire and no longer be retained in the message store. Subscribers will be unable to receive expired messages.

The message’s time to live value. If the message is in disposed state. If the passed in value is less than or equal to TimeSpan.Zero.

Gets or sets the send to address.

The address of the destination queue. If the message is in disposed state.

Gets or sets whether to force persistence on this property.

true to force persistence on this property; otherwise, false.

Represents the correlation filter expression.

The CorrelationFilter provides an efficient shortcut for declarations of filters that deal only with correlation equality. In this case the cost of the lexigraphical analysis of the expression can be avoided. Not only will correlation filters be optimized at declaration time, but they will also be optimized at runtime. Correlation filter matching can be reduced to a hashtable lookup, which aggregates the complexity of the set of defined correlation filters to O(1).

Initializes a new instance of the class with default values.

Initializes a new instance of the class with the specified correlation identifier.

The identifier for the correlation. Thrown when the is null or empty.

Gets the identifier of the correlation.

The identifier of the correlation.

Gets the identifier of the message.

The identifier of the message.

Gets the address to send to.

The address to send to.

Gets the address of the queue to reply to.

The address of the queue to reply to.

Gets the application specific label.

The application specific label.

Gets the session identifier.

The session identifier.

Gets the session identifier to reply to.

The session identifier to reply to.

Gets the content type of the message.

The content type of the message.

Gets the application specific properties of the message.

The application specific properties of the message.

Gets a value indicating whether the expression requires preprocessing.

true if the expression requires preprocessing; otherwise, false.

Validates the object.

Gets the preprocessed filter expression.

The preprocessed filter expression.

Indicates whether a message matches against the current SQL expression.

The . true if a message matches against the current SQL expression; otherwise, false.

Converts the value of the current instance to its equivalent string representation.

A string representation of the current instance.

Represents the filter actions which are allowed for the transformation of a message that have been matched by a filter expression.

Filter actions allow for the transformation of a message that have been matched by a filter expression. The typical use case for filter acions is to append or update the properties that are attached to a message, for example assigning a group ID based on the correlation ID of a message.

Gets a value that indicates whether the rule action requires preprocessing.

true if the rule action requires preprocessing; otherwise, false.

Preprocesses the object.

The preprocessed object. Concrete implementation of this class is free to throw InvalidOperationException is this requires preprocessing.

Executes the filter action on the supplied BrokeredMessage.

Input BrokeredMessage. The modified BrokeredMessage after executing the rule action. Concrete implementation of this class is free to throw InvalidOperationException is this requires preprocessing.

Validates the rule action against the grammar.

Concrete implementation of this class is free to throw InvalidOperationException is this requires preprocessing.

The exception that is thrown for signaling filter action errors and is thrown when a filter related operation fails.

Initializes a new instance of the class with the specified error message.

The error message that explains the reason for the exception.

Initializes a new instance of the class with the specified error message and a reference to the inner exception that is the cause of this exception.

The error message that explains the reason for the exception. The exception that is the cause of the current exception.

Initializes a new instance of the RuleActionException with serialized data.

The object that holds the serialized object data. The contextual information about the source or destination.

The exception that is thrown for signaling filter action errors.

Initializes a new instance of the class using the specified message.

The exception message.

Initializes a new instance of the class using the specified message and inner exception.

The exception message. The inner exception.

Constructor.

The information. The context.

Describes a filter expression that is evaluated against a BrokeredMessage.

Filter is an abstract class with the following concrete implementations: SqlFilter that represents a filter using SQL syntax. CorrelationFilter that provides an optimization for correlation equality expressions.

Gets the type of the filter expression.

The type of the filter expression.

Gets a value indicating whether the filter expression requires preprocessing.

true if the filter expression requires preprocessing; otherwise, false.

Preprocesses the filter expression and returns a preprocessed FilterExpression.

The preprocessed FilterExpression. The operation is invalid with the current state of object.

Matches the BrokeredMessage against the FilterExpression.

The BrokeredMessage object. true if the BrokeredMessage matches the filtering expression; otherwise, false. The operation is invalid with the current state of object. Filter evaluation failed.

Validates the FilterExpression and make sure it complies with the valid grammar rules.

The filter statement is invalid or is potentially complex enough to consume too much computing power when evaluating the statement.

Matches a filter expression.

Initializes a new instance of the class.

Gets a value indicating whether the SQL filter expression requires preprocessing.

true if the SQL filter expression requires preprocessing; otherwise, false. Currently always returns true.

Matches a message against the current SQL expression.

The brokered message. true if it matches; otherwise, false.

Validates the SQL expression.

Gets the preprocessed filter expression.

The preprocessed filter expression.

Converts the value of the current instance to its equivalent string representation.

A string representation of the current instance.

Represents the false filter expression.

The Match None expression should be used if you want to create a subscription that initially block all messages. Typically in this scenario is you may want to create the subscription but want to enable this subscription at a later date. This filter will enable that scenario.

Initializes a new instance of the class.

Gets a value indicating whether the SQL filter expression requires preprocessing.

true if the SQL filter expression requires preprocessing; otherwise, false. Currently always returns true.

Matches a message against the current SQL expression.

The brokered message. true if it matches; otherwise, false.

Validates the SQL expression.

Gets the preprocessed filter expression.

The preprocessed filter expression.

Converts the current instance to its string representation.

A string representation of the current instance.

Represents set of actions written in SQL language-based syntax that is performed against a .

Initializes a new instance of the class with the specified SQL expression.

The SQL expression.

Initializes a new instance of the class with the specified SQL expression and compatibility level.

The SQL expression. Reserved for future use. An integer value showing compatibility level. Currently hard-coded to 20.

Gets the SQL expression.

The SQL expression.

This property is reserved for future use. An integer value showing the compatibility level, currently hard-coded to 20.

An integer value showing the compatibility level This property is reserved for future use.

Sets the value of a rule action.

The value of a rule action.

Gets a value indicating whether the requires preprocessing.

true if the SQL rule action requires preprocessing; otherwise, false. Currently always returns true.

Gets the pre-processed expression.

The preprocessed expression. Thrown when the rule action statement is invalid or exceeds maximum allowed number of actions.

Executes the object.

The to which the will be applied. The processed . Thrown when the operation is not valid for the current state.

Validates the SQL expression against the SQL 92 syntax and rules.

Thrown when the rule action statement is invalid or exceeds maximum allowed number of actions.

Returns a string representation of .

The string representation of .

Represents a filter which is a composition of an expression and an action that is executed in the pub/sub pipeline.

Initializes a new instance of the class using the specified SQL expression.

The SQL expression.

Gets the SQL expression.

The SQL expression.

This property is reserved for future use. An integer value showing the compatibility level, currently hard-coded to 20.

The compatibility level. This property is reserved for future use.

Sets the value of a filter expression.

The value of a filter expression.

Gets a value indicating whether the SQL filter expression requires preprocessing.

true if the SQL filter expression requires preprocessing; otherwise, false. Currently always returns true.

Validates the SQL expression.

Gets the preprocessed filter expression.

The preprocessed filter expression.

Specifies whether a message matches against the current SQL expression.

The BrokeredMessage. truea message matches against the current SQL expression; otherwise, false.

Returns a string representation of .

The string representation of . TODO - Document this - bug # 211769

This string is used by client to match the hostname of the endpoint to see if this is a IoT related endpoint, and if so we treat it special (mainly to assume client side redirect for these endpoint).

ExceptionPolicy.Transfer is used if you want the async result to be completed with the exception when the step throws.

ExceptionPolicy.Continue is used if you want to ignore the exception and continue next steps. The last exception ignored can be accessed with LastAsyncException property.

Provides string constants used in Microsoft Azure Service Bus Messaging.

Specifies the value for the Namespace string.

Specifies the value for the Tag string.

Specifies the value for the Action string.

Specifies the value for the Filter string.

Specifies the value for the Channels string.

Specifies the value for the Registrations string.

Specifies the value for the CorrelationFilter string.

Specifies the value for the Tags string.

Specifies the value for the PushVariables string.

Specifies the value for the DefaultMessageTimeToLive string.

Specifies the value for the AutoDeleteOnIdle string.

Specifies the value for the DefaultRuleDescription string.

Specifies the value for the RuleAction string.

Specifies the value for the EmptyRuleAction string.

Specifies the value for the EmptyFilterAction string.

Specifies the value for the NotificationHubDescription string.

Specifies the value for the NotificationHubCollection string.

Specifies the value for the QueueDescription string.

Specifies the value for the QueueCollection string.

Specifies the value for the AuthorizationRules string.

Specifies the value for the AllowRule string.

Specifies the value for the SharedAccessAuthorizationRule string.

Specifies the value for the KeyName string.

Specifies the value for the PrimaryKey string.

Specifies the value for the SecondaryKey string.

Specifies the value for the IsSystemKey string.

Specifies the value for the IssuerName string.

Specifies the value for the ClaimType string.

Specifies the value for the ClaimValue string.

Specifies the value for the Rights string.

Specifies the value for the LockDuration string.

Specifies the value for the DuplicateDetectionHistoryTimeWindow string.

Specifies the value for the TrueFilter string.

Specifies the value for the FalseFilter string.

Specifies the value for the MaxMessageSizeInBytes string.

Specifies the value for the MaxSizeInMegabytes string.

Specifies the value for the MaxSubscriptionsPerTopic string.

Specifies the value for the MaxSqlFiltersPerTopic string.

Specifies the value for the MaxCorrelationFiltersPerTopic string.

Specifies the value for the RequiresSession string.

Specifies the value for the RuleCollection string.

Specifies the value for the RuleDescription string.

Specifies the value for the Name string.

Specifies the value for the NamespaceAlias string.

Specifies the value for the IsSecondary string.

Specifies the value for the SyncNamespace string.

Specifies the value for the Tier string.

Specifies the value for the Size string.

Specifies the value for the Family string.

Specifies the value for the Capacity string.

Specifies the value for the CursorType string.

Specifies the value for the MessageRetentionInDays string.

Specifies the value for the SubscriptionCollection string.

Specifies the value for the SubscriptionDescription string.

Specifies the value for the ConsumerGroupCollection string.

Specifies the value for the ConsumerGroupDescription string.

Specifies the value for the EnableCheckpoint string.

Specifies the value for the PartitionDescription string.

Specifies the value for the RegistrationCollection string.

Specifies the value for the GcmRegistrationDescription string.

Specifies the value for the GcmTemplateRegistrationDescription string.

Specifies the value for the BaiduRegistrationDescription string.

Specifies the value for the BaiduTemplateRegistrationDescription string.

Specifies the value for the EmailRegistrationDescription string.

Specifies the value for the WindowsRegistrationDescription string.

Specifies the value for the WindowsTemplateRegistrationDescription string.

Specifies the value for the AppleRegistrationDescription string.

Specifies the value for the AppleTemplateRegistrationDescription string.

Specifies the value for the MpnsRegistrationDescription string.

Specifies the value for the MpnsTemplateRegistrationDescription string.

Specifies the value for the AdmRegistrationDescription string.

Specifies the value for the AdmTemplateRegistrationDescription string.

Specifies the value for the PnsCredential string.

Specifies the value for the PnsCredentials string.

Specifies the value for the GcmCredential string.

Specifies the value for the BaiduCredential string.

Specifies the value for the SmtpCredential string.

Specifies the value for the WnsCredential string.

Specifies the value for the ApnsCredential string.

Specifies the value for the AdmCredential string.

Specifies the value for the ResourceTags string.

Specifies the value for the EmailAddress string.

Specifies the value for the GcmRegistrationId string.

Specifies the value for the BaiduUserId string.

Specifies the value for the BaiduChannelId string.

Specifies the value for the MpnsCredential string.

Specifies the value for the MpnsHeaders string.

Specifies the value for the MpnsHeader string.

Specifies the value for the ChannelUri string.

Specifies the value for the SecondaryTileName string.

Specifies the value for the AdmRegistrationId string.

Specifies the value for the DeviceToken string.

Specifies the value for the Expiry string.

Specifies the value for the TemplateName string.

Specifies the value for the MessageType string.

Specifies the value for the SqlRuleAction string.

Specifies the value for the SqlFilter string.

Specifies the value for the RequiresDuplicateDetection string.

Specifies the value for the TopicCollection string.

Specifies the value for the TopicCount string.

Specifies the value for the QueueCount string.

Specifies the value for the RelayCount string.

Specifies the value for the NotificationHubCount string.

Specifies the value for the EventHubCount string.

Specifies the value for the TopicDescription string.

Specifies the value for the VolatileTopicCollection string.

Specifies the value for the VolatileTopicDescription string.

Specifies the value for the EventHubCollection string.

Specifies the value for the PartitionCollection string.

Specifies the value for the EventHubDescription string.

Specifies the value for the ArchiveDescription string.

Specifies the value for the IntervalInSeconds string.

Specifies the value for the SizeLimitInBytes string.

Specifies the value for the Destination string.

Specifies the value for the Encoding string.

Specifies the value for the RevokedPublisherDescription string.

Specifies the value for the RevokedPublisherCollection string.

Specifies the value for the EventHubPartitionCount string.

Specifies the value for the EventHubPartitionIds string.

Specifies the value for the RevokedPublishersStorageEntityName string.

Specifies the value for the BeginSequenceNumber string.

Specifies the value for the EndSequenceNumber string.

Specifies the value for the LastEnqueuedOffset string.

Specifies the value for the LastEnqueuedTimeUtc string.

Specifies the value for the LastCheckpoint string.

Specifies the value for the IncomingBytesPerSecond string.

Specifies the value for the OutgoingBytesPerSecond string.

Specifies the value for the EventHubPath string.

Specifies the value for the ConsumerGroupName string.

Specifies the value for the DeadLetteringOnMessageExpiration string.

Specifies the value for the DeadLetteringOnFilterEvaluationExceptions string.

Specifies the value for the MaxDeliveryCount string.

Specifies the value for the EnableBatchedOperations string.

Specifies the value for the SizeInBytes string.

Specifies the value for the MessageCount string.

Specifies the value for the FilteringMessagesBeforePublishing string.

Specifies the value for the IsAnonymousAccessible string.

Specifies the value for the EnableRuleAction string.

Specifies the value for the IsExpress string.

Specifies the value for the Status string.

Specifies the value for the CountDetails string.

Specifies the value for the ForwardTo string.

Specifies the value for the ForwardDeadLetteredMessagesTo string.

Specifies the value for the AccessedAt string.

Specifies the value for the UpdatedAt string.

Specifies the value for the CreateACSNamespace string.

Specifies the value for the EventHubEnabled string.

Specifies the value for the NamespaceTypeName string.

Specifies the value for the MessagingSkuName string.

Specifies the value for the MessagingSkuPlan string.

Specifies the value for the ResourceGroupName string.

Specifies the value for the CreatedAt string.

Specifies the value for the EntityStatus string.

Specifies the value for the EntityAvailabilityStatus string.

Specifies the value for the EnablePartitioning string.

Specifies the value for the EnableSubscriptionPartitioning string.

Specifies the value for the PartitionCount string.

Specifies the value for the PartitionRanges string.

Specifies the value for the MessageCountDetails string.

Specifies the value for the AccessRights string.

Specifies the value for the UserMetadata string.

Specifies the value for the IsHybridConnection string.

Specifies the value for the Checkpoint string.

Specifies the value for the SupportOrdering string.

Specifies the value for the EnableExpress string.

Specifies the value for the NewPath string.

Specifies the value for the SubscriptionCount string.

Specifies the value for the RelayDescription string.

Specifies the value for the RelayCollection string.

Specifies the value for the HybridConnectionDescription string.

Specifies the value for the HybridConnectionCollection string.

Specifies the value for the Path string.

Specifies the value for the ListenerType string.

Specifies the value for the ListenerCount string.

Specifies the value for the RelayType string.

Specifies the value for the IsDynamic string.

Specifies the value for the RequiresClientAuthorization string.

Specifies the value for the RequiresTransportSecurity string.

Specifies the value for the PublishToRegistry string.

Specifies the value for the Publishers string.

Specifies the value for the NamespaceDescription string.

Specifies the value for the NamespaceEntityStats string.

Specifies the value for the MessageContainerInfo string.

Specifies the value for the SBFarmInfo string.

Specifies the value for the ServiceInfo string.

Specifies the value for the HostStatus string.

Specifies the value for the HostId string.

Specifies the value for the HostName string.

Specifies the value for the ServiceName string.

Specifies the value for the Service string.

Specifies the value for the ServiceBusFarmStatusInfo string.

Specifies the value for the FarmType string.

Specifies the value for the SBFarmDBConnectionString string.

Specifies the value for the ClusterConnectionEndpointPort string.

Specifies the value for the ClientConnectionEndpointPort string.

Specifies the value for the LeaseDriverEndpointPort string.

Specifies the value for the ServiceConnectionEndpointPort string.

Specifies the value for the RunAsAccount string.

Specifies the value for the AdminGroup string.

Specifies the value for the GatewayDBConnectionString string.

Specifies the value for the HttpsPort string.

Specifies the value for the TcpPort string.

Specifies the value for the MessageBrokerPort string.

Specifies the value for the AmqpsPort string.

Specifies the value for the AmqpPort string.

Specifies the value for the FarmCertificate string.

Specifies the value for the EncryptionCertificate string.

Specifies the value for the Hosts string.

Specifies the value for the CertificateInfo string.

Specifies the value for the RPHttpsPort string.

Specifies the value for the RPHttpsUrl string.

Specifies the value for the FarmDNS string.

Specifies the value for the AdminApiUserName string.

Specifies the value for the TenantApiUserName string.

Specifies the value for the BrokerExternalUrls string.

Specifies the value for the Id string.

Specifies the value for the Host string.

Specifies the value for the DatabaseServer string.

Specifies the value for the DatabaseName string.

Specifies the value for the EntitiesCount string.

Specifies the value for the DatabaseSizeInMB string.

Specifies the value for the Region string.

Specifies the value for the IsAcsAvailable string.

Specifies the value for the ScaleUnitGatewayEndpoint string.

Specifies the value for the KafkaEnabled string.

Specifies the value for the ZoneRedundant string.

Specifies the value for the AcsManagementEndpoint string.

Specifies the value for the ServiceBusEndpoint string.

Specifies the value for the ConnectionString string.

Specifies the value for the SecondaryConnectionString string.

Specifies the value for the AuthorizationType string.

Specifies the value for the ConnectionDetail string.

Specifies the value for the PortalRedirect string.

Specifies the value for the Address string.

Specifies the value for the DefaultKey string.

Specifies the value for the SubscriptionId string.

Specifies the value for the ScaleUnit string.

Specifies the value for the DataCenter string.

Specifies the value for the Enabled string.

Specifies the value for the Critical string.

Specifies the value for the RegionCodeDescription string.

Specifies the value for the ConnectionInformationDescription string.

Specifies the value for the Code string.

Specifies the value for the FullName string.

Specifies the value for the ScaleUnitKey string.

Specifies the value for the NamespaceAvailability string.

Specifies the value for the Result string.

Specifies the value for the ReasonDetail string.

Specifies the value for the UserValidationResult string.

Specifies the value for the RegistrationId string.

Specifies the value for the RegistrationTtl string.

Specifies the value for the ExpirationTime string.

Specifies the value for the PnsCredentialName string.

Specifies the value for the WnsHeaders string.

Specifies the value for the BodyTemplate string.

Specifies the value for the IpFilterAuthorizationRule string.

Specifies the value for the IpFilterActionType string.

Specifies the value for the IpFilterAction string.

Specifies the value for the IpMaskString string.

Specifies the value for the VirtualNetworkAuthorizationRule string.

Specifies the value for the VirtualNetworkSubnetId string.

Specifies the value for the VnetTrafficTag string.

Specifies the value for the SubnetTrafficTag string.

Specifies the value for the DeviceChallenge string.

Specifies the value for the Channel string.

Specifies the value for the WANHRegistrationSecret string.

Specifies the value for the WANHExpirationTime string.

Specifies the value for the WANHDeviceChallenge string.

Specifies the value for the Data string.

Specifies the value for the IssueRegistrationSecretPayload string.

Specifies the value for the RegistrationSecretPayload string.

Specifies the value for the RegistrationSecretGcmPayload string.

Specifies the value for the ETag string.

Specifies the value for the UpdatePnsHandlePayload string.

Specifies the value for the NewPnsHandle string.

Specifies the value for the OriginalPnsHandle string.

Specifies the value for the RegistrationResult string.

Specifies the value for the RegistrationCounts string.

Specifies the value for the AllRegistrationsCount string.

Specifies the value for the WindowsRegistrationsCount string.

Specifies the value for the AppleRegistrationsCount string.

Specifies the value for the GcmRegistrationsCount string.

Specifies the value for the MpnsRegistrationsCount string.

Specifies the value for the AdmRegistrationsCount string.

Specifies the value for the BaiduRegistrationsCount string.

Specifies the value for the ApnsOutcomes string.

Specifies the value for the MpnsOutcomes string.

Specifies the value for the WnsOutcomes string.

Specifies the value for the GcmOutcomes string.

Specifies the value for the AdmOutcomes string.

Specifies the value for the NotificationBody string.

Specifies the value for the BaiduOutcomes string.

Specifies the value for the NotificationOutcomeCollection string.

Specifies the value for the NotificationDetails string.

Specifies the value for the NotificationId string.

Specifies the value for the Location string.

Specifies the value for the State string.

Specifies the value for the EnqueueTime string.

Specifies the value for the StartTime string.

Specifies the value for the EndTime string.

Specifies the value for the TargetPlatforms string.

Specifies the value for the Outcomes string.

Specifies the value for the NotificationHubJob string.

Specifies the value for the NotificationHubJobId string.

Specifies the value for the Progress string.

Specifies the value for the JobType string.

Specifies the value for the OutputContainerUri string.

Specifies the value for the ImportFileUri string.

Specifies the value for the InputProperties string.

Specifies the value for the OutputProperties string.

Specifies the value for the ApplicationPlatform string.

Specifies the value for the PnsHandle string.

Specifies the value for the Outcome string.

Specifies the value for the NotificationOutcome string.

Specifies the value for the Success string.

Specifies the value for the Failure string.

Specifies the value for the Results string.

Specifies the value for the RegistrationIds string.

Specifies the value for the IfMatch string.

Specifies the value for the RegistrationBoundVariable string.

Specifies the value for the ScheduledNotification string.

Specifies the value for the ScheduledNotificationPayload string.

Specifies the value for the ScheduledNotificationId string.

Specifies the value for the ScheduledNotificationTime string.

Specifies the value for the ScheduledNotificationTags string.

Specifies the value for the TrackingId string.

Specifies the value for the CancelScheduledNotification string.

Specifies the value for the AtomEntryContentType string.

Specifies the value for the TextContentType string.

Specifies the value for the DeleteMethod string.

Specifies the value for the GetMethod string.

Specifies the value for the PostMethod string.

Specifies the value for the PutMethod string.

Specifies the value for the PatchMethod string.

Specifies the value for the ManagementSuffix string.

Specifies the value for the EnumerationResourceName string.

Specifies the value for the XProcessAtHttpHeader string.

Specifies the value for the GetVersionInfo string.

Specifies the value for the GetVersionInfoHeaderName string.

Specifies the value for the XProcessAtHttpHeaderAttributeValue string.

Specifies the value for the ApiVersionName string.

Specifies the value for the ApiVersion string.

Specifies the value for the SKU string.

Specifies the value for the BillingTier string.

Specifies the value for the NotificationHubBillingTier string.

Specifies the value for the NotificationHubBillingPlan string.

Specifies the value for the NotificationHubBillingUsage string.

Specifies the value for the MaxAllowedMulticastTagsPerNamespace string.

Specifies the value for the MaxAllowedMonthlyPushes string.

Specifies the value for the MaxAllowedDevicesPerNamespace string.

Specifies the value for the MonthlyPushes string.

Specifies the value for the MaxAllowedUnits string.

Specifies the value for the MinAllowedUnits string.

Specifies the value for the MaxAllowedOperationsPerDayPerUnit string.

Specifies the value for the MaxAllowedRegistrationsPerUnit string.

Specifies the value for the MaxAllowedDevicesPerUnit string.

Specifies the value for the NotificationHubSKU string.

Specifies the value for the NotificationHubPlan string.

Specifies the value for the BillingVersion string.

Specifies the value for the LastBillingChange string.

Specifies the value for the NotificationHubPnsCredentials string.

Specifies the value for the DailyMaxActiveRegistrations string.

Specifies the value for the DailyMaxActiveDevices string.

Specifies the value for the MaxAllowedPushesPerDayPerUnit string.

Specifies the value for the MaxAllowedApiCallsPerDayPerUnit string.

Specifies the value for the DailyOperations string.

Specifies the value for the DailyPushes string.

Specifies the value for the DailyApiCalls string.

Specifies the value for the SelectedSKUMinUnits string.

Specifies the value for the SelectedSKUMaxUnits string.

Specifies the value for the CurrentSKUUnits string.

Specifies the value for the CurrentAbsoluteSKUUnits string.

Specifies the value for the NamespaceMessagingPlan string.

Specifies the value for the IsPremium string.

Specifies the value for the CurrentDatabaseCount string.

Specifies the value for the DesiredDatabaseCount string.

Specifies the value for the NamespaceSKU string.

Specifies the value for the SKUDescription string.

Specifies the value for the NamespaceSKUPlan string.

Specifies the value for the SelectedEventHubUnit string.

Specifies the value for the MessagingUnits string.

Specifies the value for the IsAutoInflateEnabled string.

Specifies the value for the MaximumThroughputUnit string.

Specifies the value for the AllowedMessagingUnits string.

Specifies the value for the ARMSKU string.

Specifies the value for the MinAllowedEventHubUnit string.

Specifies the value for the MaxAllowedEventHubUnit string.

Specifies the value for the UsageCredit string.

Specifies the value for the Identifier string.

Specifies the value for the RequestorService string.

Specifies the value for the NHBasicUnit string.

Specifies the value for the NHStandardUnit string.

Specifies the value for the Revision string.

Specifies the value for the OutputFilePath string.

Specifies the value for the FailedFilePath string.

Represents the exception that is thrown for signaling message store lock lost errors.

Initializes a new instance of the class with a specified error message.

The error message that explains the reason for the exception.

Initializes a new instance of the class with a specified error message and a reference to the inner exception that is the cause of this exception.

The error message that explains the reason for the exception. The exception that is the cause of the current exception.

Constructor.

Detail about the cause of the exception. The TrackingContext.

Constructor.

Detail about the cause of the exception. The TrackingContext. The inner exception.

Constructor.

The information. The context.

Represents the exception that is thrown for signaling messaging entity already exists errors.

Initializes a new instance of the class with the name of the entity.

The name of the entity.

Constructor.

Name of the entity. The TrackingContext.

Constructor.

The message. the tracking context The inner exception.

Populates the serialization information with data about the exception.

The serialized object data about the exception being thrown. The contextual information about the source or destinations.

The exception that is thrown for signaling messaging entity not found errors.

Initializes a new instance of the class with the entity name.

The name of the entity.

Initializes a new instance of the class with a specified error message and a reference to the inner exception that is the cause of this exception.

The error message that explains the reason for the exception. The exception that is the cause of the current exception.

Initializes a new instance of the class with the entity name.

he error message that explains the reason for the exception The exception that is the cause of the current exception. The TrackingContext.

Constructor.

Detail about the cause of the exception. The TrackingContext.

Constructor.

Detail about the cause of the exception. The TrackingContext. The inner exception.

Constructor.

The information. The context.

Returns a string representation of the current exception.

A string representation of the current exception.

Represents the exception that is thrown when a server is overloaded with logical operations.

Initializes a new instance of the class with a specified error message.

The error message that explains the reason for the exception.

Initializes a new instance of the class with a specified error message and a reference to the inner exception.

The error message that describes the cause of the exception. The inner exception that is the cause of the current exception.

Constructor.

The TrackingContext.

Constructor.

Detail about the cause of the exception. The TrackingContext.

Constructor.

The TrackingContext. The inner exception.

The exception that is thrown to signal session lock lost errors.In the case of partitioned messaging entities, partitions sometimes move to achieve load balancing across Service Bus nodes; for example, when a node restarts or new nodes are added to share the load. When that happens, session locks can be lost, but messages are never lost. If a partition moves after the session is locked, then the acknowledge/complete message processing call fails, because the lock is lost. However, the message remains and you can try to read it again. Thus, you may receive a exception even though the message itself is not lost. In this case, you can retry the message processing operation.

Initializes a new instance of the SessionLockLostException class with a specified error message.

The error message that explains the reason for the exception.

Initializes a new instance of the SessionLockLostException class with a specified error message and a reference to the inner exception that is the cause of this exception.

The error message that explains the reason for the exception. The exception that is the cause of the current exception.

Constructor.

The information. The context.

The exception that is thrown to signal message lock lost errors.

Initializes a new instance of the MessageLockLostException class with a specified error message.

The error message that explains the reason for the exception.

Initializes a new instance of the MessageLockLostException class with a specified error message and a reference to the inner exception that is the cause of this exception.

The error message that explains the reason for the exception. The exception that is the cause of the current exception.

MessageLockLost Constructor.

The serialization information object of for the streaming context. The stream context providing exception details.

The exception that is thrown to signal message not found errors.

Initializes a new instance of the class with a specified error message.

The error message that explains the reason for the exception.

Initializes a new instance of the class with a specified error message and a reference to the inner exception that is the cause of this exception.

The error message that explains the reason for the exception. The exception that is the cause of the current exception.

MessageNotFoundException Constructor.

Holds all the data needed to serialize or deserialize an object. The stream context providing exception details.

Represents the messaging factory settings.

Initializes a new instance of the class.

Initializes a new instance of the class with the specified messaging factory settings for cloning.

The specified messaging factory settings.

Gets or sets a value that indicates whether the messaging operation enables additional client timeout.

true if the messaging operation enables additional client timeout; otherwise, false.

Gets or sets the that specifies how long the messaging operation has to complete before timing out.

The that specifies how long the messaging operation has to complete before timing out. The default value is one minute. A null is set; for example, a nullable . A zero or negative is set.

Gets or sets the messaging transport type.

The messaging transport type.

Gets or sets the transport settings required for the net messaging.

The transport settings required for the net messaging.

Gets or set the transport settings for the Advanced Message Queuing Protocol (AMQP).

The transport settings for the Advanced Message Queuing Protocol (AMQP).

Gets or sets a value to indicate if entity level perf counters should be collected in memory. Note that this only affect entity level counters, and namespace level counters are always collected.

By default this is set to false - meaning by default we do collect entity level perf counters. Setting this value will not affect existing collected counters, and will only stop counters from new entity being collected.

Gets or sets the token provider of the factory settings.

The token provider of the factory settings.

Creates a copy of .

A created copy of .

Executes the asynchronous begin create factory action.

The uniform resource identifier. An delegate that references the method to invoke when the operation is complete. A user-defined object that contains information about the receive operation. An that references the asynchronous request to create factory.

Executes the asynchronous begin create factory action.

The collection of uniform resource identifiers. An delegate that references the method to invoke when the operation is complete. A user-defined object that contains information about the receive operation. An that references the asynchronous request to create factory.

Ends an asynchronous request to create factory.

An that references the asynchronous request to create factory. The newly created messaging factory.

Represents the exception that is thrown for signaling partition not owned errors.

Initializes a new instance of the class with a specified error message.

The error message that describes the cause of the exception.

Initializes a new instance of the class with a specified error message and a reference to the inner exception.

The error message that describes the cause of the exception. The inner exception that is the cause of the current exception.

Constructor.

The information. The context.

Represents the queue client object.

Gets the message receive mode when processing the received message.

The message when processing the received message.

Gets or sets the number of messages that the queue receiver can simultaneously request.

The number of messages that the queue receiver can simultaneously request. Takes effect on the next receive call to the server.

Gets or sets the messaging factory.

The messaging factory.

The internal sender that the client will use for IMessageSender operations.

The internal receiver that the client will use for IMessageReceiver operations.

The internal browser that the client will use for IMessageBrowser operations.

The internal bool indicating if it is a sub queue or not.

Creates a new copy of with specified path.

The path. The created . This method will attempt to retrieve the connection string information from either app.config, or web.config files. User must supply the connection string using the "AppSettings" section of the configuration. The format of the section is as follows:

Creates a new instance of the by using Azure Active Directory authentication context.

Fully qualified domain name for Service Bus. Most likely, {yournamespace}.servicebus.windows.net The path to the queue. AuthenticationContext for AAD. The app credential. The receive mode. that specifies how long the messaging operation has to complete before timing out Messaging transport type. The created .

Creates a new instance of the by using Azure Active Directory authentication context.

Fully qualified domain name for Sercvice Bus. Most likely, {yournamespace}.servicebus.windows.net The path to the queue. AuthenticationContext for AAD. The client assertion certificate credential. The receive mode. that specifies how long the messaging operation has to complete before timing out Messaging transport type. The created .

Creates a new instance of the by using Azure Active Directory authentication context.

Fully qualified domain name for Service Bus. Most likely, {yournamespace}.servicebus.windows.net The path to the queue. AuthenticationContext for AAD. ClientId for AAD. The user password credential. The receive mode. that specifies how long the messaging operation has to complete before timing out Messaging transport type. The created .

Creates a new instance of the by using Azure Active Directory authentication context.

Fully qualified domain name for Service Bus. Most likely, {yournamespace}.servicebus.windows.net The path to the queue. AuthenticationContext for AAD. ClientId for AAD. The redrectUri on Client App. Platform parameters User Identifier The receive mode. that specifies how long the messaging operation has to complete before timing out Messaging transport type. The created .

Creates a new instance of the by using Azure Managed Service Identity authentication.

Fully qualified domain name for Service Bus. Most likely, {yournamespace}.servicebus.windows.net The path to the queue. The receive mode. that specifies how long the messaging operation has to complete before timing out Messaging transport type. The created .

Creates a new copy of from a connection string with the specified queue path. Use this overload only when the connection string does not use the property.

The connection string used. The path to the queue. The created . Thrown when the format of the parameter is incorrect. This method should only be used with a connection string that has namespace level authentication because the connection string supplied should not have entity level information associated with it.

Creates a new instance of using the specified connection string.

The connection string to use. The newly created instance. Thrown when the format of the parameter is incorrect. This method expects the connection string supplied has entity level information such as the entity path and authentication information supplied.

Creates a new copy of with specified path and mode.

The path. The mode. The created . This method will attempt to retrieve the connection string information from either app.config, or web.config files. User must supply the connection string using the "AppSettings" section of the configuration. The format of the section is as follows:

Creates a new instance of from a connection string with the specified path and mode. Use this overload only when the connection string does not use the property.

The connection string. The path to the queue. The . The created . Thrown when the format of the parameter is incorrect. This method should only be used with a connection string that has namespace level authentication because the connection string supplied should not have entity level information associated with it.

Creates a new instance of using the specified connection string and receiving mode.

The connection string to use. The . The newly created instance. Thrown when the format of the parameter is incorrect. This method expects the connection string supplied has entity level information such as the entity path and authentication information supplied.

Builds a format name from the specified dead letter queue path.

The path to the dead letter queue. The resulted from building the format name for the specified dead letter queue path.

Registers the session handler with specific type.

The handler type.

Registers the session handler with specific type and handler options.

The handler type. The session handler options.

Asynchronously registers the session handler with specific type.

The handler type. The task object representing the asynchronous operation.

Asynchronously registers the session handler with specific type and handler options.

The handler type. The session handler options. The task object representing the asynchronous operation.

Registers a message session handler factory with specified options.

The handler factory to be registered. The handler options.

Registers a message session handler factory with specified options.

The handler factory to be registered. The handler options.

Asynchronously registers a message session handler factory.

The handler factory to be registered. The handler options. The task object representing the asynchronous operation.

Asynchronously registers a message session handler factory.

The handler factory to be registered. The handler options. The task object representing the asynchronous operation.

Processes a message in an event-driven message pump.

The method to invoke when the operation is complete.

Processes a message in an event-driven message pump, with the given set of options.

The method to invoke when the operation is complete. Specifies the options with which to instantiate the message pump.

Asynchronously processes a message.

The method to invoke when the operation is complete.

Asynchronously processes a message.

The method to invoke when the operation is complete. Calls a message option.

Accepts a message session that allows grouping of related messages for processing in a single transaction with whether in exclusive mode.

The session identifier of the message session. Ture if exclusive mode, or false is not. A that allows grouping of related messages for processing in a single transaction.

Accepts a message non-exclusive locked session that allows grouping of related messages for processing in a single transaction using the given session identifier and session lock token.

The session identifier of the message session. The session lock token. A that allows grouping of related messages for processing in a single transaction.

Accepts a message session that allows grouping of related messages for processing in a single transaction using the given session identifier with whether in exclusive mode.

The session identifier of the message session. Ture if exclusive mode, or false is not. The result of an asynchronous operation.

Accepts a message non-exclusive locked session that allows grouping of related messages for processing in a single transaction using the given session identifier and session lock token.

The session identifier of the message session. The session lock token. The result of an asynchronous operation.

Accepts a message session that allows grouping of related messages for processing in a single transaction using the given session identifier with whether in exclusive mode.

The session identifier of the message session. Ture if exclusive mode, or false is not. The server wait timeout A that allows grouping of related messages for processing in a single transaction.

Accepts a message non-exclusive locked session that allows grouping of related messages for processing in a single transaction using the given session identifier and session lock token.

The session identifier of the message session. The session locktoken The server wait timeout

Accepts a message session that allows grouping of related messages for processing in a single transaction using the given session identifier with whether in exclusive mode.

The session identifier of the message session. Ture if exclusive mode, or false is not. The server wait timeout

Accepts a message non-exclusive locked session that allows grouping of related messages for processing in a single transaction using the given session identifier and session lock token.

The session identifier of the message session. The session locktoken The server wait timeout

Accepts a message session that allows grouping of related messages for processing in a single transaction ith whether in exclusive mode.

Ture if exclusive mode, or false is not.

Accepts a message session that allows grouping of related messages for processing in a single transaction ith whether in exclusive mode.

Ture if exclusive mode, or false is not. The server wait timeout

Asynchronously accepts a message session that allows grouping of related messages for processing in a single transaction with whether in exclusive mode and wait time.

Ture if exclusive mode, or false is not. The result of an asynchronous operation.

Asynchronously accepts a message session that allows grouping of related messages for processing in a single transaction with whether in exclusive mode and wait time.

Ture if exclusive mode, or false is not. The time span the server waits for processing messages before it times out. The result of an asynchronous operation.

Accepts a message session that allows grouping of related messages for processing in a single transaction.

A that allows grouping of related messages for processing in a single transaction. Thrown if the operation exceeded the timeout value set by . Thrown if the client is already closed, aborted, or disposed.

Accepts a message session that allows grouping of related messages for processing in a single transaction using the given session identifier.

The session identifier of the message session. A that allows grouping of related messages for processing in a single transaction. Thrown if sessionId is null, empty, or white spaces. Thrown if the operation exceeded the timeout value set by . Thrown if the client is already closed, aborted, or disposed.

Accepts a message session that allows grouping of related messages for processing in a single transaction using the specified server wait time.

The time span the server waits for processing messages before it times out. A that allows grouping of related messages for processing in a single transaction. Thrown if is not a positive TimeSpan value. Thrown if the operation exceeded the timeout value set by . Thrown if the client is already closed, aborted, or disposed.

Accepts a message session that allows grouping of related messages for processing in a single transaction using the given session identifier and wait time.

The session identifier of the message session. The time span the server waits for processing messages before it times out. A that allows grouping of related messages for processing in a single transaction. Thrown if sessionId is null, empty, or white spaces. Thrown if is not a positive TimeSpan value. Thrown if the operation exceeded the timeout value set by . Thrown if the client is already closed, aborted, or disposed.

Asynchronously accepts a message session that allows grouping of related messages for processing in a single transaction.

The result of an asynchronous operation.

Asynchronously accepts a message session that allows grouping of related messages for processing in a single transaction using the given session identifier.

The session identifier of the message session. The result of an asynchronous operation.

Asynchronously accepts a message session that allows grouping of related messages for processing in a single transaction using the specified server wait time.

The time span the server waits for processing messages before it times out. The result of an asynchronous operation.

Asynchronously accepts a message session that allows grouping of related messages for processing in a single transaction using the given session identifier and wait time.

The session identifier of the message session. The time span the server waits for processing messages before it times out. The result of an asynchronous operation.

Ends a pending asynchronous accept session receiver.

An that stores state information and any user defined data for this asynchronous operation. Session Receiver object

Gets the message sessions, enabling you to browse sessions on queues.

The message session.

Retrieves all message sessions whose session state was updated since .

The time the session was last updated. The message sessions.

Asynchronously gets the message sessions, enabling you to browse sessions on queues.

The asynchronous operation.

Asynchronously retrieves all message sessions whose session state was updated since .

The time the session was last updated. The asynchronous operation.

Executes the begin create sender action.

The maximum time before this operation times out. An delegate that references the method to invoke when the operation is complete. A user-defined object that contains information about the receive operation. This object is passed to the delegate when the operation is complete. An object that references the asynchronous parent method

Executes the end create sender action.

An object that references the asynchronous parent method. A object.

Executes the begin create receiver action.

The message receive mode. The maximum time before this operation times out. An delegate that references the method to invoke when the operation is complete. A user-defined object that contains information about the receive operation. This object is passed to the delegate when the operation is complete. An object that references the asynchronous parent method.

Executes the begin create receiver action.

Name of the sub-queue. The message receive mode. The maximum time before this operation times out. An delegate that references the method to invoke when the operation is complete. A user-defined object that contains information about the receive operation. This object is passed to the delegate when the operation is complete. An object that references the asynchronous parent method.

Executes the end create receiver action.

The result of the asynchronous operation. A object.

Executes the begin create browser action.

The maximum time before this operation times out. An delegate that references the method to invoke when the operation is complete. A user-defined object that contains information about the peek operation. This object is passed to the EndCreateBrowser delegate when the operation is complete. An that references the asynchronous CreateBrowser.

Executes the end create browser action.

The result of the asynchronous EndCreateBrowser operation. Message browser object

Executes upon calling the EndAcceptMessageSession operation.

An that represents the status of the asynchronous accept message session operation. The that allows grouping of related messages for processing in a single transaction.

Executes the BeginGetMessageSessions action.

The date and time of the last update. An delegate that references the method to invoke when the operation is complete. A user-defined object that contains state information about the asynchronous operation. An that references the asynchronous operation to get the message sessions.

Executes the end get message action.

The result of the session. The that allows grouping of related messages for processing in a single transaction.

Executes upon calling the Abort event.

Executes upon calling the Close action.

The maximum time before the close operation times out.

Executes when the Close operation is called.

The maximum time before the close operation times out. An delegate that references the method to invoke when the operation is complete. A user-defined object that contains information about the receive operation. This object is passed to the EndClose delegate when the operation is complete. An object that references the asynchronous parent method.

Executes the end close action.

The result of the asynchronous parent method.

Discards the message and relinquishes the message lock ownership.

The lock token bound to the locked message instance to abandon. Thrown if the operation exceeded the timeout value set by . Thrown if the client entity has been closed or aborted. When the client fails to get the message from the queue/topic, this method should be called. The Service Bus will increment the delivery count of the message. The client now can either attempt to receive the message again or move it to the dead-letter queue.

Discards the message and relinquishes the message lock ownership.

The lock token bound to the locked message instance to abandon. The properties of the message to modify. When the client fails to get the message from the queue/topic, this method should be called. The Service Bus will increment the delivery count of the message. The client now can either attempt to receive the message again or move it to the dead-letter queue.

Asynchronously discards the message and relinquishes the message lock ownership.

The lock token bound to the locked message instance to abandon. The discarded message.

Asynchronously discards the message and relinquishes the message lock ownership.

The lock token bound to the locked message instance to abandon. The properties of the message to modify. The discarded message.

Begins an abandon.

Updates properties on the message being abandoned. The lockToken of the BrokeredMessage. An delegate that references the method to invoke when the operation is complete. A user-defined object that contains information about the receive operation. This object is passed to the EndAbandon delegate when the operation is complete. An that references the asynchronous AcceptMessageSession.

Ends the message abandon operation.

An that references the Abandon.

Completes processing of a message.

The lock token bound to the locked message instance. Thrown if the operation exceeded the timeout value set by Thrown if the client entity has been closed or aborted. Thrown if the message represented by the has lost the message lock. This method is used as a handshake between the client and Service Bus for a guaranteed delivery of the message. If the client failed before calling this method, the message will be kept in the queue.

Asynchronously completes processing of a message.

The lock token bound to the locked message instance. The asynchronous operation.

Completes processing of a message batch.

The lock tokens associated with locked messages in the batch. This method is used as a handshake between the client and Service Bus for a guaranteed delivery of the message. If the client failed before calling this method, the message will be kept in the queue.

Asynchronously completes processing of a message batch.

The lock tokens associated with locked messages in the batch. The asynchronous operation.

Begins a complete.

The lockToken of the BrokeredMessage. This is only available when a message is received in peek-lock mode. Lock token is used internally to complete or abandon message. An delegate that references the method to invoke when the operation is complete. A user-defined object that contains information about the receive operation. This object is passed to the delegate when the operation is complete. An that references the asynchronous Complete.

Begins a complete operation for a batch of messages.

The lockTokens of a set of BrokeredMessage objects. This is only available when a message is received in peek-lock mode. Lock token is used internally to complete or abandon message. An delegate that references the method to invoke when the operation is complete. A user-defined object that contains information about the receive operation. This object is passed to the delegate when the operation is complete. An that references the asynchronous Complete.

Ends a complete.

An that references the Complete.

Ends a complete operation for a batch of message lock tokens.

An that references the Complete.

Suspends the processing of a message.

The lock token bound to the locked message instance. Thrown if the operation exceeded the timeout value set by Thrown if the client entity has been closed or aborted. Thrown if the message represented by the has lost the message lock. Before deferring, you should set aside the message receipt for later retrieval.

Suspends the processing of a message.

The lock token bound to the locked message instance. The properties of the message to modify. Before deferring, you should set aside the message receipt for later retrieval.

Asynchronously suspends the processing of a message.

The lock token bound to the locked message instance. The asynchronous operation.

Asynchronously suspends the processing of a message.

The lock token bound to the locked message instance. The properties of the message to modify. The asynchronous operation.

Asynchronous version of Defer method.

Message's lock toekn Updates properties on the message being deferred. An delegate that references the method to invoke when the operation is complete. A user-defined object that contains information about the receive operation. This object is passed to the EndDefer delegate when the operation is complete. An that references the asynchronous Complete.

Ends the message defer operation.

An that references the Complete.

Moves the undelivered message to the dead letter queue.

The lock token bound to the locked message instance. Thrown if the operation exceeded the timeout value set by Thrown if the client entity has been closed or aborted. Thrown if the message represented by the has lost the message lock.

Moves the undelivered message to the dead letter queue.

The lock token bound to the locked message instance. The properties of the message to modify.

Moves the undelivered message to the dead letter queue.

The lock token bound to the locked message instance. The reason for deadlettering the message. The error description for deadlettering the message. Thrown if the operation exceeded the timeout value set by Thrown if the client entity has been closed or aborted. Thrown if the message represented by the has lost the message lock.

Asynchronously moves the undelivered message to the dead letter queue.

The lock token bound to the locked message instance. The asynchronous operation.

Asynchronously moves the undelivered message to the dead letter queue.

The lock token bound to the locked message instance. The properties of the message to modify. The asynchronous operation.

Asynchronously moves the undelivered message to the dead letter queue.

The lock token bound to the locked message instance. The reason for deadlettering the message. The error description for deadlettering the message. The asynchronous operation.

Asynchronous version of DeadLetter method

The message lockToken. Updates properties on the message being deadlettered. An delegate that references the method to invoke when the operation is complete. A user-defined object that contains information about the receive operation. This object is passed to the EndDeadLetter delegate when the operation is complete. An that references the asynchronous Complete.

Asynchronous version of DeadLetter method

The message lockToken. The reason for dead-lettering the message. The description information for dead-lettering the message. An delegate that references the method to invoke when the operation is complete. A user-defined object that contains information about the receive operation. This object is passed to the EndDeadLetter delegate when the operation is complete. An that references the asynchronous Complete.

Ends a move to dead letter queue.

An that references the Complete. Thrown when operation times out

Receives a message using the .

The that represents the received message. If no message is available to be received, the method returns NULL, and you can retry the operation at a later time. Thrown if the client entity has been closed or aborted. Thrown if the message receive operation times out. Thrown if an I/O or security error occurs. Thrown if the messaging entity associated with the operation does not exist or it has been deleted. Thrown if the user code has performed some unexpected operations, or the Service Bus gateway is down. Check the exception message for the actual error. A Null can be return by this API if operation exceeded the timeout specified, or the operations succeeded but there are no more messages to be received.

Receives a message using the .

The time span the server waits for receiving a message before it times out. The that represents the received message. If no message is available to be received, the method returns NULL, and you can retry the operation at a later time. Thrown if the is negative. Thrown if the message receive operation times out. Thrown if the client entity has been closed or aborted. Thrown if an I/O or security error occurs. Thrown if the messaging entity associated with the operation does not exist or it has been deleted. Thrown if the user code has performed some unexpected operations, or the Service Bus gateway is down. Check the exception message for the actual error. A Null can be return by this API if operation exceeded the timeout specified, or the operations succeeded but there are no more messages to be received.

Receives a message using the .

The sequence number of the deferred message to receive. The that represents the received message. If no message is available to be received, the method returns NULL, and you can retry the operation at a later time. Thrown if the client entity has been closed or aborted. A Null can be return by this API if operation exceeded the timeout specified, or the operations succeeded but the message with the requested sequenceNumber cannot be located.

Receives a message batch.

The number of messages to return in the batch. As this is an approximation, fewer or more messages than may be returned. A message batch. A Null can be return by this API if operation exceeded the timeout specified, or the operations succeeded but there are no more messages to be received.

Receives a message batch.

The number of messages to receive in a batch.As this is an approximation, fewer or more messages than may be returned. The time span that the server will wait for the message batch to arrive before it times out. A message batch. A Null can be return by this API if operation exceeded the timeout specified, or the operations succeeded but there are no more messages to be received.

Receives a message batch.

The sequence numbers associated with the messages in the batch. A message batch. A Null can be return by this API if operation exceeded the timeout specified, or the operations succeeded but the message with the requested sequenceNumber cannot be located.

Asynchronously receives a message using the .

The asynchronous operation.

Asynchronously receives a message using the .

The time span the server waits for receiving a message before it times out. The asynchronous operation.

Asynchronously receives a message using the .

The sequence number of the deferred message to receive. The asynchronous operation.

Asynchronously receives a message batch.

The number of messages to return in the batch. As this is an approximation, fewer or more messages than may be returned. The asynchronous operation.

Asynchronously receives a message batch.

The number of messages to return in the batch. As this is an approximation, fewer or more messages than may be returned. The time span that the server will wait for the message batch to arrive before it times out. The asynchronous operation.

Asynchronously receives a message batch.

The sequence numbers associated with the messages in the batch. The asynchronous operation.

Asynchronous version of Receive method.

The server wait time before it times out. An delegate that references the method to invoke when the operation is complete. A user-defined object that contains information about the receive operation. This object is passed to the EndReceive delegate when the operation is complete. An that references the asynchronous Complete.

Asynchronous version of ReceiveBatch method.

The number of messages to receive in a batch. The server wait time before it times out. An delegate that references the method to invoke when the operation is complete. A user-defined object that contains information about the receive operation. This object is passed to the EndReceive delegate when the operation is complete. An that references the asynchronous Complete.

Asynchronous version of Receive method.

The sequence number of a message. This is given by Service Bus to a message that user use to reference the message for an entity. An delegate that references the method to invoke when the operation is complete. A user-defined object that contains information about the receive operation. This object is passed to the EndReceive delegate when the operation is complete. An that references the asynchronous Complete.

Asynchronous version of Receive method.

The sequence number of a message. This is given by Service Bus to a message that user use to reference the message for an entity. An delegate that references the method to invoke when the operation is complete. A user-defined object that contains information about the receive operation. This object is passed to the EndReceive delegate when the operation is complete. An that references the asynchronous Complete.

Ends a message receive operation.

An that references the Complete. return the Received BrokeredMessage. A null is return if receive operation cannot obtain the message within . A Null can be return by this API if operation exceeded the timeout specified, or the operations succeeded but there are no more messages to be received.

Ends a receive operation for a batch of messages.

An that references the Complete. return the Received BrokeredMessage. A null is return if receive operation cannot obtain the message within . A Null can be return by this API if operation exceeded the timeout specified, or the operations succeeded but there are no more messages to be received.

Sends a message using the .

The message to send. Thrown when operation times out. Timeout period is initialized through the may need to increase the value of to avoid this exception if timeout value is relatively low. Thrown when the is null. Thrown if the has already been sent by a QueueClient or once already. Thrown if the topic/subscription pointed to does not support the send operation. That is, Deadletter queue does not support send operations. Thrown if the client entity has been closed or aborted. Thrown if there is an I/O or security error. Thrown when an error occurs during serialization or deserialization. Thrown if the queue does not exist. Thrown if there is a messaging error.

Asynchronously sends a message using the .

The message to send. The asynchronous operation.

Sends a set of brokered messages (for batch processing).

The collection of brokered messages to send.

Asynchronously sends a set of brokered messages (for batch processing).

The collection of brokered messages to send. The asynchronous operation.

Begins an asynchronous request to send a BrokeredMessage.

The BrokeredMessage to send. An delegate that references the method to invoke when the operation is complete. A user-defined object that contains information about the receive operation. This object is passed to the delegate when the operation is complete. An that references the asynchronous create a queue. Thrown when operation times out. Timeout period is initialized through the . You may need to increase the value of to avoid this exception if timeout value is relatively low. Thrown when the BrokeredMessage is null.

Begins an asynchronous request to send a batch of BrokeredMessage.

The list of BrokeredMessage objects to send. An delegate that references the method to invoke when the operation is complete. A user-defined object that contains information about the receive operation. This object is passed to the delegate when the operation is complete. An that references the asynchronous create a queue. Thrown when operation times out. Timeout period is initialized through the . You may need to increase the value of to avoid this exception if timeout value is relatively low. Thrown when the BrokeredMessage is null.

Ends an asynchronous request to send a message.

An that references the send method.

Ends an asynchronous request to send a batch of messages.

An that references the send method.

Returns without removing the first message in the queue.

A brokered message. Returns all properties and the message body. A Null can be return by this API if operation exceeded the timeout specified, or the operations succeeded but there are no more messages to be received.

Returns without removing the first message in the queue.

The starting point from which to browse a message. The brokered message. A Null can be return by this API if operation exceeded the timeout specified, or the operations succeeded but there are no more messages to be received.

Asynchronously returns without removing the first message in the queue.

The asynchronous operation.

Asynchronously returns without removing the first message in the queue.

The sequence number from where to peek a message. The asynchronous operation.

Peeks a batch of messages.

The number of messages. A batch of messages peeked. Returns all properties and the message body. A Null can be return by this API if operation exceeded the timeout specified, or the operations succeeded but there are no more messages to be received.

Peeks a batch of messages.

The starting point from which to browse a batch of messages. The number of messages. A batch of messages peeked.

Asynchronously peeks a batch of message.

The number of message. The asynchronous operation.

Asynchronously peeks a batch of message.

The sequence number from where to peek a batch of message. The number of message. The asynchronous operation.

Asynchronous version of Peek method.

The sequence number of message to start peeking from. An delegate that references the method to invoke when the operation is complete. A user-defined object that contains information about the receive operation. This object is passed to the EndReceive delegate when the operation is complete. An that references the asynchronous Complete.

Asynchronous version of Peek method.

The maximum number of messages to peek. The sequence number of message to start peeking from. An delegate that references the method to invoke when the operation is complete. A user-defined object that contains information about the receive operation. This object is passed to the EndReceive delegate when the operation is complete. An that references the asynchronous Complete.

Ends a message Peek operation.

An that references the Complete. return a list of peeked BrokeredMessages. An empty list is returned if peek operation cannot obtain the message within . A Null can be return by this API if operation exceeded the timeout specified, or the operations succeeded but there are no more messages to be peeked.

Ends a message Peek operation.

An that references the Complete. return a peeked BrokeredMessage. A null is returned if peek operation cannot obtain the message within . A Null can be return by this API if operation exceeded the timeout specified, or the operations succeeded but there are no more messages to be peeked.

Sends a scheduled message

Message to be scheduled Time of enqueue Sequence number that is needed for cancelling.

Cancels a scheduled message

Returned on scheduling a message.

Represents the metadata description of the queue.

The message time to live default value in bytes

Initializes a new instance of the class with the specified relative path.

Path of the queue relative to the namespace base address.

Gets or sets the duration of a peek lock; that is, the amount of time that the message is locked for other receivers. The maximum value for is 5 minutes; the default value is 1 minute.

The duration of the lock.

Gets or sets the maximum size of the queue in megabytes, which is the size of memory allocated for the queue.

The maximum size of the queue in megabytes.

Gets or sets the value indicating if this queue requires duplicate detection.

true if this queue requires duplicate detection; otherwise, false.

Gets or sets a value that indicates whether the queue supports the concept of session.

true if the receiver application can only receive from the queue through a ; false if a queue cannot receive using .

Gets or sets the default message time to live value. This is the duration after which the message expires, starting from when the message is sent to Service Bus. This is the default value used when is not set on a message itself.Messages older than their TimeToLive value will expire and no longer be retained in the message store. Subscribers will be unable to receive expired messages.A message can have a lower TimeToLive value than that specified here, but by default TimeToLive is set to . Therefore, this property becomes the default time to live value applied to messages.

The default message time to live value.

Gets or sets the idle interval after which the queue is automatically deleted. The minimum duration is 5 minutes.

The auto delete on idle time span for the queue.

Gets or sets a value that indicates whether this queue has dead letter support when a message expires.

true if the queue has a dead letter support when a message expires; otherwise, false.

Gets or sets the structure that defines the duration of the duplicate detection history. The default value is 10 minutes.

The structure that represents the time windows for duplication detection history.

Gets or sets the name of the queue.

The name of the queue. This is a relative path to the .

Gets or sets the maximum delivery count. A message is automatically deadlettered after this number of deliveries.

The number of maximum deliveries. The default value is 10.

Gets or sets a value that indicates whether server-side batched operations are enabled.

true if the batched operations are enabled; otherwise, false.

New name

Gets the size of the queue in bytes.

The size of the queue.

Gets the number of messages in the queue.

The number of messages.

Gets message details for a queue.

Returns with the number of active messages, dead letters, scheduled messages, messages transferred to other queues, subscriptions, or topics, and the number of messages transferred to the dead letter queue.

Gets the .

The .

Gets or sets a value that indicates whether the message is anonymous accessible.

true if the message is anonymous accessible; otherwise, false.

Gets or sets a value that indicates whether the queue supports ordering.

true if the queue supports ordering; otherwise, false.

Gets or sets the current status of the queue (enabled or disabled). When an entity is disabled, that entity cannot send or receive messages.

The current status of the queue.

Gets the entity availability status for the queue.

The entity availability status for the queue.

Gets or sets the path to the recipient to which the message is forwarded.

The path to the recipient to which the message is forwarded.

Gets or sets the path to the recipient to which the dead lettered message is forwarded.

The path to the recipient to which the dead lettered message is forwarded.

Gets the exact time the message was created.

The time the message was created.

Gets the exact time the message has been updated.

The time the message has been updated.

Gets the last time a message was sent, or the last time there was a receive request to this queue.

The last time a message was sent, or the last time there was a receive request to this queue.

Gets or sets a value that indicates whether the queue to be partitioned across multiple message brokers is enabled.

true if the queue to be partitioned across multiple message brokers is enabled; otherwise, false.

Gets or sets the user metadata.

The user metadata.

Gets or sets a value that indicates whether Express Entities are enabled. An express queue holds a message in memory temporarily before writing it to persistent storage.

true if Express Entities are enabled; otherwise, false.

The exception that is thrown for signaling quota exceeded errors.

Initializes a new instance of the class with a specified error message.

The error message that explains the reason for the exception.

Initializes a new instance of the class with a specified error message and a reference to the inner exception that is the cause of this exception.

The error message that explains the reason for the exception. The exception that is the cause of the current exception.

Constructor.

Detail about the cause of the exception. The TrackingContext.

Constructor.

Detail about the cause of the exception. The TrackingContext. The inner exception.

Initializes a new instance of the class with serialized data.

The object that contains the serialized information about the exception. The contextual information about the source or destination.

This exception is thrown if two or more objects connect to the same Event Hubs partition with different epoch values.

Initializes a new instance of the class with the specified exception message.

The exception message.

Initializes a new instance of the class with the specified exception message and inner exception text.

The exception message. The inner exception text.

Represents the approximate receiver runtime information for a logical partition of an Event Hub.

Gets the partition ID for a logical partition of an Event Hub.

The partition identifier.

Gets the last sequence number of the event within the partition stream of the Event Hub.

The logical sequence number of the event.

Gets the enqueued UTC time of the last event.

The enqueued time of the last event.

Gets the offset of the last enqueued event.

The offset of the last enqueued event.

Gets the time of when the runtime info was retrieved.

The enqueued time of the last event.

Represents a description of a rule.

The default name used in creating default rule when adding subscriptions to a topic. The name is "$Default".

Initializes a new instance of the class with default values.

Initializes a new instance of the class with the specified name.

The name of the rule.

Initializes a new instance of the class with the specified filter expression.

The filter expression used to match messages.

Initializes a new instance of the class with the specified name and filter expression.

The name of the rule. The filter expression used to match messages.

Gets or sets the filter expression used to match messages.

The filter expression used to match messages. null (Nothing in Visual Basic) is assigned.

Gets or sets the action to perform if the message satisfies the filtering expression.

The action to perform if the message satisfies the filtering expression.

Gets or sets the name of the rule.

Returns a Representing the name of the rule.

Gets creation time of the rule.

The creation time of the rule.

Gets the name of the collection.

The name of the collection.

Values that represent the current message's state in the system.

Message in the queue and ready to be sent to its receiver(s)

Message delivery is acknowledged in the system

Message delivery is deferred by the its receiver.

Message is abandoned by receiver and delivery count is updated.

Enumerates a message state.

Specifies an active message state.

Specifies a deferred message state.

Specifies the scheduled message state.

Represents a message session that allows grouping of related messages for processing in a single transaction.

Gets or sets the number of messages that the message receiver can simultaneously request.

The number of messages that the message receiver can simultaneously request.

Gets or sets the last peeked sequence number in the session.

The last peeked sequence number in the session.

Gets or sets the date and time at which the message session is unlocked.

The date and time for the message session to be locked.

The lock token

Gets or sets the message session identifier.

The message session identifier.

Gets the inner receiver for this session receiver.

Sets the inner receiver for this session receiver.

The inner receiver for this session receiver.

Executes the begin try receive action.

TrackingContext to use. Number of messages. The timeout. The callback. The state. .

Executes the end try receive operation of the message receiver.

An that references the asynchronous operation to try to receive messages. When this method returns, contains the received message collection. true if it succeeds; false if it fails.

Executes the begin try receive action.

TrackingContext to use. Number of messages. The timeout. The callback. The state. .

Executes the end try receive operation of the message receiver.

An that references the asynchronous operation to try to receive messages. When this method returns, contains the received message collection. true if it succeeds; false if it fails.

Completes a peek locked message.

TrackingContext to use. The lock tokens. The timeout.

Executes upon calling the OnComplete or BeginComplete operation.

An that references the asynchronous operation to close the communication object for the message session. The context information associated by a transaction tracking this operation. The collection of lock tokens bound to the locked message instances. The start of the synchronization. The time span interval the operation waits before it times out. An delegate that references the method to invoke when the operation is complete. A user-defined object that contains state information about the asynchronous operation.

Executes upon calling the OnComplete or BeginComplete operation.

An that references the asynchronous operation to close the communication object for the message session. The context information associated by a transaction tracking this operation. A collection of delivery tags. The start of the synchronization. The time span interval the operation waits before it times out. An delegate that references the method to invoke when the operation is complete. A user-defined object that contains state information about the asynchronous operation.

Executes the end complete operation of the message receiver.

An that references the asynchronous operation to complete receiving of messages.

Abandons a peek locked message.

TrackingContext to use. The lock tokens. The timeout.

Executes the begin abandon action.

The lock tokens. The properties to add for the abandon action. The timeout. The callback. The state. .

Ends an asynchronous operation to abandon the message and relinquish its lock.

An that references the asynchronous operation to abandon the messages and relinquish its lock.

Aborts the message session.

Begins an asynchronous operation to close the communication object for the message session.

The time span interval the operation waits before it times out. An delegate that references the method to invoke when the operation is complete. A user-defined object that contains state information about the asynchronous operation. An that references the asynchronous operation to close the communication object for the message session.

Ends an asynchronous operation to close the communication object for the message session.

An that references the asynchronous operation to close the communication object for the message session.

Executes upon calling the OnOpen operation of the message receiver.

The time span interval the operation waits before it times out. An delegate that references the method to invoke when the operation is complete. A user-defined object that contains state information about the asynchronous operation. An that references the asynchronous operation to open a communication object for the message session.

Ends the asynchronous operation to open a communication object for the message session.

An that references the asynchronous operation to open a communication object for the message session.

Executes the try receive action.

TrackingContext to use. The receipts. The timeout. the output message (out)

Executes the try receive action.

TrackingContext to use. The number of messages. The server wait time before it times out. returned messages.

Executes the begin try receive action.

TrackingContext to use. The receipts. The timeout. The callback. The state. .

Defers a message.

TrackingContext to use. The lock tokens. message properties to modify. The timeout.

Executes the begin defer action.

TrackingContext to use. The lock tokens. message properties to modify. The timeout. The callback. The state.

Executes the end defer operation of the message receiver.

An that references the asynchronous operation to suspend processing of messages.

Moves a message to the dead letter queue.

Executes the begin move to dead letter queue action.

TrackingContext to use. The lock tokens. message properties to modify. The reason for deadlettering the message. The description information for deadlettering the message. true if this was called from a sync method. The timeout. The callback. The state. .

Executes the end deadletter operation of the message receiver.

An that references the asynchronous operation to move undelivered messages to the deadletter queue.

Gets the state of the message session.

The stream from which the state information is persisted.

Asynchronously gets the state of the message session.

The stream from which the state information is persisted.

Gets the state.

The trackingContext. The state.

Sets the state of the message session.

The stream to which the state information is persisted.

Asynchronously sets the state of the message session.

The stream to which the state information is persisted. The state of the message session.

Sets a state.

The trackingContext. The stream.

Begins a get state.

The callback. The state. .

Ends a get state.

The result. .

Begins a set state.

The stream. The callback. The state. .

Ends a set state.

The result.

Specifies the time period within which the host renews its lock on a message.

If is true, you can retry the operation immediately. You can retry the operation immediately. You can retry the operation immediately. Thrown instead of if the message is from a .

Specifies the time period within which the host renews its lock on a message.

The host that is being locked.

Executes upon calling the RenewLock or BeginRenewLock operation.

An that references the asynchronous operation to get the state of the operation. The context information associated by a transaction tracking this operation. The time span interval the operation waits before it times out. An delegate that references the method to invoke when the operation is complete. A user-defined object that contains state information about the asynchronous operation.

Executes the EndRenewLock operation of the message receiver.

An that references the asynchronous operation to get the state of the message session. The date and time when the renewal of lock ends.

Executes the RenewLock action for message locks.

The time span the operation waits before it times out. The context information associated by a transaction tracking this operation. The time span interval the operation waits before it times out.

Executes upon calling the OnBegin operation for lock messages.

An that references the asynchronous operation to renew processing of lock messages. The context information associated by a transaction tracking this operation. The collection of lock tokens bound to the locked message instances. The start of the synchronization. The time span the operation waits before it times out. An delegate that references the method to invoke when the operation is complete. A user-defined object that contains state information about the asynchronous operation.

Executes the EndRenew action for message locks.

The result of the operation. An of locked messages..

Executes upon calling the OnPeek or BeginPeek operation.

An that references the asynchronous operation to peek a communication of the message session. The context information associated by a transaction tracking this operation. The sequence number to peek from the session. The number of message in the operation. The time span interval the operation waits before it times out. An delegate that references the method to invoke when the operation is complete. A user-defined object that contains state information about the asynchronous operation.

Executes upon calling the EndPeek operation.

An that references the asynchronous operation to peek a communication of the message session. The list of message from the session.

Executes the begin get state action.

The TrackingContext to use. The timeout. The callback. The state. .

Executes upon calling the OnGetState or EndGetState operation.

An that references the asynchronous operation to get the state of the message session. The stream from which the state information is persisted.

Executes the get state action.

The TrackingContext to use. The timeout. .

Executes the begin set state action.

The TrackingContext to use. The state. The timeout. The callback. The state. .

Ends the asynchronous operation to set the state of the message session.

An that references the asynchronous operation to set the state of the message session.

Executes the set state action.

The TrackingContext to use. The stream. The timeout.

Represents the exception that is thrown when a message cannot acquire lock on a session.

Initializes a new instance of the class with a specified error message.

The error message that describes the cause of the exception.

Initializes a new instance of the class with a specified error message and a reference to the inner.

The error message that describes the cause of the exception. The inner exception that is the cause of the current exception.

Values that represent SubqueueType.

The Active Subqueue.

The DeadLettered Subqueue.

The Scheduled Subqueue.

The system Subqueue

Represents the anchor class used in run-time operations related to a topic subscription.

// Create subscription client SubscriptionClient mySubscriptionClient = factory.CreateSubscriptionClient(mySubscription); // Receive messages for (int count = 0; count < MsgCount; count++) { var message = mySubscriptionClient.Receive(); message.Complete(); }

Gets the full pathname of the topic.

The full pathname of the topic.

Gets the name of the subscription.

The name of the subscription.

Gets the messaging factory used to create this subscription client.

The messaging factory used to create this subscription client.

The internal receiver that the client will use for IMessageReceiver operations.

The internal client that the client will use for IMessageBrowser operations.

The internal bool indicating if it is a sub queue or not.

Creates a new copy of with specified name and topic path.

The full pathname of the topic. The name of the subscription. A new copy of .

Creates a new instance of the by using Azure Active Directory authentication context.

Fully qualified domain name for Service Bus. Most likely, {yournamespace}.servicebus.windows.net The full pathname of the topic. The name of the subscription. AuthenticationContext for AAD. The app credential. The receive mode. that specifies how long the messaging operation has to complete before timing out Messaging transport type. The created .

Creates a new instance of the by using Azure Active Directory authentication context.

Fully qualified domain name for Sercvice Bus. Most likely, {yournamespace}.servicebus.windows.net The full pathname of the topic. The name of the subscription. AuthenticationContext for AAD. The client assertion certificate credential. The receive mode. that specifies how long the messaging operation has to complete before timing out Messaging transport type. The created .

Creates a new instance of the by using Azure Active Directory authentication context.

Fully qualified domain name for Service Bus. Most likely, {yournamespace}.servicebus.windows.net The full pathname of the topic. The name of the subscription. AuthenticationContext for AAD. ClientId for AAD. The user password credential. The receive mode. that specifies how long the messaging operation has to complete before timing out Messaging transport type. The created .

Creates a new instance of the by using Azure Active Directory authentication context.

Fully qualified domain name for Service Bus. Most likely, {yournamespace}.servicebus.windows.net The full pathname of the topic. The name of the subscription. AuthenticationContext for AAD. ClientId for AAD. The redrectUri on Client App. Platform parameters User Identifier The receive mode. that specifies how long the messaging operation has to complete before timing out Messaging transport type. The created .

Creates a new instance of the by using Azure Managed Service Identity authentication.

Fully qualified domain name for Service Bus. Most likely, {yournamespace}.servicebus.windows.net The full pathname of the topic. The name of the subscription. The receive mode. that specifies how long the messaging operation has to complete before timing out Messaging transport type. The created .

Creates a new copy of from a connection string with specified topic path and name.

The connection string. The full pathname of the topic. The name of the subscription. A new copy of .

Creates a new copy of with specified name, topic path and mode.

The full pathname of the topic. The name of the subscription. The message receive mode. A new copy of .

Creates a new copy of from a connection string with specified topic path, name and mode.

The connection string. The full pathname of the topic. The name of the subscription. The message receive mode. A new copy of .

Builds a format name subscription path using the specified topic path and subscription name.

The full pathname of the topic. The name of the subscription. The resulted from building the format name subscription path using the specified topic path and subscription name.

Builds a format name deadletter path using the specified topic path and subscription name.

The full pathname of the topic. The name of the subscription. The resulted from building the format name deadletter path using the specified topic path and subscription name.

Registers the handler for the client session.

The type of the handler.

Registers the handler for the client session.

The type of the handler. The session handler options.

Asynchronously registers the handler for the client session.

The type of the handler. The task object representing the asynchronous operation.

Asynchronously registers the handler for the client session.

The type of the handler. The session handler options. The task object representing the asynchronous operation.

Registers the handler factory for the client session.

The interface for the handler factory associated with the message session. The session handler options.

Registers the handler factory for the client session.

The interface for the handler factory associated with the message session. The session handler options.

Asynchronously registers the handler factory for the client session.

The interface for the handler factory associated with the message session. The session handler options. The task object representing the asynchronous operation.

Asynchronously registers the handler factory for the client session.

The interface for the handler factory associated with the message session. The session handler options. The task object representing the asynchronous operation.

Processes a message in an event-driven message pump.

The method to invoke when the operation is complete.

Processes a message in an event-driven message pump, with the given set of options.

The method to invoke when the operation is complete. Specifies the options with which to instantiate the message pump.

Asynchronously processes a message.

The asynchronous method to invoke when the operation is complete.

Asynchronously processes a message.

The asynchronous method to invoke when the operation is complete. The options associated with the message.

Ends a create receiver.

An that references the CreateReceiver. Newly created MessageReceiver.

Accepts a message session that allows grouping of related messages for processing in a single transaction.

A that allows grouping of related messages for processing in a single transaction.

Accepts a message session that allows grouping of related messages for processing in a single transaction using the given session identifier.

The session identifier of the message session. A that allows grouping of related messages for processing in a single transaction. Thrown if sessionId is null, empty, or white spaces. Thrown if the operation exceeded the timeout value set by . Thrown if the client is already closed, aborted, or disposed.

Accepts a message session that allows grouping of related messages for processing in a single transaction using the specified server wait time.

The time span the server waits for processing messages before it times out. A that allows grouping of related messages for processing in a single transaction. Thrown if serverWaitTime is not a positive TimeSpan value. Thrown if the operation exceeded the timeout value set by . Thrown if the client is already closed, aborted, or disposed.

Accepts a message session that allows grouping of related messages for processing in a single transaction using the given session identifier and wait time.

The session identifier of the message session. The time span the server waits for processing messages before it times out. A that allows grouping of related messages for processing in a single transaction. Thrown if sessionId is null, empty, or white spaces. Thrown if serverWaitTime is not a positive TimeSpan value. Thrown if the operation exceeded the timeout value set by . Thrown if the client is already closed, aborted, or disposed.

Asynchronously accepts a message session that allows grouping of related messages for processing in a single transaction using the specified server wait time.

A task instance that represents the asynchronous accept message session operation.

Asynchronously accepts a message session that allows grouping of related messages for processing in a single transaction using the specified server wait time.

The session identifier of the message session. A task instance that represents the asynchronous accept message session operation.

Asynchronously accepts a message session that allows grouping of related messages for processing in a single transaction using the specified server wait time.

The time span the server waits for processing messages before it times out. A task instance that represents the asynchronous accept message session operation.

Asynchronously accepts a message session that allows grouping of related messages for processing in a single transaction using the specified server wait time.

The session identifier of the message session. The time span the server waits for processing messages before it times out. A task instance that represents the asynchronous accept message session operation.

Ends a pending asynchronous accept session receiver.

An that stores state information and any user defined data for this asynchronous operation. Session Receiver object

Gets a message session that allows grouping of related messages for processing in a single transaction.

A message session that allows grouping of related messages for processing in a single transaction.

Retrieves all message sessions whose session state was updated since .

The time the session was last updated. A message session that allows grouping of related messages for processing in a single transaction.

Asynchronously gets a message session that allows grouping of related messages for processing in a single transaction.

A task instance that represents the asynchronous get message sessions operation.

Asynchronously gets a message session that allows grouping of related messages for processing in a single transaction.

The time the session was last updated. A task instance that represents the asynchronous get message sessions operation.

Adds a new rule to the using the specified rule description.

The rule description that provides metadata of the rule to add. Thrown if is null. Thrown if is null, white space empty or not in the right format. Thrown if length has exceeded the limit of 50 characters. Thrown if the operation exceeded the timeout value set by . Thrown if the client entity has been closed or aborted. Thrown if the rule with the same name as already existed for this subscription. Thrown when an attempt is made to add another rule with same name as one that has already been added.

Adds a rule to the current subscription with the specified name and filter expression.

The name of the rule to add. The filter expression against which messages will be matched. Thrown if is null. Thrown if is null, white space empty or not in the right format. Thrown if length has exceeded the limit of 50 characters. Thrown if the operation exceeded the timeout value set via . Thrown if the client entity has been closed or aborted. Thrown if the rule with the same name as already existed for this subscription. Thrown when an attempt is made to add another rule with same name as one that has already been added.

Asynchronously adds a rule to the current subscription with the specified name and filter expression.

The name of the rule to add. The filter expression against which messages will be matched. A task instance that represents the asynchronous add rule operation.

Asynchronously adds a new rule to the using the specified rule description.

The rule description that provides metadata of the rule to add. A task instance that represents the asynchronous add rule operation.

Begins an add rule.

The rule description class. An delegate that references the method to invoke when the operation is complete. A user-defined object that contains information about the receive operation. This object is passed to the EndAddRule delegate when the operation is complete. An that references the asynchronous AddRule.

Ends an add rule.

An that references the AddRule.

Removes the rule described by .

The name of the rule. Thrown if is null, white space empty or not in the right format. Thrown if the operation exceeded the timeout value set via the OperationTimeout Property. Thrown if the client entity has been closed or aborted.

Asynchronously removes the rule described by .

The name of the rule. A task instance that represents the asynchronous remove rule operation.

Gets all the rules which are added to a given Subscription.

List of rules

Asynchronous version of RemoveRule.

Name of the rule. An delegate that references the method to invoke when the operation is complete. A user-defined object that contains information about the receive operation. This object is passed to the EndRemoveRule delegate when the operation is complete. An that references the asynchronous RemoveRule.

Ends a remove rule.

An that references the RemoveRule.

Executes the begin create receiver action.

The message . The wait time before the operation times out. An delegate that references the method to invoke when the operation is complete. A user-defined object that contains information about the receive operation. This object is passed to the delegate when the operation is complete. An that references the asynchronous parent method.

Executes the begin create receiver action.

The path of the subqueue. The name of the subqueue. The message . The wait time before the operation times out. An delegate that references the method to invoke when the operation is complete. A user-defined object that contains information about the receive operation. This object is passed to the delegate when the operation is complete. An that references the asynchronous parent async method.

Executes the end create receiver action.

An object that references the . A newly-created object.

Executes the begin create client action.

The maximum time before this operation times out. An delegate that references the method to invoke when the operation is complete. A user-defined object that contains information about the receive operation. This object is passed to the EndCreateBrowser delegate when the operation is complete. An that references the asynchronous CreateBrowser.

Executes the end create client action.

The result of the asynchronous EndCreateReceiver operation. Message client object

Executes upon calling the BeginAcceptMessageSession operation.

The session identifier of the message session. The receive mode when processing with the receive messages. /// The time span the server waits for processing messages before it times out The time span the server waits for processing messages before it times out. An delegate that references the method to invoke when the operation is complete. A user-defined object that contains state information about the asynchronous operation. An that references the asynchronous operation to accept a message session.

Executes upon calling the EndAcceptMessageSession operation.

An that represents the status of the asynchronous accept message session operation. The that allows grouping of related messages for processing in a single transaction.

Executes upon calling the BeginGetMessageSessions operation.

The time the session was last updated. An delegate that references the method to invoke when the operation is complete. A user-defined object that contains state information about the asynchronous operation. An that references the asynchronous operation to add a new rule to the subscription.

Executes the end get message action.

The result of the message. The end get message action.

Executes upon calling the BeginAddRule operation.

The rule description that provides metadata of the rule to add. The time span this operation waits before it times out. An delegate that references the method to invoke when the operation is complete. A user-defined object that contains state information about the asynchronous operation. An that references the asynchronous operation to add a new rule to the subscription.

Ends the asynchronous call to .

An from a .

Begins removing a from a through the run-time client protocol.

The name of the rule to remove. The wait time before the operation times out. An delegate that references the method to invoke when the operation is complete. A user-defined object that contains information about the receive operation. This object is passed to the delegate when the operation is complete. An that references the asynchronous .

Ends the asynchronous call to .

An from a .

Begins removing a from a through the run-time client protocol using a tag.

The tag to be used. The wait time before the operation times out. An delegate that references the method to invoke when the operation is complete. A user-defined object that contains information about the receive operation. This object is passed to the delegate when the operation is complete. An that references the asynchronous operation to add a new rule to the subscription.

Ends the asynchronous call to .

The result of the asynchronization.

Executes the abort action.

Executes the close action.

The wait time before the operation times out.

Executes the begin close action.

The wait time before the operation times out. An delegate that references the method to invoke when the operation is complete. A user-defined object that contains information about the receive operation. This object is passed to the BeginClose delegate when the operation is complete. An that references the asynchronous BeginClose.

Executes the end close action.

An that references the asynchronous BeginClose.

Gets the message receive mode when processing the received message.

The message when processing the received message.

Gets or sets the number of messages that the message receiver can simultaneously request.

The number of messages that the message receiver can simultaneously request. Takes effect on the next receive call to the server.

Discards the message and relinquishes the message lock ownership.

The lock token bound to the locked message instance to abandon. Thrown if the operation exceeded the timeout value set via . Thrown if the client entity has been closed or aborted. When the client fails to get the message from the queue/topic, this method should be called. Service Bus will increment the delivery count of the message. The client now can either attempt to receive the message again or move it to the dead-letter queue.

Discards the message and relinquishes the message lock ownership.

The lock token bound to the locked message instance to abandon. A collection of property objects to be modified. When the client fails to get the message from the queue/topic, this method should be called. Service Bus will increment the delivery count of the message. The client now can either attempt to receive the message again or move it to the dead-letter queue.

Asynchronously discards the message and relinquishes the message lock ownership.

The lock token bound to the locked message instance to abandon. A task instance that represents the asynchronous abandon operation.

Asynchronously discards the message and relinquishes the message lock ownership.

The lock token bound to the locked message instance to abandon. A collection of property objects to be modified. A task instance that represents the asynchronous abandon operation.

Begins an abandon.

Updates properties on the message being abandoned. The lockToken of the BrokeredMessage. An delegate that references the method to invoke when the operation is complete. A user-defined object that contains information about the receive operation. This object is passed to the EndAbandon delegate when the operation is complete. An that references the asynchronous AcceptMessageSession.

Ends the message abandon operation.

An that references the Abandon.

Completes processing of a message.

The lock token bound to the locked message instance. Thrown if the operation exceeded the timeout value set by . Thrown if the client entity has been closed or aborted. Thrown if the message represented by has lost the message lock. This method is used as a handshake between the client and Service Bus for a guaranteed delivery of the message. If the client failed before calling this method, the message will be kept in the queue.

Asynchronously completes processing of a message.

The lock token bound to the locked message instance. A task instance that represents the asynchronous complete operation.

Completes processing of a batch.

The lock tokens bound to the locked message instance. This method is used as a handshake between the client and Service Bus for a guaranteed delivery of the message. If the client failed before calling this method, the message will be kept in the queue.

Asynchronously completes processing of a batch.

The lock tokens bound to the locked message instance. A task instance that represents the asynchronous complete batch operation.

Begins a complete.

The lockToken of the BrokeredMessage. This is only available when a message is received in peek-lock mode. Lock token is used internally to complete or abandon message. An delegate that references the method to invoke when the operation is complete. A user-defined object that contains information about the receive operation. This object is passed to the delegate when the operation is complete. An that references the asynchronous Complete.

Begins a complete operation for a batch of messages.

The lockTokens of a set of BrokeredMessage objects. This is only available when a message is received in peek-lock mode. Lock token is used internally to complete or abandon message. An delegate that references the method to invoke when the operation is complete. A user-defined object that contains information about the receive operation. This object is passed to the delegate when the operation is complete. An that references the asynchronous Complete.

Ends a complete.

An that references the Complete.

Ends a complete operation for a batch of message lock tokens.

An that references the Complete.

Suspends the processing of a message.

The lock token bound to the locked message instance. Thrown if the operation exceeded the timeout value set by . Thrown if the client entity has been closed or aborted. Thrown if the message represented by has lost the message lock. Before deferring, you should set aside the message receipt for later retrieval.

Suspends the processing of a message.

The lock token bound to the locked message instance. The properties to modify. Before deferring, you should set aside the message receipt for later retrieval.

Asynchronously suspends the processing of a message.

The lock token bound to the locked message instance. A task instance that represents the asynchronous defer operation.

Asynchronously suspends the processing of a message.

The lock token bound to the locked message instance. The properties to modify. A task instance that represents the asynchronous defer operation.

Asynchronous version of Defer method.

Message's lock toekn Updates properties on the message being deferred. An delegate that references the method to invoke when the operation is complete. A user-defined object that contains information about the receive operation. This object is passed to the EndDefer delegate when the operation is complete. An that references the asynchronous Complete.

Ends the message defer operation.

An that references the Complete.

Moves the undelivered message to the dead letter queue.

The lock token bound to the locked message instance. Thrown if the operation exceeded the timeout value set by . Thrown if the client entity has been closed or aborted. Thrown if the message represented by has lost the message lock.

Moves the undelivered message to the dead letter queue.

The lock token bound to the locked message instance. The properties to modify.

Moves the undelivered message to the dead letter queue.

The lock token bound to the locked message instance. The reason for deadlettering the message. The error description for deadlettering the message. Thrown if the operation exceeded the timeout value set by . Thrown if the client entity has been closed or aborted. Thrown if the message represented by has lost the message lock.

Asynchronously moves the undelivered message to the dead letter queue.

The lock token bound to the locked message instance. A task instance that represents the asynchronous deadletter operation.

Asynchronously moves the undelivered message to the dead letter queue.

The lock token bound to the locked message instance. The properties to modify. A task instance that represents the asynchronous deadletter operation.

Asynchronously moves the undelivered message to the dead letter queue.

The lock token bound to the locked message instance. The reason for deadlettering the message. The error description for deadlettering the message. A task instance that represents the asynchronous deadletter operation.

Asynchronous version of DeadLetter method

The message lockToken. Updates properties on the message being deadlettered. An delegate that references the method to invoke when the operation is complete. A user-defined object that contains information about the receive operation. This object is passed to the EndDeadLetter delegate when the operation is complete. An that references the asynchronous Complete.

Asynchronous version of DeadLetter method

The message lockToken. The reason for dead-lettering the message. The description information for dead-lettering the message. An delegate that references the method to invoke when the operation is complete. A user-defined object that contains information about the receive operation. This object is passed to the EndDeadLetter delegate when the operation is complete. An that references the asynchronous Complete.

Ends a move to dead letter queue.

An that references the Complete. Thrown when operation times out

Receives a message using the .

The that represents the received message. Thrown when the subscription does not exist. Thrown if the operation exceeded the timeout value set via . Thrown if the client entity has been closed or aborted. Thrown if there is an authentication error. A Null can be return by this API if operation exceeded the timeout specified, or the operations succeeded but there are no more messages to be received.

Receives a message using the .

The time span the server waits for receiving a message before it times out. The that represents the received message. Thrown if the is negative. Thrown when the subscription does not exist. Thrown if the client entity has been closed or aborted. Thrown if the operation exceeded the timeout value set via . Thrown if there is an authentication error. A Null can be return by this API if operation exceeded the timeout specified, or the operations succeeded but there are no more messages to be received.

Receives a message using the .

The sequence number of the deferred message to receive. The that represents the received message. Thrown if the client entity has been closed or aborted. A Null can be return by this API if operation exceeded the timeout specified, or the operations succeeded but the message with the requested sequenceNumber cannot be located.

Receives a batch after the asynchronous operation.

The number of messages to return in the batch. As this is an approximation, fewer or more messages than may be returned. A batch after the asynchronous operation. A Null can be return by this API if operation exceeded the timeout specified, or the operations succeeded but there are no more messages to be received.

Receives a batch after the asynchronous operation.

The number of messages to return in the batch. As this is an approximation, fewer or more messages than may be returned. The time span the server waits for processing messages. A batch after the asynchronous operation. A Null can be return by this API if operation exceeded the timeout specified, or the operations succeeded but there are no more messages to be received.

Receives a batch after the asynchronous operation.

The sequence number. A batch after the asynchronous operation. A Null can be return by this API if operation exceeded the timeout specified, or the operations succeeded but the message with the requested sequenceNumber cannot be located.

Asynchronously receives a message using the .

A task instance that represents the asynchronous receive operation.

Asynchronously receives a message using the .

The time span the server waits for receiving a message before it times out. A task instance that represents the asynchronous receive operation.

Asynchronously receives a message using the .

The sequence number of the deferred message to receive. A task instance that represents the asynchronous receive operation.

Asynchronously receives a set of messages (for batch processing).

The number of messages to return in the batch. As this is an approximation, fewer or more messages than may be returned. A task instance that represents the asynchronous receive batch operation.

Asynchronously receives a set of messages (for batch processing).

The number of messages to return in the batch. As this is an approximation, fewer or more messages than may be returned. The time span the server waits for processing messages. A task instance that represents the asynchronous receive batch operation.

Asynchronously receives a set of messages (for batch processing).

The sequence number. A task instance that represents the asynchronous receive batch operation.

Asynchronous version of Receive method.

The server wait time before it times out. An delegate that references the method to invoke when the operation is complete. A user-defined object that contains information about the receive operation. This object is passed to the EndReceive delegate when the operation is complete. An that references the asynchronous Complete.

Asynchronous version of ReceiveBatch method.

The number of messages to receive in a batch. The server wait time before it times out. An delegate that references the method to invoke when the operation is complete. A user-defined object that contains information about the receive operation. This object is passed to the EndReceive delegate when the operation is complete. An that references the asynchronous Complete.

Asynchronous version of Receive method.

The sequence number of a message. This is given by Service Bus to a message that user use to reference the message for an entity. An delegate that references the method to invoke when the operation is complete. A user-defined object that contains information about the receive operation. This object is passed to the EndReceive delegate when the operation is complete. An that references the asynchronous Complete.

Asynchronous version of Receive method.

The sequence number of a message. This is given by Service Bus to a message that user use to reference the message for an entity. An delegate that references the method to invoke when the operation is complete. A user-defined object that contains information about the receive operation. This object is passed to the EndReceive delegate when the operation is complete. An that references the asynchronous Complete.

Ends a message receive operation.

An that references the Complete. return the Received BrokeredMessage. A null is return if receive operation cannot obtain the message within . A Null can be return by this API if operation exceeded the timeout specified, or the operations succeeded but there are no more messages to be received.

Ends a receive operation for a batch of messages.

An that references the Complete. return the Received BrokeredMessage. A null is return if receive operation cannot obtain the message within . A Null can be return by this API if operation exceeded the timeout specified, or the operations succeeded but there are no more messages to be received.

Returns without removing the first message in the queue.

The returned message. A Null can be return by this API if operation exceeded the timeout specified, or the operations succeeded but there are no more messages to be received.

Returns without removing the first message in the queue.

The starting point from which to browse a message. The returned message. A Null can be return by this API if operation exceeded the timeout specified, or the operations succeeded but there are no more messages to be received.

Asynchronously returns without removing the first message in the queue.

A task instance that represents the asynchronous peek operation.

Asynchronously returns without removing the first message in the queue.

The starting point from which to browse a message. A task instance that represents the asynchronous peek operation.

Returns without removing the first messages in a batch.

The number of messages in a batch. The collection of first messages in a batch. A Null can be return by this API if operation exceeded the timeout specified, or the operations succeeded but there are no more messages to be received.

Returns without removing the first messages in a batch.

The starting point from which to browse a message. The number of messages in a batch. The collection of first messages in a batch.

Asynchronously returns without removing the first messages in a batch.

The number of messages in a batch. A task instance that represents the asynchronous peek batch operation.

Asynchronously returns without removing the first messages in a batch.

The starting point from which to browse a message. The number of messages in a batch. A task instance that represents the asynchronous peek batch operation.

Asynchronous version of Peek method.

The sequence number of message to start peeking from. An delegate that references the method to invoke when the operation is complete. A user-defined object that contains information about the receive operation. This object is passed to the EndReceive delegate when the operation is complete. An that references the asynchronous Complete.

Asynchronous version of Peek method.

The maximum number of messages to peek. The sequence number of message to start peeking from. An delegate that references the method to invoke when the operation is complete. A user-defined object that contains information about the receive operation. This object is passed to the EndReceive delegate when the operation is complete. An that references the asynchronous Complete.

Ends a message Peek operation.

An that references the Complete. return a list of peeked BrokeredMessages. An empty list is returned if peek operation cannot obtain the message within . A Null can be return by this API if operation exceeded the timeout specified, or the operations succeeded but there are no more messages to be peeked.

Ends a message Peek operation.

An that references the Complete. return a peeked BrokeredMessage. A null is returned if peek operation cannot obtain the message within . A Null can be return by this API if operation exceeded the timeout specified, or the operations succeeded but there are no more messages to be peeked.

Represents a description of the subscription.

The message time to live default value

Initializes a new instance of the class.

The topic path. The subscription name.

Gets or sets the lock duration time span for the subscription.

The lock duration time span for the subscription.

Gets or sets the value indicating if a subscription supports the concept of session.

true if the receiver application can only receive from the queue through a ; false if a queue cannot receive using .

Gets or sets the default message time to live value. This is the duration after which the message expires, starting from when the message is sent to the Service Bus. This is the default value used when is not set on a message itself.Messages older than their TimeToLive value will expire and no longer be retained in the message store. Subscribers will be unable to receive expired messages.A message can have a lower TimeToLive value than that specified here, but by default TimeToLive is set to . Therefore, this property becomes the default time to live value applied to messages.

The default message time to live for a subscription.

Gets or sets the idle interval after which the subscription is automatically deleted. The minimum duration is 5 minutes.

The auto delete on idle time span for the subscription.

Gets or sets the value that indicates if a subscription has dead letter support when a message expires.

true if a subscription has dead letter support when a message expires; otherwise, false.

Gets or sets the value that indicates if a subscription has dead letter support on Filter evaluation exceptions.

true if a subscription has dead letter support on Filter evaluation exceptions; otherwise, false.

Gets the number of messages.

The number of messages.

Gets message details about the subscription.

Returns with the number of active messages, dead letters, scheduled messages, messages transferred to other queues, subscriptions, or topics, and the number of messages transferred to the dead letter queue.

Gets the path of the topic that this subscription description belongs to.

The path of the topic that this subscription description belongs to. This is a relative path to the .

Gets the name of the subscription description.

The name of the subscription description.

Gets or sets the number of maximum deliveries.

The number of maximum deliveries.

Gets or sets a value that indicates whether the batched operations are enabled.

true if the batched operations are enabled; otherwise, false.

Gets the name of the collection.

The name of the collection.

Gets or sets the current status of the subscription (enabled or disabled). When an entity is disabled, that entity cannot send or receive messages.

The current status of the subscription.

Gets the entity availability status for the messaging.

The entity availability status for the messaging.

Gets or sets the path to the recipient to which the message is forwarded.

The path to the recipient to which the message is forwarded.

Gets or sets the path to the recipient to which the dead lettered messages are forwarded.

The path to the recipient to which the dead lettered messages are forwarded.

Gets the exact time the message was created.

The time the message was created.

Gets the exact time the message has been updated.

The time the message has been updated.

Gets the last time a there was a receive request to this subscription.

The last time a there was a receive request to this subscription.

Gets or sets the user metadata.

The user metadata.

Represents the metadata and approximate runtime information for a logical partition of an Event Hub.

Initializes a new instance of the class.

The path of the Event Hub. The partition identifier.

Gets the partition ID for the Event Hub to which it belongs.

The partition identifier.

Gets the path of the Event Hub.

The path of the Event Hub. This is a relative path to the .

Gets the name of the Event Hubs consumer group.

The Event Hubs consumer group.

Gets the end sequence number.

The end sequence number.

Gets the begin sequence number.

The begin sequence number.

Gets the approximate size, in bytes, of the Event Hubs partition.

Returns .

Gets the approximate incoming rate of events (in bytes per second) for the partition.

Returns .

Gets the approximate outgoing rate (in bytes per second) for the partition in the specified consumer group.

Returns .

Gets the offset of the last enqueued event.

The offset of the last enqueued event.

Gets the enqueued UTC time of the last event.

The enqueued time of the last event.

Gets the name of the collection.

The name of the collection.

Gets the LastCheckpoint of the partition.

This class contains properties that enable you to retrieve details of messages from sub-queues of primary messaging entities (queues, topics, subscriptions).

Initializes a new instance of the class.

Initializes a new instance of the class with the number of active messages, dead letters, scheduled messages, messages transferred to other queues, subscriptions, or topics, and the number of messages transferred to the dead letter queue.

The number of active messages. The number of dead letters. The number of scheduled messages. The number of messages transferred to other queues, subscriptions, or topics. The number of messages transferred to the dead letter queue.

Gets or sets the number of active messages in the queue, topic, or subscription.

Returns that specifies the number of active messages.

Gets or sets the number of messages that are dead letters.

Returns that specifies the number of messages that are dead letters.

Gets or sets the number scheduled messages.

Returns the number of scheduled messages.

Gets or sets the number of messages transferred to another queue, topic, or subscription.

Returns that specifies the number of messages transferred to another queue, topic, or subscription

Gets or sets the number messages transferred into dead letters.

Returns that specifies the number messages transferred into dead letters.

This method assumes type != null.

Represents the unit of communication between Service Bus clients.

The message flags

The message version

Initializes a new instance of the class.

Initializes a new instance of the class from a given object by using DataContractSerializer with a binary XmlDictionaryWriter.

The object to be serialized into the message body. A default is used for serializing the object.

Constructor that creates a BrokeredMessage from a given object using the provided XmlObjectSerializer

You should be aware of the exceptions that their provided Serializer can throw and take appropriate actions. Please refer to for a possible list of exceptions and their cause. The serializable object. The serializer object. Thrown when null serializer is passed to the method with a non-null serializableObject

Initializes a new instance of the class.

The message body stream.

Initializes a new instance of the class using the supplied stream as its body.

The message body stream. true to indicate that the stream will be closed when the message is closed; false to indicate that the stream will not be closed when the message is closed.

Creates the message.

The header stream. The body stream. .

Gets or sets the identifier of the correlation.

The identifier of the correlation. Thrown if the message is in disposed state.

Gets or sets the identifier of the session.

The identifier of the session. Thrown if the message is in disposed state.

Gets or sets the the Publisher.

Identifies the Publisher Sending the Message. Thrown if message is in disposed state. Thrown if or are set to different values.

Gets or sets the session identifier to reply to.

The session identifier to reply to. Thrown if the message is in disposed state.

Gets the number of deliveries.

The number of deliveries. Thrown if the message is in disposed state. Thrown if the message has not been delivered by ServiceBus.

Gets the date and time in UTC at which the message is set to expire.

The message expiration time in UTC. Thrown if the message is in disposed state. If the message has not been delivered by ServerBus.

This property is used on the Broker side only when we perform a deep group search for sessionful messages. in those cases we only do a partial message fetch, and so this property is used to store the ExpiredAtUtc in that scenario. This property is also being set during Send to identify the effective message TTL

Gets the date and time in UTC until which the message will be locked in the queue/subscription.

The date and time until which the message will be locked in the queue/subscription. Thrown if the message is in disposed state. Thrown if the message was not received from the ServiceBus.

Gets the lock token assigned by Service Bus to this message.

The lock token assigned by Service Bus to this message. Thrown if the message is in disposed state. Thrown if the message was not received from the ServiceBus.

Gets or sets the identifier of the message. This is a user-defined value that Service Bus can use to identify duplicate messages, if enabled.

The identifier of the message. Thrown if the message is in a disposed state. Thrown if the message identifier is null or exceeds 128 characters in length.

Gets or sets a context for the receive.

The receive context.

Gets or sets the type of the content.

The type of the content of the message body. This is a content type identifier utilized by the sender and receiver for application specific logic. Thrown if the message is in disposed state.

Gets or sets a partition key for sending a transactional message to a queue or topic that is not session-aware.

The partition key for sending a transactional message.

Gets or sets a partition key value when a transaction is to be used to send messages via a transfer queue.

The partition key value when a transaction is to be used to send messages via a transfer queue.

Gets or sets the application specific label.

The application specific label. Thrown if the message is in disposed state.

Gets or sets the destination.

The destination.

Gets the application specific message properties.

The size of each property object within the Properties bag cannot exceed 32 kilobytes. The collective size of the Properties bag cannot exceed 64 kilobytes. The application specific message properties. Thrown if the message is in disposed state.

Gets or sets the address of the queue to reply to.

The reply to queue address. Thrown if the message is in disposed state.

Gets or sets the date and time of the sent time in UTC.

The enqueue time in UTC. This value represents the actual time of enqueuing the message. Thrown if the message is in disposed state.

Gets or sets the date and time in UTC at which the message will be enqueued. This property returns the time in UTC; when setting the property, the supplied DateTime value must also be in UTC.

The scheduled enqueue time in UTC. This value is for delayed message sending. It is utilized to delay messages sending to a specific time in the future. Message enquing time does not mean that the message will be sent at the same time. It will get enqueued, but the actual sending time depends on the queue's workload and its state. Thrown if the message is in disposed state. Thrown if the passed in value is DateTime.MaxValue.

Gets the unique number assigned to a message by the Service Bus.

The unique number assigned to a message by the Service Bus. Thrown if the message is in disposed state. Thrown if the message was not received from the message server.

Gets or sets the enqueued sequence number of the message.

The enqueued sequence number of the message.

Gets the size of the message in bytes.

The message size in bytes. The value of Size is only accurate after the BrokeredMessage instance is sent or received. Thrown if the message is in disposed state.

Gets the size of the message header in bytes.

The size of the message header. Thrown if message is in disposed state

Gets or sets the state of the message.

The state of the message.

Gets or sets the message’s time to live value. This is the duration after which the message expires, starting from when the message is sent to the Service Bus. Messages older than their TimeToLive value will expire and no longer be retained in the message store. Subscribers will be unable to receive expired messages.TimeToLive is the maximum lifetime that a message can receive, but its value cannot exceed the entity specified the value on the destination queue or subscription. If a lower TimeToLive value is specified, it will be applied to the individual message. However, a larger value specified on the message will be overridden by the entity’s DefaultMessageTimeToLive value.

The message’s time to live value. If the TTL set on a message by the sender exceeds the destination's TTL, then the message's TTL will be overwritten by the later one. See , and to learn more about how to control message TTL at an entity level. Thrown if the message is in disposed state. Thrown if the passed in value is less than or equal to TimeSpan.Zero.

Gets or sets the send to address.

The send to address. Thrown if the message is in disposed state.

Specifies whether the message has been consumed.

true if the message has been consumed; otherwise, false.

Gets or sets a value that indicates whether the message is to be persisted to the database immediately, instead of being held in memory for a short time. This property is ignored if the message is sent to a non-express queue or topic.

true if the message is to be persisted to the database immediately, instead of being held in memory for a short time; otherwise, false.

Gets or sets the flag for whether the message is a scheduled message that's being activated.

The boolean value

Gets or sets the body stream.

The message body stream. Thrown if message is in disposed state

Gets or sets the initialized members.

The initialized members.

Gets a value indicating whether this object is lock token set.

true if this object is lock token set, false if not.

Gets or sets a value indicating whether this object is body loaded.

true if this object is body loaded, false if not.

Gets the identifier of the body.

The identifier of the body.

Gets or sets the InternalId.

The InternalId.

Gets or sets the PrefilteredHeaders.

The prefiltered message headers.

Gets or sets the PrefilteredProperties.

The prefiltered message properties.

Gets or sets the state.

The state.

Gets or sets the subqueue type.

The subqueue type.

EventHub only property.

Gets or sets a value indicating the persisted size of the message in the store

the persisted message size The header size of the message changes as it travels through the various layers which can affect quota calculation. To avoid this we need a consistent message size property.

Gets the internal properties.

The internal properties.

Gets or sets a value indicating whether the message came from cache or not.

true if came from cache, false if not. Used in Tests only

Indicate if the BorkeredMessage has been accessed (or marked) as consumed.

Initially IsConsumed is false. First read of this property will also marked the IsConsumed to be true (atomically). Subsequence will be false. Also note that this does not take transaction into account, so if a message is marked as consumed but then transaction is aborted, this property will continue to indicate false.

Creates the empty message.

.

Deserializes the brokered message body into an object of the specified type by using the with a binary .

The type to which the message body will be deserialized. The deserialized object or graph. If the message is in disposed state or the message body stream is already disposed. If the message contains a null body stream or the body stream contains no data or the message body has already been consumed.

Deserializes the BrokeredMessage body into an object of the specified type using DataContractSerializer with a Binary XmlObjectSerializer.

Generic type parameter. The serializer object. The deserialized object/graph Thrown if the message is in disposed state. Thrown when invoked with a Null serializer object. Thrown if the message contains a Null body stream, contains no data, or if the stream has been read once (through any GetBody() calls).

Abandons the lock on a peek-locked message.

This operation should only be exercised on a message received in peek-lock mode. Thrown when the message is in the disposed state or the receiver with which the message was received is in disposed state. Thrown when invoked on a message that has not been received from the message server or invoked on a message that has not been received in peek-lock mode. Thrown when operation times out. The timeout period is initialized through the . You may need to increase the value of to avoid this exception if the timeout value is relatively low. Thrown when the queue or subscription that receives the message is no longer present in the message server. When service bus service is busy and is unable process the request. When messaging entity the message was received from has been deleted. When the lock associated with this message was lost or the lock token was not found. When this message was received from a Session and the lock associated with the session was lost. When the security token provided by the TokenProvider does not contain the claims to perform this operation. When the number of concurrent connections to an entity exceed the maximum allowed value.

Abandons the lock on a peek-locked message.

The key-value pair collection of properties to modify. This operation should only be exercised on a message received in peek-lock mode. Thrown when message is in disposed state. the receiver with which the messsage was received is in disposed state Thrown when invoked on a message that has not been received from the message server. invoked on a message that has not been received in peek-lock mode Thrown when operation times out. Timeout period is initialized through the . You may need to increase the value of to avoid this exception if timeout value is relatively low. Thrown when the queue or subscription that the message was received from is no longer present in the message server.

Asynchronously abandons the lock on a peek-locked message.

The asynchronous result of the operation.

Asynchronously abandons the lock on a peek-locked message.

The key-value pair collection of properties to modify. The asynchronous result of the operation.

Begins an asynchronous operation to abandon the lock on a peek-locked message.

An delegate that references the method to invoke when the operation is complete. A user-defined object that contains information about the receive operation. This object is passed to the delegate when the operation is complete. An that references the asynchronous request to abandon the lock on a peek-locked message. Thrown when message is in disposed state. the receiver with which the messsage was received is in disposed state Thrown when invoked on a message that has not been received from the message server.

Begins an asynchronous operation to abandon the lock on a peek-locked message.

updates properties on the message being abandoned. An delegate that references the method to invoke when the operation is complete. A user-defined object that contains information about the receive operation. This object is passed to the delegate when the operation is complete. An that references the asynchronous request to abandon the lock on a peek-locked message. Thrown when message is in disposed state. the receiver with which the messsage was received is in disposed state Thrown when invoked on a message that has not been received from the message server.

Ends an asynchronous request to abandon the lock on a peek-locked message.

An that references the . Thrown if an incorrect IAsyncResult is provided. The IAsyncResult object passed to 'End' must be the one returned from the matching 'Begin' or passed to the callback provided to 'Begin'. Thrown if invoked with a Null result. Thrown when operation times out. Timeout period is initialized through the . You may need to increase the value of to avoid this exception if timeout value is relatively low. Thrown when the queue or subscription that the message was received from is no longer present in the message server. Thrown when invoked on a message that has not been received in peek-lock mode

Renews the lock on a message.

If is true, you can retry the operation immediately. You can retry the operation immediately. Thrown if you have called too late. In a session, this is never thrown. Thrown instead of if the message is from a .

Asynchronously renews the lock on a message.

The asynchronous result of the operation.

Completes the receive operation of a message and indicates that the message should be marked as processed and deleted.

This method is used as a handshake between the receiver and Service Bus for a guaranteed delivery of the message. If the receiver failed before calling this method, the message will be kept in the queue. Thrown when the message is in disposed state or the receiver with which the message was received is in disposed state. Thrown when invoked on a message that has not been received from the message server or invoked on a message that has not been received in peek-lock mode. Thrown when the queue or subscription that receives the message is no longer present in the message server. Thrown when the operation times out. The timeout period is initialized through the . You may need to increase the value of to avoid this exception if the timeout value is relatively low. Thrown if the lock on the message has expired. LockDuration is an entity-wide setting and can be initialized through and for queues and subscriptions respectively. Thrown if the lock on the session has expired. The session lock duration is the same as the message LockDuration and is an entity-wide setting. It can be initialized through and for queues and subscriptions respectively. When service bus service is busy and is unable process the request. When messaging entity the message was received from has been deleted. When the security token provided by the TokenProvider does not contain the claims to perform this operation. When the number of concurrent connections to an entity exceed the maximum allowed value.

Asynchronously completes the receive operation of a message and indicates that the message should be marked as processed and deleted.

The asynchronous result of the operation.

Begins an asynchronous operation to complete a message

An delegate that references the method to invoke when the operation is complete. A user-defined object that contains information about the receive operation. This object is passed to the delegate when the operation is complete. An that references the asynchronous request to complete a message. Thrown when message is in disposed state. the receiver with which the messsage was received is in disposed state Thrown when invoked on a message that has not been received from the message server.

Ends an asynchronous operation to complete a message.

An that references the Complete. Thrown if an incorrect IAsyncResult is provided. The IAsyncResult object passed to 'End' must be the one returned from the matching 'Begin' or passed to the callback provided to 'Begin'. Thrown if invoked with a Null result. Thrown when the queue or subscription that the message was received from is no longer present in the message server. Thrown when operation times out. Timeout period is initialized through the . You may need to increase the value of to avoid this exception if timeout value is relatively low. Thrown if the lock on the message has expired. LockDuration is an entity wide setting and can be initialized through and for Queues and Subscriptions respectively. Thrown if the lock on the session has expired. Session lock durations are same as messge LockDuration and is an entity wide setting. It can be initialized throgh and for Queues and Subscriptions respectively. Thrown when invoked on a message that has not been received in peek-lock mode.

Indicates that the receiver wants to defer the processing for this message.

Before deferring the message, user MUST set aside the message receipt for later retrieval. Thrown when the message is in the disposed state or the receiver with which the message was received is in the disposed state. Thrown when invoked on a message that has not been received from the message server or invoked on a message that has not been received in peek-lock mode. Thrown when the queue or subscription that receives the message is no longer present in the message server. Thrown when the operation times out. The timeout period is initialized through the . You may need to increase the value of to avoid this exception if the timeout value is relatively low. Thrown if the lock on the message has expired. LockDuration is an entity-wide setting and can be initialized through and for queues and subscriptions respectively. Thrown if the lock on the session has expired. The session lock duration is the same as the message LockDuration and is an entity-wide setting. It can be initialized through and for queues and subscriptions respectively. When service bus service is busy and is unable process the request. When messaging entity the message was received from has been deleted. When the security token provided by the TokenProvider does not contain the claims to perform this operation. When the number of concurrent connections to an entity exceed the maximum allowed value.

Indicates that the receiver wants to defer the processing for this message.

Before deferring the message, user MUST set aside the message receipt for later retrieval. The key-value pair collection of properties to modify.

Asynchronously indicates that the receiver wants to defer the processing for this message.

The asynchronous result of the operation.

Asynchronously indicates that the receiver wants to defer the processing for this message.

The key-value pair collection of properties to modify. The asynchronous result of the operation.

Begins an asynchronous operation to defer a message.

An delegate that references the method to invoke when the operation is complete. A user-defined object that contains information about the receive operation. This object is passed to the delegate when the operation is complete. An that references the asynchronous request to defer a message. Thrown when message is in disposed state. the receiver with which the messsage was received is in disposed state Thrown when invoked on a message that has not been received from the message server.

Begins an asynchronous operation to defer a message.

updates properties on the message being deadlettered. An delegate that references the method to invoke when the operation is complete. A user-defined object that contains information about the receive operation. This object is passed to the delegate when the operation is complete. An that references the asynchronous request to defer a message. Thrown when message is in disposed state. the receiver with which the messsage was received is in disposed state Thrown when invoked on a message that has not been received from the message server.

Begins a defer.

The timeout. The callback. The state. .

Ends an asynchronous request to defer a message.

An that references the Defer. Thrown if an incorrect IAsyncResult is provided. The IAsyncResult object passed to 'End' must be the one returned from the matching 'Begin' or passed to the callback provided to 'Begin'. Thrown if invoked with a Null result. Thrown when the queue or subscription that the message was received from is no longer present in the message server. Thrown when operation times out. Timeout period is initialized through the . You may need to increase the value of to avoid this exception if timeout value is relatively low. Thrown if the lock on the message has expired. LockDuration is an entity wide setting and can be initialized through and for Queues and Subscriptions respectively. Thrown if the lock on the session has expired. Session lock durations are same as messge LockDuration and is an entity wide setting. It can be initiailized throgh and for Queues and Subscriptions respectively. Thrown when invoked on a message that has not been received in peek-lock mode.

Moves the message to the dead letter queue.

The reason for deadlettering the message. The description information for deadlettering the message. Thrown when the message is in disposed state or the receiver with which the message was received is in disposed state. Thrown when invoked on a message that has not been received from the message server or invoked on a message that has not been received in peek-lock mode. Thrown when the queue or subscription that receives the message is no longer present in the message server. Thrown when operation times out. Timeout period is initialized through the . You may need to increase the value of to avoid this exception if timeout value is relatively low. Thrown if the lock on the message has expired. LockDuration is an entity-wide setting and can be initialized through and for Queues and Subscriptions respectively. Thrown if the lock on the session has expired. Session lock duration is the same as message LockDuration and is an entity-wide setting. It can be initialized through and for Queues and Subscriptions respectively.

Asynchronously moves the message to the dead letter queue.

The asynchronous result of the operation.

Asynchronously moves the message to the dead letter queue.

The reason for deadlettering the message. The description information for deadlettering the message. The asynchronous result of the operation.

Asynchronously moves the message to the dead letter queue.

The key-value pair collection of properties to modify. The asynchronous result of the operation.

Moves the message to the dead letter queue.

The key-value pair collection of properties to modify.

Moves the message to the dead letter queue.

Thrown when the message is in disposed state or the receiver with which the message was received is in disposed state. Thrown when invoked on a message that has not been received from the message server or invoked on a message that has not been received in peek-lock mode.

Begins an asynchronous operation to move the message to the dead letter queue.

An delegate that references the method to invoke when the operation is complete. A user-defined object that contains information about the receive operation. This object is passed to the EndDeadLetter delegate when the operation is complete. An that references the asynchronous request to dead letter the message. Thrown when message is in disposed state. the receiver with which the messsage was received is in disposed state Thrown when invoked on a message that has not been received from the message server.

Begins an asynchronous operation to move the message to the dead letter queue.

The reason for deadlettering the message. The description information for deadlettering the message. An delegate that references the method to invoke when the operation is complete. A user-defined object that contains information about the receive operation. This object is passed to the EndDeadLetter delegate when the operation is complete. An that references the asynchronous request to dead letter the message. Thrown when message is in disposed state. the receiver with which the messsage was received is in disposed state Thrown when invoked on a message that has not been received from the message server.

Begins an asynchronous operation to move the message to the dead letter queue.

updates properties on the message being deadlettered. An delegate that references the method to invoke when the operation is complete. A user-defined object that contains information about the receive operation. This object is passed to the EndDeadLetter delegate when the operation is complete. An that references the asynchronous request to dead letter the message. Thrown when message is in disposed state. the receiver with which the messsage was received is in disposed state Thrown when invoked on a message that has not been received from the message server.

Ends an asynchronous request to move the message to the dead letter queue.

An that references the asynchronous request to dead letter the message. Thrown if an incorrect IAsyncResult is provided. The IAsyncResult object passed to 'End' must be the one returned from the matching 'Begin' or passed to the callback provided to 'Begin'. Thrown if invoked with a Null result. Thrown when the queue or subscription that the message was received from is no longer present in the message server. Thrown when operation times out. Timeout period is initialized through the . You may need to increase the value of to avoid this exception if timeout value is relatively low. Thrown if the lock on the message has expired. LockDuration is an entity wide setting and can be initialized through and for Queues and Subscriptions respectively. Thrown if the lock on the session has expired. Session lock durations are same as messge LockDuration and is an entity wide setting. It can be initiailized throgh and for Queues and Subscriptions respectively. Thrown when invoked on a message that has not been received in peek-lock mode.

Performs application-defined tasks associated with freeing, releasing, or resetting unmanaged resources.

Returns a string that represents the current message.

The string representation of the current message.

Validate message identifier.

Thrown when messageId is null, or empty or greater than the maximum message length. Identifier for the message.

Validate session identifier.

Thrown when sessionId is greater than the maximum session ID length. Identifier for the session.

This method is reserved and should not be used. When implementing the IXmlSerializable interface, you should return null (Nothing in Visual Basic) from this method, and instead, if specifying a custom schema is required, apply the XmlSchemaProviderAttribute to the class.

An XmlSchema that describes the XML representation of the object that is produced by the WriteXml method and consumed by the ReadXml method.

Generates an object from its XML representation. This method is reserved for internal use and should not be used directly or indirectly (for example, using a serializer or a formatter).

The XmlReader stream from which the object is deserialized.

Converts an object into its XML representation. This method is reserved for internal use and should not be used directly or indirectly (e.g. using a serializer or a formatter).

The XmlWriter stream to which the object is serialized.

Clones a message, so that it is possible to send a clone of a message as a new message.

The that contains the cloned message.

Creates a message copy.

Message describing the original. .

Creates the copy.

.

Gets a header stream.

Manager for buffer. The header stream.

Performs application-defined tasks associated with freeing, releasing, or resetting unmanaged resources.

true if resources should be disposed, false if not.

Deserialize body stream.

Thrown when as error. The message. The stream from which the object is deserialized. return the size of the body stream in bytes

Deserialize headers from binary.

The message. The stream from which the object is deserialized.

Deserialize properties from binary.

The message. The stream from which the object is deserialized.

Reads the bytes.

Thrown when as error. The stream from which the object is deserialized. The bytes to read. The bytes.

Serialize body stream.

Thrown when as error. The message. The stream to which the object is serialized.

Serialize headers as binary.

Thrown when as error. The message. The stream to which the object is serialized.

Serialize properties as binary.

Thrown when as error. The message. The stream to which the object is serialized.

Copies the message headers described by originalMessage.

Message describing the original. specific if it is a client side initialized code path.

Ensures that header deserialized.

Ensures that receiver headers.

Gets the header count.

The header count.

Throw if not locked.

Thrown when as error.

Throw if receive context is null.

Thrown when as error.

Throw if disposed.

Thrown when object disposed.

Throw if not received.

Thrown when as error.

Binary serialization item.

Gets or sets the extractor.

The extractor.

Gets or sets the identifier of the field.

The identifier of the field.

Gets or sets the should serialize.

The should serialize.

Gets the serialized size in bytes (maybe an estimate).

Receiver headers.

Gets or sets the number of deliveries.

The number of deliveries.

Gets or sets the Date/Time of the locked until utc.

The locked until utc.

Gets or sets the lock token.

The lock token.

Gets or sets the sequence number.

The sequence number.

Gets or sets the enqueued sequence number.

The Enqueued sequence number.

The MessagingFactory class is the anchor class used for run time operations to send and receive to and from queues, topics, or subscriptions.

string Address = "sb://myapp.WindowsAzure.com/"; //base address of namespace you are connecting to. MessagingFactorySettings MsgFactorySettings = new MessagingFactorySettings(); //specify operating timeout (optional) MessagingFactory MsgFactory = MessagingFactory.Create(Address, MsgFactorySettings); Please note that any member method with CreateXXXClient, such as CreateQueueClient, does not create a new entity in the namespace. It only gets handle to an existing entity created earlier using the . If these entities does not exist in the namespace, you will get an exception.

Gets the base address of the messaging factory.

A URI that represents the base address of the messaging factory.

Gets a list of namespace endpoints.

A list of namespace endpoints.

Gets or sets the number of messages that the message receiver can simultaneously request.

The number of messages that the message receiver can simultaneously request. Takes effect on the next acceptmessagesession call to the server

Gets the operation timeout.

The operation timeout.

Creates a new messaging factory object.

The newly created object.

Creates a new object from a connection string.

The connection string. The newly created object.

Creates a new object.

The base address of the service namespace. The newly created object.

Creates a new object.

An enumeration of base addresses. The newly created object.

Creates a new object.

The namespace base address. The newly created object.

Creates a new object.

An enumeration of address. The newly created object.

Creates a new object.

The base address of the namespace. The token provider. The newly created object. contains a path appended to the full address of the service namespace. Thrown when is empty. Thrown when or are null.

Creates a new object.

An enumeration of base addresses. The token provider. The newly created object.

Creates a new object.

The base address of the namespace. The token provider. The newly created object. contains a path appended to the full address of the service namespace. Thrown when or are null.

Creates a new object.

An enumeration of address. The token provider. The newly created object.

Creates a new object.

The base address of the service namespace. The settings. The newly created object. Thrown when is empty. Thrown when or are null. contains a path appended to the full address of the service namespace.

Creates a new object.

An enumeration of base addresses. The factory settings. The newly created object.

Creates a new object.

The namespace base address. The settings. The newly created object. Thrown when or is null. contains a path appended to the full address of the service namespace.

Creates a new object.

An enumeration of address. The factory settings. The newly created object.

Asynchronously creates a new messaging factory object.

The base address of the service namespace. A task instance that represents the asynchronous create operation.

Asynchronously creates a new messaging factory object.

An enumeration of base addresses. A task instance that represents the asynchronous create operation.

Asynchronously creates a new messaging factory object.

The namespace base address. A task instance that represents the asynchronous create operation.

Asynchronously creates a new messaging factory object.

An enumeration of address. A task instance that represents the asynchronous create operation.

Asynchronously creates a new messaging factory object.

The base address of the service namespace. The token provider. A task instance that represents the asynchronous create operation.

Asynchronously creates a new messaging factory object.

An enumeration of base addresses. The token provider. A task instance that represents the asynchronous create operation.

Asynchronously creates a new messaging factory object.

The namespace base address. The token provider. A task instance that represents the asynchronous create operation.

Asynchronously creates a new messaging factory object.

An enumeration of address. The token provider. A task instance that represents the asynchronous create operation.

Asynchronously creates a new messaging factory object.

The base address of the service namespace. The settings. A task instance that represents the asynchronous create operation.

Asynchronously creates a new messaging factory object.

An enumeration of base addresses. The settings. A task instance that represents the asynchronous create operation.

Asynchronously creates a new messaging factory object.

The namespace base address. The settings. A task instance that represents the asynchronous create operation.

Asynchronously creates a new messaging factory object.

An enumeration of address. The settings. A task instance that represents the asynchronous create operation.

Ends asynchronous request of create a MessagingFactory object.

An that references the create a MessagingFactory. Newly created MessagingFactory.

Creates a new queue client.

The path of the queue relative to the service namespace base address. The newly created queue client. is null or empty. length is greater than . The operation times out. The timeout period is initialized through the object. You may need to increase the value of to avoid this exception if the timeout value is relatively low. An internal error or unexpected exception occurs. The factory has been closed or aborted.

Creates a new queue client.

The path of the queue relative to the service namespace base address. The receive mode. The newly created queue client. is null or empty. length is greater than . The operation times out. The timeout period is initialized through the object. You may need to increase the value of to avoid this exception if the timeout value is relatively low. An internal error or unexpected exception occurs. The factory has been closed or aborted.

Creates a new object using the specified path.

The path to the Event Hub. The newly created object. Thrown if is null.

Creates a new topic client.

The topic path relative to the service namespace base address. The newly created topic client. The supplied is null. The operation times out. The timeout period is initialized through the object. You may need to increase the value of to avoid this exception if the timeout value is relatively low. An internal error or unexpected exception occurs. The factory has been closed or aborted.

Creates a subscription client.

The topic path relative to the service namespace. The name of the subscription. The newly created subscription client. The supplied is null or empty. The length of is greater than . The operation times out. The timeout period is initialized through the object. You may need to increase the value of to avoid this exception if the timeout value is relatively low. An internal error or unexpected exception occurs. The factory has been closed or aborted.

Creates a new subscription client.

The topic path relative to the service namespace. The name of the subscription. The receive mode. The newly created subscription client. The supplied is null or empty. The length of is greater than . The operation times out. The timeout period is initialized through the object. You may need to increase the value of to avoid this exception if the timeout value is relatively low. An internal error or unexpected exception occurs. The factory has been closed or aborted.

Retrieves a copy of the settings of the messaging factory.

A copy of the messaging factory settings.

Asynchronously pairs a namespace.

The pairing options. The result of the operation.

Executes the create queue client action.

The path of the queue relative to the service namespace base address. The receive mode. The newly created queue client.

Executes the create topic client action.

The path of the topic relative to the service namespace base address. The newly created topic client.

Executes the create event hub client action.

The path of the event hub client. The created .

Executes a create subscription client action.

The path of the subscription relative to the service namespace base address. The name of the subscription. The receive mode. A newly created subscription client.

Executes a create subscription client action.

The subscription path. The receive mode. A newly created subscription client.

Creates a message receiver.

The path of the entity. The newly created message receiver.

Creates a message receiver.

The path of the entity. The receive mode. The newly created message receiver.

Creates a message receiver.

Name of the entity. The receive mode. The timeout. .

Asynchronously creates a message receiver.

The path of the entity. A task instance that represents the asynchronous create message receiver operation.

Asynchronously creates a message receiver.

The path of the entity. The receive mode. A task instance that represents the asynchronous create message receiver operation.

Begins a create message receiver.

Name of the entity. The receive mode. The timeout. The callback. The state. .

Ends a create message receiver.

The result. .

Begins an accept session receiver.

Name of the entity. Id of the session. The receive mode. The server wait time before it times out. The timeout for the operation. The callback. The state. .

Ends an accept message session.

The result. .

Accept session receiver.

Name of the entity. Id of the session. The receive mode. .

Accept session receiver.

Name of the entity. Id of the session. The receive mode. The server wait time for an available session. The timeout .

Returns available sessions across all session-enabled subscriptions and queues in the service namespace.

A that allows grouping of related messages for processing in a single transaction.

Returns available sessions across all session-enabled subscriptions and queues in the service namespace.

The processing time out. A that allows grouping of related messages for processing in a single transaction.

Asynchronously returns available sessions across all session-enabled subscriptions and queues in the service namespace.

A task instance that represents the asynchronous operation for accept message session.

Asynchronously returns available sessions across all session-enabled subscriptions and queues in the service namespace.

The processing time out. A task instance that represents the asynchronous operation for accept message session.

Creates a message sender.

The path of the entity. The newly created message sender.

Creates a message sender.

Name of the entity. The timeout. .

Creates a message sender.

The transfer destination entity path. The via-entity path. The created object.

Creates a message sender.

Name of the destination entity. Name of the via entity. The timeout. .

Asynchronously creates a message sender.

The path of the entity. A task instance that represents the asynchronous create message sender operation.

Asynchronously creates a message sender.

The transfer destination entity path. The via-entity path. A task instance that represents the asynchronous create message sender operation.

Ends a create message sender.

The result. .

Executes the begin create message receiver action.

The name of the entity. The message receive mode. The wait time before the operation times out. An delegate that references the method to invoke when the operation is complete. A user-defined object that contains information about the receive operation. An object that references the asynchronous create message receiver action.

Executes the end create message receiver action.

The result. The executed action.

Executes the create message receiver action.

The name of the entity. The message receive mode. The timeout. An object that references the asynchronous create message receiver action.

Executes the begin accept session receiver action.

The name of the entity. The session identifier. The message receive mode. The wait time before the operation times out. An delegate that references the method to invoke when the operation is complete. A user-defined object that contains information about the receive operation. An object that references the asynchronous accept session receiver action.

Executes the end accept session receiver action.

An object that stores state information and any user-defined data for this asynchronous operation. The executed object.

Executes the begin accept message session action.

The receive mode. The server wait time. The operation timeout. The asynchronous callback. The session state. The asynchronous result of the operation.

Executes the end accept message session action.

The result of the operation. The executed action.

Executes the accept message session.

The message receive mode. The server wait time. The operation timeout. The executed message session.

Executes the accept session receiver action.

The name of the entity. The session identifier. The message receive mode. The wait time before the operation times out. An object that references the asynchronous accept session receiver action.

Executes the begin create message sender action.

The name of the entity. The timeout. The callback. The state. An object that references the asynchronous create message sender action.

Executes the begin create message sender action.

The name of the transfer destination entity. The via-entity name. The timeout. The callback message. The state. An object that references the asynchronous create message sender action.

Executes the end create message sender action.

The result. The executed action.

Executes the create message sender action.

The name of the entity. The timeout. An object that references the asynchronous create message sender action.

Executes the create message sender action.

The name of the transfer destination entity. The via-entity name. The message timeout. The executed action.

Executes the abort action.

Executes the close action.

The timeout.

Executes the begin close action.

The timeout. The callback. The state. An object that references the asynchronous close action.

Executes the end close action.

The result.

Create message sender asynchronous result.

Constructor.

The factory. Name of the entity. Name of the transfer destination entity. If possible, should the returned sender also attempt pairing. The timeout. The callback. The state.

Gets or sets the sender.

The sender.

Gets the asynchronous steps.

The asynchronous steps.

Create message receiver asynchronous result.

Constructor.

The factory. Name of the entity. The receive mode. The timeout. The callback. The state.

Gets or sets the receiver.

The receiver.

Gets the asynchronous steps.

The asynchronous steps.

Accept message session asynchronous result.

Constructor.

The factory. Name of the entity. Id of the session. The receive mode. The server wait time for a session to be available. The time out The callback. The state.

Gets or sets the group receiver.

The group receiver.

Gets the asynchronous steps.

The asynchronous steps.

Create messaging factory asynchronous result.

Constructor.

Options for controlling the operation. The addresses. The callback. The state.

Ends.

The result. .

Creates a complete.

The result. true if it succeeds, false if it fails.

The MessageReceiver class is used to receive messages from the message container and acknowledge them.

Please note that message delivery mechanism does not provide by default all time reliable message receiving. Service Bus deletes the message once it goes out of the system. For a guaranteed delivery, you can use the PeekLock delivery mode. //******************************************************************************** // Sending messages to a Queue //******************************************************************************** // Create a sender MessageSender myMessageSender = myQueueClient.CreateSender(SendMode.Default); // Send messages List<string> Issues = new List<string>(); foreach (var issue in Issues) { myMessageSender.Send(new BrokeredMessage(issue)); } //******************************************************************************** // Recieving messages from a Queue //******************************************************************************** // Create a receiver MessageReceiver myMessageReceiver = myQueueClient.CreateReceiver(ReceiveMode.PeekLock); // Receive messages for (int count = 0; count < Issues.Count; count++) { var message = myMessageReceiver.Receive(); message.Complete(); } //******************************************************************************** // Receiving messages from a particular session //******************************************************************************** // Create subscription client SubscriptionClient mySubscriptionClient = factory.CreateSubscriptionClient(mySubscription); // Create a receiver MessageReceiver myMessageReceiver = mySubscriptionClient.AcceptMessageSession(ReceiveMode.PeekLock); // Receive messages for (int count = 0; count *lt; Issues.Count; count++) { var message = myMessageReceiver.Receive(); message.Complete(); }

Gets the batch flush interval.

The batch flush interval. The default value is 20 ms. You can set the value of it via SbmpTransportSetting.BatchFlushInterval

Gets or sets the sequence number of the message last peeked.

The sequence number of the message last peeked.

Gets the message receive mode.

The message receive mode.

Gets a value indicating whether the batching is enabled.

true if batching is enabled; otherwise, false.

Gets or sets the number of messages that the message receiver can simultaneously request.

The number of messages that the message receiver can simultaneously request. Takes effect on the next receive call to the server.

Gets or sets the identifier of a receiver which was set during the creation of the receiver.

A string representing the identifier of a receiver. It will return null if the identifier is not set.

Processes a message in an event-driven message pump.

The method to invoke when the operation is complete. Specifies the options with which to instantiate the message pump.

Asynchronously processes a message in an event-driven message pump.

The method to invoke when the operation is complete. Specifies the options with which to instantiate the message pump.

Discards the message and relinquishes the message lock ownership.

The lock token bound to the locked message instance to abandon. When the message receiver fails to get the message from the queue/topic, this method should be called. The Service Bus will increment the delivery count of the message. The message receiver now can either attempt to receive the message again or move it to the dead-letter queue.

Discards the message and relinquishes the message lock ownership.

The lock token. The properties to modify.

Asynchronously discards the message and relinquishes the message lock ownership.

The lock token bound to the locked message instance to abandon. The asynchronous operation.

Asynchronously discards the message and relinquishes the message lock ownership.

The lock token. The properties to modify. The asynchronous operation.

Begins an abandon.

The lockToken of the BrokeredMessage. An delegate that references the method to invoke when the operation is complete. A user-defined object that contains information about the receive operation. This object is passed to the EndAbandon delegate when the operation is complete. An that references the asynchronous AcceptMessageSession.

Ends the message abandon operation.

An that references the Abandon.

Completes the receive operation on a message. If using AMQP, this operation can only be performed on messages that were received by this receiver.

The lock token of the . This is only available when a message is received in peek-lock mode. The lock token is used internally to complete or abandon a message. This method is used as a handshake between the receiver and Service Bus for a guaranteed delivery of the message. If the receiver failed before calling this method, the message will be kept in the queue.

Asynchronously completes the receive operation on a message. If using AMQP, this operation can only be performed on messages that were received by this receiver.

The lock token. The asynchronous operation.

Completes the receive operation on a batch of message. If using AMQP, this operation can only be performed on messages that were received by this receiver.

The lock tokens.

Asynchronously completes the receive operation on a batch of message. If using AMQP, this operation can only be performed on messages that were received by this receiver.

The lock tokens. The asynchronous operation.

Begins a complete.

The lockToken of the BrokeredMessage. This is only available when a message is received in peek-lock mode. Lock token is used internally to complete or abandon message. An delegate that references the method to invoke when the operation is complete. A user-defined object that contains information about the receive operation. This object is passed to the delegate when the operation is complete. An that references the asynchronous Complete.

Begins a complete.

The lockTokens of the BrokeredMessage objects. This is only available when a message is received in peek-lock mode. Lock token is used internally to complete or abandon message. An delegate that references the method to invoke when the operation is complete. A user-defined object that contains information about the receive operation. This object is passed to the delegate when the operation is complete. An that references the asynchronous Complete.

Ends a complete.

An that references the Complete.

Ends a complete.

An that references the Complete.

Indicates that the receiver wants to defer the processing for the message.

The lock token of the . This is only available when a message is received in peek-lock mode. The lock token is used internally to complete or abandon a message. Receive context is null. Before deferring user should set aside the message receipt for later retrieval.

Indicates that the receiver wants to defer the processing for the message.

The lock token. The properties to modify.

Asynchronously defer the processing of the message.

The lock token. The asynchronous operation.

Asynchronously defer the processing of the message.

The lock token. The properties to modify. The asynchronous operation.

Asynchronous version of Defer method.

Message's lock toekn An delegate that references the method to invoke when the operation is complete. A user-defined object that contains information about the receive operation. This object is passed to the EndDefer delegate when the operation is complete. An that references the asynchronous Complete.

Ends the message defer operation.

An that references the Complete.

Asynchronous version of Receive method.

An delegate that references the method to invoke when the operation is complete. A user-defined object that contains information about the receive operation. This object is passed to the EndReceive delegate when the operation is complete. An that references the asynchronous Complete.

Asynchronous version of ReceiveBatch method.

The number of messages to fetch An delegate that references the method to invoke when the operation is complete. A user-defined object that contains information about the receive operation. This object is passed to the EndReceive delegate when the operation is complete. An that references the asynchronous Complete.

Asynchronous version of Receive method.

The server wait time before it times out. An delegate that references the method to invoke when the operation is complete. A user-defined object that contains information about the receive operation. This object is passed to the EndReceive delegate when the operation is complete. An that references the asynchronous Complete.

Asynchronous version of ReceiveBatch method.

The number of messages to fetch The server wait time before it times out. An delegate that references the method to invoke when the operation is complete. A user-defined object that contains information about the receive operation. This object is passed to the EndReceive delegate when the operation is complete. An that references the asynchronous Complete.

Asynchronous version of Receive method.

The sequence number of a message. This is given by Service Bus to a message that user use to reference the message for an entity. An delegate that references the method to invoke when the operation is complete. A user-defined object that contains information about the receive operation. This object is passed to the EndReceive delegate when the operation is complete. An that references the asynchronous Complete.

Ends a message receive operation.

An that references the Complete. return the Received BrokeredMessage. A null is return if receive operation cannot obtain the message within . A Null can be return by this API if operation exceeded the timeout specified, or the operations succeeded but there are no more messages to be received.

Receives a from the current queue or topic.

The that represents the received message. A Null can be returned by this API if operation exceeded the timeout specified, or the operations succeeded but there are no more messages to be received.

Receives a batch of messages.

The number of messages to return in the batch. As this is an approximation, fewer or more messages than may be returned. A batch of messages. A Null can be return by this API if operation exceeded the timeout specified, or the operations succeeded but there are no more messages to be received.

Receives a from the current queue or topic.

The time span the server waits before the operation times out. The that represents the received message. A Null can be returned by this API if operation exceeded the timeout specified, or the operations succeeded but there are no more messages to be received.

Receives a batch of messages.

The number of messages to return in the batch. As this is an approximation, fewer or more messages than may be returned. The server wait time. A batch of messages. A Null can be returned by this API if operation exceeded the timeout specified, or the operations succeeded but there are no more messages to be received.

Receives a message from the current queue or topic.

The sequence number of the message to receive. The that represents the received message. A Null can be returned by this API if operation exceeded the timeout specified, or the operations succeeded but the message with the requested sequenceNumber cannot be located.

Asynchronously receives a message from the current queue or topic.

The asynchronous operation.

Asynchronously receives a message from the current queue or topic.

The time span the server waits before the operation times out. The asynchronous operation.

Asynchronously receives a message from the current queue or topic.

The sequence number of the message to receive. The asynchronous operation.

Receives a batch of messages.

The sequence numbers. A batch of messages. A Null can be returned by this API if operation exceeded the timeout specified, or the operations succeeded but the message with the requested sequenceNumber cannot be located.

Asynchronously receives a batch of messages.

The number of messages to return in the batch. As this is an approximation, fewer or more messages than may be returned. The asynchronous operation.

Asynchronously receives a batch of messages.

The number of messages to return in the batch. As this is an approximation, fewer or more messages than may be returned. The server wait time. The asynchronous operation.

Asynchronously receives a batch of messages.

The sequence numbers. The asynchronous operation.

Moves the undelivered message to the dead letter queue.

The lock token bound to the locked message instance. The properties to modify.

Moves the undelivered message to the dead letter queue.

The lock token bound to the locked message instance. The reason for deadlettering the message. The error description for deadlettering the message.

Moves the undelivered message to the dead letter queue.

The lock token bound to the locked message instance.

Asynchronously moves the undelivered message to the dead letter queue.

The lock token bound to the locked message instance. The asynchronous operation.

Asynchronously moves the undelivered message to the dead letter queue.

The lock token bound to the locked message instance. The properties to modify. The asynchronous operation.

Asynchronously moves the undelivered message to the dead letter queue.

The lock token bound to the locked message instance. The reason for deadlettering the message. The error description for deadlettering the message. The asynchronous operation.

Asynchronous version of DeadLetter method

The message lockToken. An delegate that references the method to invoke when the operation is complete. A user-defined object that contains information about the receive operation. This object is passed to the EndDeadLetter delegate when the operation is complete. An that references the asynchronous Complete.

Asynchronous version of DeadLetter method

The message lockToken. The reason for deadlettering the message. The description information for deadlettering the message. An delegate that references the method to invoke when the operation is complete. A user-defined object that contains information about the receive operation. This object is passed to the EndDeadLetter delegate when the operation is complete. An that references the asynchronous Complete.

Ends a move to dead letter queue.

An that references the Complete. Thrown when operation times out

Try receive.

The serverWaitTime. [out] The message. true if it succeeds, false if it fails. This API can have the following outcome: return true with message != null - a message was received. return false with message == null - a timeout has occurred. return true with message == null - a call was successful but there are no more message to received.

Gets the lock token bound to the message.

The from which to get the lock token. The lock token of the message.

Gets the collection of lock tokens from the specified collection of messages.

The collection of messages from which to get the lock tokens. The collection of lock tokens from the specified messages.

Executes the begin try receive action.

TrackingContext to use. Number of messages. The server wait time before it times out. The callback. The state. .

Executes the end try receive action.

The result. The received message collection. true if it succeeds; false if it fails.

Executes upon calling the OnTryReceive or BeginTryReceive operation for the event data.

An that references the asynchronous operation to try to receive event data. The context information associated by a transaction tracking this operation. The number of messages to try receiving. The time span the operation waits before it times out. An delegate that references the method to invoke when the operation is complete. A user-defined object that contains state information about the asynchronous operation.

Executes the EndTryReceive action for the event data.

The result. The received message collection. true if it succeeds; false if it fails.

Executes the begin try receive action.

TrackingContext to use. Number of messages. The server wait time before it times out. The callback. The state. .

Executes the end try receive action.

The result. The received message collection. true if it succeeds; false if it fails.

Executes the try receive action.

TrackingContext to use. Number of messages. The server wait time before it times out. [out] The messages. true if it succeeds, false if it fails.

Executes the begin try receive action.

TrackingContext to use. The sequenceNumbers. The timeout. The callback. The state. .

Executes the try receive action.

TrackingContext to use. The receipts. The timeout. [out] The messages. true if it succeeds, false if it fails.

Executes upon calling the OnDefer or BeginDefer operation.

An that references the asynchronous operation to suspend processing of messages. The context information associated by a transaction tracking this operation. The collection of lock tokens bound to the locked message instances. The properties to modify. The start of synchronization. The time span the operation waits before it times out. An delegate that references the method to invoke when the operation is complete. A user-defined object that contains state information about the asynchronous operation.

Executes the end defer action.

The result.

Executes the defer action.

TrackingContext to use. The lock tokens. The timeout.

Executes upon calling the OnDeadLetter or BeginDeadLetter operation.

An that references the asynchronous operation to move undelivered of messages to the deadletter queue. The context information associated by a transaction tracking this operation. The collection of lock tokens bound to the locked message instances. The properties to modify. The reason for deadlettering the messages. The error description for deadlettering the messages. The start of the synchronization. The time span the operation waits before it times out. An delegate that references the method to invoke when the operation is complete. A user-defined object that contains state information about the asynchronous operation.

Executes the end move to dead letter queue action.

An object that references the asynchronously completed operation.

Executes the move to dead letter queue action.

TrackingContext to use. The reason for deadlettering the message. The description information for deadlettering the message. The lock tokens. The timeout.

Executes upon calling the OnBegin operation for lock messages.

An that references the asynchronous operation to renew processing of lock messages. The context information associated by a transaction tracking this operation. The collection of lock tokens bound to the locked message instances. The start of the synchronization. The time span the operation waits before it times out. An delegate that references the method to invoke when the operation is complete. A user-defined object that contains state information about the asynchronous operation.

Executes the EndRenew action for message locks.

The result of the operation. A of lock messages.

Executes the Renew action for lock messages.

The renewed lock messages. The tracking context. The lock tokens. The time span the operation waits before it times out.

Executes upon calling the OnComplete or BeginComplete operation.

An that references the asynchronous operation to complete receiving of messages. The context information associated by a transaction tracking this operation. The collection of lock tokens bound to the locked message instances. The start of the synchronization. The time span the operation waits before it times out. An delegate that references the method to invoke when the operation is complete. A user-defined object that contains state information about the asynchronous operation.

Executes upon calling the OnComplete or BeginComplete operation.

An that references the asynchronous operation to complete receiving of messages. The context information associated by a transaction tracking this operation. A collection of delivery tags. The start of the synchronization. The time span the operation waits before it times out. An delegate that references the method to invoke when the operation is complete. A user-defined object that contains state information about the asynchronous operation.

Executes the end complete action.

The result.

Executes the complete action.

TrackingContext to use. The lock tokens. The timeout.

Executes upon calling the OnAbandon or BeginAbandon operation.

An that references the asynchronous operation to abandon the messages and relinquish its lock. The context information associated by a transaction tracking this operation. The collection of lock tokens bound to the locked message instances. The properties to modify. The start of the synchronization. The time span the operation waits before it times out. An delegate that references the method to invoke when the operation is complete. A user-defined object that contains state information about the asynchronous operation.

Executes the end abandon action.

The result.

Executes the abandon action.

TrackingContext to use. The lock tokens. The timeout.

Executes the create peek lock context action.

The message. .

Increment continuous error count

Reset continuous error count

Gets a top message.

The messages. The top message.

Sets a peek lock context.

The messages.

Reads the next message without changing the state of the receiver or the message source.

The that represents the next message to be read.

Reads the next message without changing the state of the receiver or the message source.

The sequence number from where to read the message. The that represents the next message to be read.

Asynchronously reads the next message without changing the state of the receiver or the message source.

The asynchronous operation.

Asynchronously reads the next message without changing the state of the receiver or the message source.

The sequence number from where to read the message. The asynchronous operation.

Reads the next batch of message without changing the state of the receiver or the message source.

The number of message. The batch of message to be read.

Reads the next batch of message without changing the state of the receiver or the message source.

The sequence number from where to read a batch message. The number of message. The batch of message to be read.

Asynchronously reads the next batch of message without changing the state of the receiver or the message source.

The number of message. The asynchronous operation.

Asynchronously reads the next batch of message without changing the state of the receiver or the message source.

The sequence number from where to read a batch message. The number of message. The asynchronous operation.

Ends the message Peek operation.

An that references the Complete.

Ends the message Peek operation.

An that references the Complete.

Executes upon calling the BeginPeek operation.

The result of the operation. The context information associated by a transaction tracking this operation. The sequence number from where to begin the operation. The number of message. The time span the operation waits before it times out. An delegate that references the method to invoke when the operation is complete. A user-defined object that contains state information about the asynchronous operation.

Executes the EndPeek operation.

The result of the operation. A list of messages.

Executes upon calling the Peek operation.

The messages peeked. The tracking context. The sequence number from where to peek. The number of message. The time span the operation waits before it times out.

The MessageSender class is used to send messages from the Service Bus.

Please note that message delivery mechanism does not provide by default all time reliable message receiving. Service Bus deletes the message once it goes out of the system. For a guaranteed delivery, you can use the PeekLock delivery mode. //******************************************************************************** // Sending messages to a Queue //******************************************************************************** // Create a sender MessageSender myMessageSender = myQueueClient.CreateSender(SendMode.Default); // Send messages List<object> Issues = new List<object>(); foreach (var issue in Issues) { myMessageSender.Send(new BrokeredMessage(issue)); } //******************************************************************************** // Recieving messages from a Queue //******************************************************************************** // Create a receiver MessageReceiver myMessageReceiver = myQueueClient.CreateReceiver(ReceiveMode.PeekLock); // Receive messages for (int count = 0; count < Issues.Count; count++) { var message = myMessageReceiver.Receive(); message.Complete(); }

Gets the batch flush interval.

A batch flush interval. The default value is 20 ms. Thrown when the is in closing, closed, or faulted state.

Gets a value indicating whether the batching is enabled.

true if batching is enabled; otherwise, false.

Sends the specified brokered message.

The brokered message to send. Thrown when operation times out. Timeout period is initialized through the . You may need to increase the value of to avoid this exception if the timeout value is relatively low. Thrown when is null.

Asynchronously sends the specified brokered message.

The brokered message to send. The asynchronous result of the operation.

Sends a set of brokered messages (for batch processing).

The collection of brokered messages to send.

Asynchronously sends a set of brokered messages (for batch processing).

The collection of brokered messages to send. The asynchronous result of the operation.

Begins an asynchronous request to send a BrokeredMessage.

The BrokeredMessag. An delegate that references the method to invoke when the operation is complete. A user-defined object that contains information about the receive operation. This object is passed to the delegate when the operation is complete. An that references the asynchronous create a queue. Thrown when operation times out. Timeout period is initialized through the . You may need to increase the value of to avoid this exception if timeout value is relatively low. Thrown when the BrokeredMessage is null.

Ends an asynchronous request to send a message.

An that references the send method.

Ends an asynchronous request to send a batch of messages.

An that references the send method.

Executes the begin send action. This method is intended for internal consumption and cannot be implemented in a concrete class by the user.

Executes the end send action. This method is intended for internal consumption and cannot be implemented in a concrete class by the user.

Executes the begin send event data action. This method is intended for internal consumption and cannot be implemented in a concrete class by the user.

Executes the end send event data action. This method is intended for internal consumption and cannot be implemented in a concrete class by the user.

The result of the operation.

This allows concrete implementations to override (if needed) what should be done when sending in a synchronous manner.

TrackingContext to use. A list of to be sent. A client side timeout value for the operation. The operation should be aborted or cancel if the duration exceeded this timeout. Typically the timeout comes from . OnSend is equal to this.OnEndSend(this.OnBeginSend(messages, timeout, null, null));.

This allows concrete implementations to override (if needed) what should be done to schedule sends

Tracking context to use. Messages to be scheduled. A client side timeout value for the operation. The operation should be aborted or cancel if the duration exceeded this timeout. A user callback to be invoked when the operation completes. The state to be passed to the callback when the operation completes. a for the operation.

Raises an event when ending the message schedule.

The result of the operation. The result of the operation.

This allows concrete implementations to override (if needed) what should be done to cancel scheduled sends

Tracking context to use. Sequence Number of the message to cancelled. A client side timeout value for the operation. The operation should be aborted or cancel if the duration exceeded this timeout. A user callback to be invoked when the operation completes. The state to be passed to the callback when the operation completes. a for the operation.

Raises an event when ending the cancellation of the scheduled message.

The result of the operation.

Represents the exception that is thrown for signaling messaging errors.

Initializes a new instance of the class with a specified error message.

The error message that explains the reason for the exception.

Initializes a new instance of the class with a specified error message and a reference to the inner exception that is the cause of this exception.

The error message that explains the reason for the exception. The exception that is the cause of the current exception.

Initializes a new instance of the class.

The error message that explains the reason for the exception. true if the exception is transient; otherwise, false. The exception that is the cause of the current exception.

Initializes a new instance of the class with a specified error message.

The error message that explains the reason for the exception. The TrackingContext. The exception that is the cause of the current exception.

Constructor.

Detail about the cause of the exception. The TrackingContext.

Constructor.

Detail about the cause of the exception. The TrackingContext. The inner exception.

Initializes a new instance of the class with serialization information and streaming context.

The serialization information. The streaming context.

Gets or sets the detail information of the messaging exception.

The detail information of the messaging exception.

an id that may be used to track the exception in traces

Gets or sets the time at which the messaging exception occurred.

The time at which the messaging exception occurred.

Gets or sets a value indicating whether the exception is transient. Check this property to determine if the operation should be retried.

true if the exception is transient; otherwise, false.

Populates the serialization information with data about the exception.

The serialized object data about the exception being thrown. The contextual information about the source or destinations.

Gets the data associated with the exception.

The data associated with the exception.

Closes an ICommunicationObject asynchronously without waiting. Never throws any exception.

Closes an ClientEntity asynchronously without waiting. Never throws any exception.

Create a list of uri addresses from a given list of string addresses

This constructor is used by Broker since Broker will not have MessageReceiver available to them.

Enumerates the values for the receive mode. The default is .

Specifies the PeekLock receive mode. This is the default value for .

Specifies the ReceiveAndDelete receive mode.

An anchor class used to access a to perform run-time operations.

// Create settings for the MessagingFactory (for rutime operations) MessagingFactorySettings factorySettings = new MessagingFactorySettings() { NetMessagingTransportSettings = new NetMessagingTransportSettings(), Credential = TransportClientCredentialBase.CreateSharedSecretCredential(IssuerName, IssuerKey), }; // Create the MessagingFactory MessagingFactory factory = MessagingFactory.Create(myServiceBusNamespace, factorySettings); //******************************************************************************** // Sending messages to a Topic //******************************************************************************** // Create topic client TopicClient myTopicClient = factory.CreateTopicClient(myTopic); // Create a sender //MessageSender myMessageSender = myTopicClient.CreateSender(SendMode.Default); // Send messages List <object> Issues = new List <object>(); foreach (var issue in Issues) { myMessageSender.Send(new BrokeredMessage(issue)); }

Gets or sets the messaging factory that was used in creating this object.

The messaging factory that was used in creating this object.

The internal sender that the client will use for IMessageSender operations.

Gets or sets a value that indicates whether the message receiver is created from a subqueue.

true if the message receiver is created from a subqueue; otherwise, false.

The internal client that the client will use for IMessageBrowser operations.

Creates a new instance of .

The path. The created . This method will attempt to retrieve the connection string information from either app.config, or web.config files. User must supply the connection string using the "AppSettings" section of the configuration. The format of the section is as follows:

Creates a new instance of the by using Azure Active Directory authentication context.

Fully qualified domain name for Service Bus. Most likely, {yournamespace}.servicebus.windows.net The path to the topic. AuthenticationContext for AAD. The app credential. that specifies how long the messaging operation has to complete before timing out Messaging transport type. The created .

Creates a new instance of the by using Azure Active Directory authentication context.

Fully qualified domain name for Sercvice Bus. Most likely, {yournamespace}.servicebus.windows.net The path to the topic. AuthenticationContext for AAD. The client assertion certificate credential. that specifies how long the messaging operation has to complete before timing out Messaging transport type. The created .

Creates a new instance of the by using Azure Active Directory authentication context.

Fully qualified domain name for Service Bus. Most likely, {yournamespace}.servicebus.windows.net The path to the topic. AuthenticationContext for AAD. ClientId for AAD. The user password credential. that specifies how long the messaging operation has to complete before timing out Messaging transport type. The created .

Creates a new instance of the by using Azure Active Directory authentication context.

Fully qualified domain name for Service Bus. Most likely, {yournamespace}.servicebus.windows.net The path to the topic. AuthenticationContext for AAD. ClientId for AAD. The redrectUri on Client App. Platform parameters User Identifier that specifies how long the messaging operation has to complete before timing out Messaging transport type. The created .

Creates a new instance of the by using Azure Managed Service Identity authentication.

Fully qualified domain name for Service Bus. Most likely, {yournamespace}.servicebus.windows.net The path to the topic. that specifies how long the messaging operation has to complete before timing out Messaging transport type. The created .

Creates a new instance of using the specified connection string and path to the topic. Use this overload only when the connection string does not use the property.

The connection string to use. The path. The created . Thrown when the format of the parameters is incorrect. This method should only be used with a connection string that has namespace level authentication because the connection string supplied should not have entity level information associated with it.

Creates a new instance of using the specified connection string.

The connection string to use. Returns . This method expects the connection string supplied has entity level information such as the entity path and authentication information supplied.

A utility method that, given the topic path and subscription name, forms a full path that points to the dead letter queue of the topic's transfer topic.

The topic path. Returns a representing a full path that points to the dead letter queue of the transfer topic of the specified topic. This path can be used in receiver creation or in URI formation (such as a REST URI).

Executes the begin create sender action.

The wait time before the operation times out. An delegate that references the method to invoke when the operation is complete. A user-defined object that contains information about the receive operation. This object is passed to the when the operation is complete. An that references the asynchronous parent method.

Executes the end create sender action.

An that references the asynchronous parent method. The newly created object.

Executes the abort action.

Executes the close action.

The wait time before the operation times out.

Executes the begin close action.

The wait time before the operation times out. An delegate that references the method to invoke when the operation is complete. A user-defined object that contains information about the receive operation. This object is passed to the EndClose delegate when the operation is complete. An that references the asynchronous Close operation.

Executes the end close action.

An that references the asynchronous Close operation.

Sends a message using the .

The message to send. Thrown when operation times out. Timeout period is initialized through the to avoid this exception if timeout value is relatively low. Thrown when the is null. Thrown if the has already been sent by a or once already. Thrown if the client entity has been closed or aborted. Thrown if there is an I/O or security error. Thrown when an error occurs during serialization or deserialization. Thrown if the topic does not exist. Thrown if there is a messaging error.

Asynchronously sends a message using the .

The message to send. The asynchronous result of the operation.

Sends a set of brokered messages (for batch processing).

The messages to send.

Asynchronously sends a set of brokered messages (for batch processing).

The messages to send. The asynchronous result of the operation.

Begins an asynchronous request to send a BrokeredMessage.

The BrokeredMessage to send. An delegate that references the method to invoke when the operation is complete. A user-defined object that contains information about the receive operation. This object is passed to the delegate when the operation is complete. An that references the asynchronous create a queue. Thrown when operation times out. Timeout period is initialized through the . You may need to increase the value of to avoid this exception if timeout value is relatively low. Thrown when the BrokeredMessage is null.

Begins an asynchronous request to send a batch of BrokeredMessage.

The list of BrokeredMessage objects to send. An delegate that references the method to invoke when the operation is complete. A user-defined object that contains information about the receive operation. This object is passed to the delegate when the operation is complete. An that references the asynchronous create a queue. Thrown when operation times out. Timeout period is initialized through the . You may need to increase the value of to avoid this exception if timeout value is relatively low. Thrown when the BrokeredMessage is null.

Ends an asynchronous request to send a message.

An that references the send method.

Ends an asynchronous request to send a batch of messages.

An that references the send method.

Peeks a BrokeredMessage from current queue/topic.

return the peeked BrokeredMessage. A null is return if peek operation cannot obtain the message within . A Null can be return by this API if operation exceeded the timeout specified, or the operations succeeded but there are no more messages to be received.

Peeks a BrokeredMessage from current queue/topic.

The sequence number of message to start peeking from. return the peeked BrokeredMessage. A null is return if peek operation cannot obtain the message within . A Null can be return by this API if operation exceeded the timeout specified, or the operations succeeded but there are no more messages to be received.

Peeks a BrokeredMessage from current queue/topic.

The maximum number of messages to peek. return a list of peeked BrokeredMessages. An empty list is returned if peek operation cannot obtain the message within . A Null can be return by this API if operation exceeded the timeout specified, or the operations succeeded but there are no more messages to be received.

Asynchronous version of Peek method.

The sequence number of message to start peeking from. An delegate that references the method to invoke when the operation is complete. A user-defined object that contains information about the receive operation. This object is passed to the EndReceive delegate when the operation is complete. An that references the asynchronous Complete.

Asynchronous version of Peek method.

The maximum number of messages to peek. The sequence number of message to start peeking from. An delegate that references the method to invoke when the operation is complete. A user-defined object that contains information about the receive operation. This object is passed to the EndReceive delegate when the operation is complete. An that references the asynchronous Complete.

Ends a message Peek operation.

An that references the Complete. return a list of peeked BrokeredMessages. An empty list is returned if peek operation cannot obtain the message within . A Null can be return by this API if operation exceeded the timeout specified, or the operations succeeded but there are no more messages to be peeked.

Ends a message Peek operation.

An that references the Complete. return a peeked BrokeredMessage. A null is returned if peek operation cannot obtain the message within . A Null can be return by this API if operation exceeded the timeout specified, or the operations succeeded but there are no more messages to be peeked.

Executes the begin create client action.

The maximum time before this operation times out. An delegate that references the method to invoke when the operation is complete. A user-defined object that contains information about the receive operation. This object is passed to the EndCreateBrowser delegate when the operation is complete. An that references the asynchronous CreateBrowser.

Executes the end create client action.

The result of the asynchronous EndCreateReceiver operation. Message client object

Sends a scheduled message

Message to be scheduled Time of enqueue Sequence number that is needed for cancelling.

Cancels a scheduled message

Returned on scheduling a message.

Represents a description of the topic.

The message time to live default value

Initializes a new instance of the class with the specified relative path.

The path of the topic relative to the service namespace base address.

Gets or sets the default message time to live value for a topic. This is the duration after which the message expires, starting from when the message is sent to the Service Bus. This is the default value used when is not set on a message itself.Messages older than their TimeToLive value will expire and no longer be retained in the message store. Subscribers will be unable to receive expired messages.

The default message time to live for a topic.

Gets or sets the idle interval after which the topic is automatically deleted. The minimum duration is 5 minutes.

The auto delete on idle time span for the topic.

Gets or sets the maximum size of the topic in megabytes, which is the size of memory allocated for the topic.

The maximum size in megabytes.

Gets or sets the value that indicates whether a topic requires duplication detection.

true if a topic requires duplication detection; otherwise, false.

Gets or sets the structure that defines the duration of the duplicate detection history.

The structure that defines the duration of the duplicate detection history.

Gets the size of the topic in bytes.

The size of the topic in bytes.

Gets the path of the topic.

The path of the topic. This is a relative path to the .

Gets or sets a value that indicates whether server-side batched operations are enabled.

true if the batched operations are enabled; otherwise, false.

Gets or sets the support ordering method.

The support ordering method.

Gets or sets whether messages should be filtered before publishing.

true if message filtering is enabled before publishing; otherwise, false. This feature is recommended to be used only for development and testing purposes. For example, when new Rules or Filters are being added to the topic, this feature can be used to verify that the new filter expression is working as expected. Once tested and working fine, the feature should be turned off in production. Thrown if the subscriptions do not match.

Gets whether anonymous access is allowed.

true if anonymous access is allowed; otherwise, false.

Gets the name of the collection.

The name of the collection.

Gets the authorization rules for the description.

The authorization rules for the description.

Gets or sets the current status of the topic (enabled or disabled). When an entity is disabled, that entity cannot send or receive messages.

The status of the topic.

Gets the status of the availability of this instance.

The status of the availability of this instance.

Gets the time and date when the topic was created.

The time and date when the topic was created.

Gets the time and date when the topic was updated.

The time and date when the topic was updated.

Gets the time and date at which a message was last sent to the topic.

The time and date at which a message was last sent to the topic.

Gets message details about the topic.

The that contains the number of active messages, dead letters, scheduled messages, messages transferred to other queues, subscriptions, or topics, and the number of messages transferred to the dead letter queue.

Gets or sets the user metadata associated with the description.

The user metadata associated with the description.

Gets then number of subscriptions.

An that represents the number of subscriptions.

Gets or sets whether to enable the topic to be partitioned across multiple message brokers. An express topic holds a message in memory temporarily before writing it to persistent storage.

true to enable the topic to be partitioned across multiple message brokers; otherwise, false.

Gets or sets whether partitioning is enabled or disabled.

Gets or sets a value that indicates whether Express Entities are enabled. An express topic holds a message in memory temporarily before writing it to persistent storage.

true if the Express Entities are enabled; otherwise, false.

New name

Specifies the type of entities the namespace can contain (messaging, Event Hubs, or notification hubs).

Specifies that the namespace should contain messaging entities (queues, topics, or subscriptions).

Specifies that the namespace should contain notification hubs.

Supported only for backward compatibility. Specifies that the namespace can contain a mixture of messaging entities and notification hubs.

Specifies that the namespace should contain Event Hubs.

Specifies that the namespace should contain Relays and Hybrid Connections.

Enumerates the types of portal resource.

Specifies a namespace resource.

Specifies a queue resource.

Specifies a topic resource.

Specifies a notification hub resource.

Represents the address for the portal management.

Gets or sets the portal address.

The portal address.

Provides SKU for the messaging.

Gets or sets the stock-keeping unit for the messaging.

The stock-keeping unit for the messaging.

Gets or sets the description for stock-keeping unit.

The description for stock-keeping unit.

Gets or sets the minimum allowed event hub unit.

The minimum allowed event hub unit.

Represents a messaging SKU plan.

Gets or sets the stock-keeping unit.

The stock-keeping unit.

Gets or sets the selected event hub unit.

The selected event hub unit.

Gets or sets the exact time the plan has been updated.

The exact time the plan has been updated.

Gets or sets the plan revision.

The plan revision.

Represents the details associated with the service bus connection.

Gets or sets the key name associated with the connection.

The key name associated with the connection.

Gets or sets the connection string associated with the connection.

The connection string associated with the connection.

Gets or sets the secondary connection string associated with the connection.

The secondary connection string associated with the connection.

Gets or sets the authorization type for the connection.

The authorization type for the connection.

Gets or sets the access rights associated with the connection.

The access rights associated with the connection.

Specifies the types of certificate used in the management of Service Bus for Windows Server farm.

Specifies a generated farm root certificate.

Specifies a generated farm certificate.

Specifies a custom certificate.

Specifies a generated certificate revocation list.

Represents the details of the certificate associated with the service bus farm.

Gets or sets whether the certificate is auto generated.

true if the certificate is auto generated; otherwise, false.

Gets or sets the type of the certificate.

The type of the certificate.

Gets or sets the keyname associated with the certificate.

The keyname associated with the certificate.

Gets or sets the name of the certificate.

The name of the certificate.

Gets or sets the thumbprint associated with the certificate.

The thumbprint associated with the certificate.

Gets or sets the expiration date of the certificate.

The expiration date of the certificate.

Gets or sets whether the certificate is downloadable.

true if the certificate is downloadable; otherwise, false.

Represents the metric used to monitor the Service Bus status.

Gets or sets the name of the metric.

The name of the metric.

Gets or sets the metric unit.

The metric unit.

Gets or sets the primary aggregation for this metric.

The primary aggregation for this metric.

Gets or sets the collection of metric rollup.

The collection of metric rollup.

Gets or sets the display name of the metric.

The display name of the metric.

Represents the rollup data for Service Bus metrics.

Gets or sets the time grain associated with the rollup.

The time grain associated with the rollup.

Gets or sets the time of the retention associated with the rollup.

The time of the retention associated with the rollup.

Gets or sets the collection of metric values.

The collection of metric values.

Represents the value of a metric associated with the service bus.

Gets or sets the time stamp associated with the metric value.

The time stamp associated with the metric value.

Gets or sets the minimum value of a metric.

The minimum value of a metric.

Gets or sets the maximum value of a metric.

The maximum value of a metric.

Gets or sets the total metric value.

The total metric value.

Gets or sets the average value of a metric.

The average value of a metric.

Specifies the reason for the unavailability of the service.

No reason defined.

The name of the service is invalid.

The service subscription is disabled.

The name of the service is in use.

The name of the service is in lockdown.

Too many namespace is in current subscription.

Represents the availability of the given service namespace.

The data contract serializer.

Gets or sets whether the namespace is available.

true if the namespace is available; otherwise, false.

Gets or sets the reason for unavailability of a namespace.

The reason for unavailability of a namespace.

Gets or sets the detailed info regarding the reason associated with the namespace.

The detailed info regarding the reason associated with the namespace.

Gets or sets the extension data object associated with the namespace.

The extension data object associated with the namespace.

Defines the desired semantics for a service namespace.

The data contract serializer associated with the namespace.

Initializes a new instance of the class.

Gets or sets the name of the namespace.

The name of the namespace.

Gets or sets the geographic region(s) of the Microsoft datacenters in which Customer Data will be stored.

The geographic region(s) of the Microsoft datacenters in which Customer Data will be stored.

Gets or sets the default key for the namespace.

The default key for the namespace.

Gets or sets the state of the namespace.

The state of the namespace.

Gets or sets the date when the namespace was created.

The date when the namespace was created.

Gets or sets the management endpoint for the access control service.

The management endpoint for the access control service.

Gets or sets the service bus end point value.

The service bus end point value.

Gets or sets the connection string that is used by the client to connect to the server.

The connection string that is used by the client to connect to the server.

Gets or sets the namespace subscription identifier.

The namespace subscription identifier.

Specifies whether this instance is enabled.

true if this instance is enabled; otherwise, false.

Gets or sets whether the description is a nullable critical description.

true if the description is a nullable critical description; otherwise, false.

Gets or sets a value that indicates whether to create ACS namespace.

true if ACS namespace has been created; otherwise, false.

Specifies whether the Event Hub is enabled.

true if the Event Hub is enabled; otherwise, false.

Gets or sets the type of messaging entities the namespace can contain (queues, topics, relays, Event Hubs, or notification hubs). For more information, see .

Returns .

Specifies the status of the serializer.

Initializes a new instance of the4 class.

Gets or sets the number of topics associated with the status.

The number of topics associated with the status.

Gets or sets the number of queue associated with the status.

The number of queue associated with the status.

Gets or sets the number of relays associated with the status.

The number of relays associated with the status.

Gets or sets the number of notification hub.

The number of notification hub.

Gets or sets the number of event hub.

The number of event hub.

Enumerates the different namespace states.

The namespace is unknown.

The namespace is being created.

The namespace is created.

The namespace is being activated.

The namespace is being enabled.

The namespace is active.

The namespace is being disabled.

The namespace is disabled.

The namespace is marked for deletion.

The namespace is deleted.

The namespace is being removed.

The namespace is removed.

Creating the namespace failed.

Creating the namespace failed.

Represents the service bus property.

The serializer associated with the property.

Gets or sets the name of the property.

The name of the property.

Gets or sets the property value.

The property value.

Gets or sets when the property was created.

The date when the property was created.

Gets or sets when the property was modified.

The date when the property was modified.

Gets or sets the version of the property.

The version of the property.

Creates a copy of this instance.

A created copy of this instance.

Represents the description associated with the region code for the Service bus.

The serializer associated with the description.

Gets or sets the code associated with this instance.

The code associated with this instance.

Gets or sets the full name of this instance.

The full name of this instance.

Represents the usage credit management.

Specifies the usage credit serializer.

Gets or sets the key name associated with the credit.

The key name associated with the credit.

Gets or sets the requestor service.

The requestor service.

Gets or sets the credit identifier.

The credit identifier.

Gets or sets the Basic Tier unit of the notification hub.

The basic unit of the notification hub.

Gets or sets the Standard Tier unit of the notification hub.

The standard unit of the notification hub.

Gets or sets the credit revision.

The credit revision.

Gets or sets the last date when the credit details were updated.

The last date when the credit details were updated.

Gets or sets the object that stores data

The object that stores data

Gets or sets the Azure subscription ID associated with the credit.

Returns .

Gets or sets the namespace name associated with the credit.

Returns .

Returns a string representation of .

A string representation of .

Specifies whether this instance is equal with another usage credit.

The other usage credit to compare. true if this instance is equal with another usage credit; otherwise, false.

Represents the result associated with user validation.

Gets or sets the result of the validation.

The result of the validation.

Gets or sets the reason for user validation.

the reason for user validation.

Represents a HybridConnection description.

Initializes a new instance of the class.

The relative path of the HybridConnection.

Gets or sets the relative path of the HybridConnection.

The relative path of the HybridConnection.

Gets or sets the exact time the HybridConnection was created.

The exact time the HybridConnection was created.

Gets or sets the date when the HybridConnection was updated.

The date when the HybridConnection was updated.

Gets or sets the number of listeners for this HybridConnection.

The number of listeners for this HybridConnection.

Gets or sets whether client authorization is needed for this HybridConnection.

true if client authorization is needed for this HybridConnection; otherwise, false.

Gets the .

The .

Gets or sets the user metadata associated with this instance.

The user metadata associated with this instance. Thrown if the length of value is greater than 1024 characters.

Gets or sets the name of the collection associated with the HybridConnection.

The name of the collection associated with the HybridConnection.

This is so users with Send or Listen tokens can still call GetHybridConnection[s], just not read everything, especially the AuthorizationRules and any other members which require the Manage permission.

This is so users with Send or Listen tokens can still call GetRelay/GetHybridConnection, just not read everything, especially the AuthorizationRules and any other members which require the Manage permission. Find all the Properties and Fields with [DataMember] attribute. Then, if the DataMember property/field does not also have a [ManageClaimNotRequired] attribute, clear it.

The exception that is thrown when the ServiceBus relay is not found.

Initializes a new instance of the class.

Initializes a new instance of the class.

The error message.

Initializes a new instance of the class.

The error message. The inner exception.

Initializes a new instance of the class.

The serialization information. The streaming context.

Check SSL certificate

The HTTP WebRequest The certificate from service The chain The error True if having the same DNS suffix

Represents an address configuration.

Gets or sets the URI of the address.

The URI of the address.

Represents a collection of elements in address configuration.

Initializes a new instance of the class.

Gets the addresses of the elements in the collection.

The addresses of the elements in the collection.

Represents a configuration section that holds a collection of instances.

Represents a configuration element that specifies a binding used to communicate with WS-I Basic Profile 1.1-conformant Web Services like ASMX-based services or to accept messages from ASMX-based clients through the Azure Service Bus.

Initializes a new instance of the class using the specified name.

The name of the binding element.

Initializes a new instance of the class.

Gets the type of this binding element.

Returns a that contains the binding element type.

Gets or sets a Boolean value that indicates whether the client accepts cookies and propagates them on future requests.

true if the client accepts cookies and propagates them on future requests; otherwise, false. The default value is false.

Gets or sets the maximum size of a buffer that stores messages while they are processed for an endpoint configured with this binding.

Returns the maximum buffer size. The default value is 65,536 bytes. The minimum value is 1 byte.

Gets or sets the maximum size for a buffer pool that stores messages processed by the binding.

Returns an that contains the buffer pool size. The default value is 512*1024 bytes. The minimum value is 0.

Gets or sets the maximum message size, in bytes, including headers, for a message that can be received on a channel configured with this binding.

The maximum received message size. The default value is 65,536 bytes. The minimum value is 1 byte.

Gets or sets the messaging encoding that indicates whether MTOM or text/XML is used to encode the SOAP message.

Returns a that contains either Text/XML or MTOM. The default value is Text.

Gets or sets the URI that describes the address of the HTTP proxy.

Returns a that contains the URI. The default is null.

Gets or sets an XML value that places constraints on the complexity of SOAP messages that can be processed by endpoints configured with this binding.

Returns a that contains the reader quotas.

Gets the type of security to be used for the binding.

Returns a that specifies the type of security to be used with the binding. The default value is None.

Gets or sets the character set encoding to be used for emitting messages on the binding.

Returns a that contains the text encoding. The default value is UTF8.

Gets or sets whether messages are buffered or streamed on a request or response.

Returns a that contains the transfer mode. The default value is TransferMode.Buffered.

Gets or sets a value that indicates whether the auto-configured HTTP proxy of the system should be used, if available.

true to use the http proxy; otherwise, false. The default value is true.

Gets or sets whether the binding element is dynamic.

true if the binding element is dynamic; otherwise, false.

Initializes this binding configuration element with the content of the specified binding collection.

The Binding to initialize from.

Applies the settings of this configuration element to the specified binding.

The Binding to apply this configuration to.

Gets a collection of objects that can be attributes or configuration element objects of this binding configuration element.

Returns a that contains the properties of the current instance.

A configuration element that configures SOAP message security.

Gets or sets the type of client credential used for client authentication.

Returns a that contains the credentials. The default is UserName.

Gets or sets the security algorithm to use with the class.

Returns a that contains the security algorithm. The default is Basic256.

Represents a configuration element that configures the security for a basic HTTP relay binding.

Gets or sets the security mode for a .

Returns a value from the enumeration. The default value is none.

Gets or sets the authentication type specified in this configuration element.

Returns a value from that contains the type of authentication to be used by binding elements the current instance is applied to.

Gets a configuration element that specifies the transport-level security settings for a binding.

Returns a that contains properties that control authentication parameters for the HTTP transport.

Gets a Configuration element that specifies the message-level security settings for a .

Returns a that contains the security settings.

Gets the collection of properties.

Be sure to update UnsafeGetAssociatedBindingCollectionElement if you modify this method Critical - uses SecurityCritical method UnsafeGetAssociatedSection which elevates Be sure to update GetAssociatedBindingCollectionElement if you modify this method Be sure to update UnsafeGetAssociatedSection if you modify this method Critical - uses SecurityCritical methods which elevate Be sure to update GetAssociatedSection if you modify this method Be sure to update UnsafeGetBindingCollectionElement if you modify this method Critical - uses SecurityCritical method UnsafeGetAssociatedBindingCollectionElement which elevates Be sure to update GetBindingCollectionElement if you modify this method Be sure to update UnsafeGetSection if you modify this method Critical - uses SecurityCritical method UnsafeGetAssociatedSection which elevates Be sure to update GetSection if you modify this method Be sure to update UnsafeGetSectionFromWebConfigurationManager if you modify this method Critical - Asserts ConfigurationPermission in order to fetch config from WebConfigurationManager caller must guard return value Be sure to update GetSectionFromWebConfigurationManager if you modify this method Critical - Asserts ConfigurationPermission in order to fetch config from ConfigurationManager caller must guard return value Critical - Asserts ConfigurationPermission in order to fetch config from ContextInformation caller must guard return value Critical - Asserts ConfigurationPermission in order to fetch config from WebConfigurationManager caller must guard return value Critical - calls SetIsPresentWithAssert which elevates in order to set a property caller must guard ConfigurationElement parameter, ie only pass 'this' Critical - Asserts ReflectionPermission(MemberAccess) in order to set a private member in the ConfigurationElement caller must guard parameters RequiresReview - the return value will be used for a security decision. if in doubt about the return value, it is safe to return null (caller will assume the worst case from a security perspective).

Get the setting for CertificateRevocationMode

Online if not found.

Get the setting for override connectivityMode

null if not found.

return the current ContextInformation (the protected property ConfigurationElement.EvaluationContext) this may throw ConfigurationErrorsException, caller should guard (see ConfigurationHelpers.GetEvaluationContext)

result of ConfigurationElement.EvaluationContext

return the ContextInformation that was present when the ConfigurationElement was first deserialized. if Reset was called, this will be the value of parent.GetOriginalEvaluationContext() if Reset was not called, this will be the value of this.GetEvaluationContext()

result of parent's ConfigurationElement.EvaluationContext RequiresReview - the return value will be used for a security decision. if in doubt about the return value, it is safe (from a security perspective) to return null (caller will assume the worst case).

Represents the configuration element that provides additional configuration settings to connection-oriented transport binding elements, such as TCP and named pipes.

Gets or sets the size of the buffer used to transmit a part of the serialized message on the wire from the client or service.

Returns a that contains the size of the buffer used to transmit a part of the serialized message on the wire from the client or service. The default value is 8K.

Gets or sets a value that indicates whether the hostname is used to reach the service when matching on the URI.

A valid HostnameComparisonMode value that indicates whether the hostname is included when routing incoming requests to an endpoint URI. The default value is StrongWildcard, which ignores the hostname in the match.

Gets or sets the maximum time the channel can be in the initialization status before being disconnected.

The maximum time the channel can be in the initialization status before being disconnected.

Gets or sets the maximum size of the buffer to use.

The maximum number of bytes that are used to buffer incoming messages in memory. The default value is 65,536 bytes.

Gets or sets the maximum number of pending connections.

The maximum number of pending connections.

Gets or sets the maximum interval of time that a part of a message or a full message can remain buffered in memory before being sent out.

The maximum interval of time that a part of a message or a full message can remain buffered in memory before being sent out. The default value is 2 seconds.

Gets or sets the maximum number of pending asynchronous accept threads that are available for processing incoming connections on the service.

The maximum number of pending messages the service can accept. The default value is 1.

Gets or sets a value that specifies whether the messages are buffered or streamed with the connection-oriented transport.

Returns a valid value that specifies whether a channel uses streamed or buffered modes of message transfer. The default is Buffered.

Gets a ConfigurationPropertyCollection instance that contains a collection of ConfigurationProperty objects that can be attributes or ConfigurationElement objects of this configuration element.

Returns a instance that contains a collection of ConfigurationProperty objects that can be attributes or ConfigurationElement objects of this configuration element.

Applies the settings of this configuration element to the specified .

The binding element to update the settings of.

Copies the content of the specified configuration element to this configuration element.

The configuration element to be copied.

Reads a configuration element that describes the connection status.

Gets the type of behavior.

Returns a that contains the behavior type.

Creates a behavior extension based on the current configuration settings.

Returns an that contains the behavior extension.

Enumerates the service bus section type.

The All section type.

The Namespace Manager section type.

The Messaging Factory section type.

Represents a shared access signature element.

Gets or sets the shared access key name.

The shared access key name.

Gets or sets the shared access key.

The shared access key.

Gets or sets the token scope associated with the element.

The token scope associated with the element.

Gets the collection of configuration properties.

The collection of configuration properties.

Copies the specified element from this configuration element.

The source to copy the contents from.

Represents the security token service of the URI element.

Gets or sets the value of the element.

The value of the element.

Represents a URI element collection for the Security Token Service.

Initializes a new instance of the class.

Gets the addresses of the element in the collection.

The addresses of the element in the collection.

Represents a collection of elements for the token provider.

Gets an item in the collection.

The name of the item. An item in the collection.

Represents the windows element for the configuration of the service bus.

Gets or sets a value that indicates whether to use default credentials.

true if to use default credentials; otherwise, false.

Gets or sets the username.

The username.

Gets or sets the password.

The password.

Gets or sets the domain.

The domain.

Gets or sets the collection of security token service (STS) URI.

The collection of security token service (STS) URI.

Gets or sets the collection of configuration properties.

The collection of configuration properties.

Copies the specified windows element into the current instance.

The windows element to copy.

Represents a configuration element that, when included in a custom binding, specifies a channel to transfer one-way messages through the Azure Service Bus. This class cannot be inherited.

Initializes a new instance of the class.

Gets the type of the current instance.

Returns a that contains the type of the current instance, which is the type of .

Gets or sets an XML value that describes the one-way connection mode.

Returns a that contains the connection mode.

Gets or sets an XML value that describes the connection pool settings for the current instance.

Returns a that contains the connection pool settings used by the binding element that the current instance is applied to.

Gets or sets the maximum number of queued connection requests that can be pending.

The maximum number of queued connection requests that can be pending.

Gets or sets an XML value that describes the authentication type specified in this configuration element.

Returns a that contains the type of authentication to be used by binding elements that the current instance is applied to.

Applies the settings from this configuration element to the specified binding element.

The binding element to update the settings of.

Copies the settings from the specified configuration element to the current instance.

The configuration element to copy from.

Represents the configuration element that specifies an HTTPS transport for transmitting SOAP messages through the Azure Service Bus.

Initializes a new instance of the class.

Gets the type of the binding element.

The type of the binding element.

Creates a binding element from settings in this configuration element.

Returns a whose properties are copied from the settings in this configuration element.

Represents a configuration element that specifies an HTTP transport for transmitting SOAP messages.

Initializes a new instance of the class.

Gets or sets a value from the configuration file that indicates whether the client accepts cookies and propagates them on future requests.

true if cookies are allowed; otherwise, false. The default is false.

Gets or sets the relay client authentication type stored in the configuration file.

Returns a .

Gets the type of binding. (Overrides BindingElementExtensionElement.BindingElementType.)

Returns a that contains the binding type.

Gets or sets a Boolean value from the configuration file that indicates whether to make a persistent connection to the internet resource.

true if a persistent connection to the internet resource is maintained; otherwise, false.

Gets or sets the maximum size of the buffer pool from the configuration file.

Returns the maximum buffer size. The default value is 65,536.

Gets or sets a URI in the configuration file that contains the address of the proxy to use for HTTP requests.

Returns a that contains the URI. The default is null.

Gets or sets the authentication scheme used to authenticate client requests that are processed by the HTTP proxy.

The authentication scheme used to authenticate client requests that are processed by the HTTP proxy.

Gets or sets a value from the configuration file that specifies whether messages are buffered or streamed on a request or response.

Returns a that specifies whether messages are buffered or streamed on a request or response. By default, the HTTP, TCP/IP, and named pipe transports use buffered message transfers.

Gets or sets a value from the configuration file that indicates whether the machine-wide proxy settings are used rather than the user-specific settings.

true if the System.Net default proxy settings are used; otherwise, false. The default is true.

Gets or sets whether the relay binding is dynamic.

true if the relay binding is dynamic; otherwise, false.

Applies the settings of this configuration element to the specified binding element.

The binding element to update the settings of.

Copies the properties of the specified extension element to this configuration element.

The extension element whose properties to copy.

Creates a binding element from the settings in this configuration element.

Returns a that contains the default binding element.

Initializes this binding configuration element with the content of the specified binding element.

The binding element to initialize from.

Gets a instance that contains a collection of ConfigurationProperty objects that can be attributes or ConfigurationElement objects of this configuration element. (Overrides TransportElement.Properties.)

Returns a that contains the properties of the current instance.

A configuration element that describes the message security for a one-way message to the Azure Service Bus relay.

Gets or sets from the configuration file the type of credential to be used when performing client authentication using message-based security or TransportWithMessageCredential.

Returns a that contains the message credential type. The default is Windows.

Gets or sets from the configuration file the message encryption and key-wrap algorithms used to secure a one-way message.

Returns a that contains the algorithm suite. The default is Base256.

A configuration element that controls transport security settings for the and types. This class cannot be inherited.

Gets or sets the transport security protection level that is applied to messages transmitted through bindings configured with this configuration element.

Returns a that contains the transport security protection level specified in this configuration element.

Gets the collection of properties.

Represents a configuration element that holds a collection of instances.

A configuration element that describes configuration settings for the .

Initializes a new instance of the class, using the specified name.

The binding name set in the configuration.

Initializes a new instance of the class.

Gets the type of binding that this configuration element represents.

Returns a that contains the binding type, which is the type of .

Gets or sets the maximum number of queued connection requests that can be pending.

Returns the maximum number of queued connection requests that can be pending. The default is 10.

Gets or sets the maximum size allowed for a buffer pool that stores messages processed by the binding.

Returns the maximum size allowed for a buffer pool that stores messages processed by the binding. The default value is 65,536 bytes.

Gets or sets the maximum size, in bytes, of the buffer used to store messages in memory.

Returns the maximum size, in bytes, of the buffer used to store messages in memory. The default value is 65,536 bytes.

Gets or sets the maximum number of connections to be pooled for subsequent reuse on the client and the maximum number of connections allowed to be pending dispatch on the server.

On the client, returns the maximum number of connections to be pooled for subsequent reuse; on the server, returns the maximum number of connections allowed to be pending dispatch.

Gets or sets the maximum size for a received message that is processed by the binding.

Returns the maximum size, in bytes, for a received message that is processed by the binding. The default value is 65,536 bytes.

Gets or sets an XML element that contains the constraints on the complexity of SOAP messages that can be processed by endpoints configured with this binding.

Returns a that specifies the complexity constraints on SOAP messages.

Gets a configuration element that contains the security options for an Azure Service Bus net event relay binding.

Returns a that describes the security options. The default is Transport.

Initializes the contents of this XML configuration element from the property values of a specified binding.

The binding to copy the settings from.

Applies the settings of this configuration element to the specified binding.

The binding to update the settings of.

Gets a collection that contains objects that can be attributes or configuration element objects of this binding configuration element.

Returns a instance that contains a collection of ConfigurationProperty objects that can be attributes or ConfigurationElement objects of this configuration element.

Represents a configuration section that holds a collection of instances.

Represents a configuration element that specifies a binding for peer channel-specific TCP messaging over the Service Bus.

Initializes a new instance of the class using the specified name.

A name that uniquely identifies this configuration element.

Initializes a new instance of the class.

Gets or sets an XML value that contains the type of binding element of the current instance.

Returns a that contains the type of the current instance.

Gets or sets an XML value that contains the maximum number of queued connection requests that can be pending.

Returns the maximum number of queued connection requests that can be pending. The default is 10.

Gets or sets an XML value that contains the maximum size allowed for a buffer pool that stores messages processed by the binding.

Returns the maximum size allowed for a buffer pool that stores messages processed by the binding. The default value is 65,536.

Gets or sets an XML value that contains the maximum size, in bytes, of the buffer used to store messages in memory.

Returns the maximum size, in bytes, of the buffer used to store messages in memory. The default value is 65,536 bytes.

Gets or sets an XML value that specifies the maximum number of outbound and inbound connections the service creates and accepts respectively.

On the client, returns the maximum number of connections to be pooled for subsequent reuse; on the server, returns the maximum number of connections allowed to be pending dispatch.

Gets or sets an XML value that contains the maximum size of a message that can be received on a channel configured with this binding.

Returns maximum size, in bytes, for a message that is processed by the binding. The default value is 65,536 bytes.

Gets or sets an XML value that places a constraint on the complexity of SOAP messages that can be processed by endpoints configured with this binding.

Returns a that specifies the complexity constraints on SOAP messages.

Gets an XML value that contains security elements for a Service Bus one-way TCP relay binding.

Returns a that describes the security elements.

Initializes the current instance using the content of the specified binding.

The binding.

Applies the settings of this configuration element to the specified binding.

The binding to update the settings of.

Gets a ConfigurationPropertyCollection instance that contains a collection of ConfigurationProperty objects that can be attributes or ConfigurationElement objects of this configuration element.

Returns a that contains a collection of ConfigurationProperty objects that can be attributes or ConfigurationElement objects of this configuration element.

Defines the security settings for the binding in an App.config file. This class cannot be inherited.

Gets or sets the type of security that is applied.

Returns an instance that contains the security mode.

Gets a value that describes whether clients of a service are required to present a security token issued by the Azure Service Bus service to the Azure Service Bus service when sending messages.

Returns a that contains the relay client authentication type.

Gets the security settings for the transport.

Returns a that contains the security settings.

Gets the security settings for the message.

Returns a that contains the message.

Represents a configuration element that controls authentication parameters for the HTTP transport. This class cannot be inherited.

Gets or sets from the configuration file the type of client credential to be used for authentication against the proxy.

Returns a that contains the proxy type.

A configuration element that describes an issuer of a token for the Azure Service Bus.

Gets or sets the URI address of the token issuer.

The URI address of the token issuer.

Gets the collection of properties contained in this configuration element.

The collection of properties contained in this configuration element.

Copies the contents of the specified configuration element to this configuration element.

The configuration element to copy the contents from.

A configuration element that describes message security options over a relayed connection through the Azure Service Bus.

Gets or sets from the configuration file the type of credential to be used when performing client authentication using message-based security or TransportWithMessageCredential.

Returns a that contains the type of credential. The default is Windows.

Gets or sets from the configuration file the message encryption and key-wrap algorithms used to secure messages.

Returns a that contains the message encryption and key-wrap algorithms. The default is Basic256, which specifies 256-bit Advanced Encryption Standard (AES) as the symmetric encryption algorithm.

Represents a configuration section that holds a collection of instances.

A configuration element that describes a secure, reliable binding suitable for cross-machine communication through the Azure Service Bus relay.

Initializes a new instance of the class with a specified configuration name.

The binding configuration name.

Initializes a new instance of the class.

Gets the type of this configuration element. (Overrides StandardBindingElement.BindingElementType.)

Returns a that contains the configuration element type.

Gets or sets the connection mode stored in the App.config file for this configuration.

Returns a that contains the connection mode The default is Relayed.

Gets or sets a value from the App.config file that specifies whether messages are buffered or streamed or a request or response.

Returns a that contains indicates whether the service configured with the binding uses streamed or buffered (or both) modes of message transfer. The possible values are as follows: BufferedStreamedStreamedRequestStreamedResponseThe default value is Buffered.Specifying to Streamed implies both StreamedRequest and StreamedResponse.

Gets or sets a value in the App.config file that specifies the maximum number of channels that can wait to be accepted on the listener.

Returns the maximum number of queued connection requests that can be pending. The default is 10.

Gets or sets a value from the App.config file that contains the maximum size for a buffer pool that stores TCP messages processed by the binding.

Returns the maximum size allowed for a buffer pool that stores messages processed by the binding. The default value is 65,536 bytes.

Gets or sets a value from the App.config file that specifies the maximum size, in bytes, of the buffer used to store messages in memory.

The maximum size, in bytes, of the buffer used to store messages in memory.

Gets or sets a value from the App.config file that specifies the maximum number of outbound and inbound connections the service creates and accepts respectively.

On the client, returns the maximum number of connections to be pooled for subsequent reuse; on the server, returns the maximum number of connections allowed to be pending dispatch.

Gets or sets a value from the App.config file that contains the maximum size of a message that can be received on a channel configured with this binding.

Returns maximum size, in bytes, for a message that is processed by the binding. The default value is 65,536 bytes.

Gets a value from the App.config file that puts constraints on the complexity of SOAP messages that can be processed by endpoints configured with this binding.

Returns a that specifies the complexity constraints on SOAP messages exchanged. The default values for these constraints are provided in the following Remarks section.

Gets a configuration element that specifies whether reliable sessions are established between channel endpoints.

Returns a that indicates whether a WS-RM reliable session is established between channel endpoints. The default value is false.

Gets a value from the App.config file that determines the type of security to be used with this binding.

Returns a that contains the security settings for the associated binding. The default value is none.The you retrieve from the associated binding is created indirectly with a NetTcpRelayBinding. As such, after the binding is created, you cannot replace this object with a new object unless you also create a new binding. However, many members of WebHttpRelaySecurity can be set through security property. For more information on binding security, see the Security and Protection section. Along with the type of transport and encoding, the Security settings represent one of the three main properties that define this binding.

Gets or sets whether the relay binding is dynamic.

true if the relay binding is dynamic; otherwise, false.

Initializes the contents of this binding configuration element from the property values of a specified binding.

The binding to initialize from.

Applies the settings of this configuration element to the specified binding element.

The binding to update the settings of.

Gets a ConfigurationPropertyCollection instance that contains a collection of ConfigurationProperty objects that can be attributes or ConfigurationElement objects of this configuration element. (Overrides StandardBindingElement.Properties.)

A collection of ConfigurationProperty objects that can be attributes or ConfigurationElement objects of this configuration element.

Represents a configuration element that configures the security for a net TCP service through the Azure Service Bus relay.

Gets or sets an XML value that describes whether message-level or transport-level security is used by an endpoint configured with .

Returns a that contains the security mode. The default value is Transport.

Gets or sets the authentication type required for the client to present to the Azure Service Bus when sending messages.

Returns a that contains the authentication type.

Gets the transport security setting for the .

Returns a that contains the relay binding.

Gets a configuration element that represents the message security settings for the .

Returns a that contains the message.

Gets the collection of properties.

Contains the settings for the AppFabric Service Bus registry.

Gets the behavior type for the service registry settings.

The behavior type for the service registry settings.

Creates a behavior extension based on the current registry settings.

The behavior extension based on the current registry settings.

Gets or sets how the service is discovered.

The discovery type.

Gets or sets the display name for the endpoint.

The display name.

A configuration element that specifies the credentials for a service or client endpoint that is configured to use the credential type.

Gets or sets the issuer name.

The issuer name.

Gets or sets the issuer secret key.

The issuer secret key.

Gets or sets the token scope.

The token scope.

Gets the properties of this configuration element that contain the issuer name and the issuer secret key.

The properties of this configuration element that contain the issuer name and the issuer secret key.

Copies the contents of the specified shared secret configuration element to this configuration element.

The shared secret configuration element to be copied.

Represents a configuration element that specifies additional connection pool settings for a TCP transport. This class cannot be inherited.

Initializes a new instance of the class.

Gets or sets the name of the connection pool used for outgoing channels.

Returns the name of the connection pool used for outgoing channels.

Gets or sets the time span after which an active connection is closed.

Returns a that indicates the duration after which the TCP connection is closed.

Gets or sets the maximum time that the connection can be idle before being disconnected.

Returns a positive that specifies the maximum time that the connection can be idle before being disconnected. The default is 00:02:00.

Gets or sets the maximum number of connections to a remote endpoint initiated by the service.

Returns the maximum number of connections to a remote endpoint initiated by the service. The default is 10.

Gets the collection of properties.

Represents a configuration element that configures the security for a TCP transport service through the Azure Service Bus relay.

Gets or sets an XML value containing the transport security level for a TCP relay.

Returns a that contains the transport security level. The default value is EncryptAndSign.

Gets the collection of properties.

Specifies a configuration element that causes a channel to transfer messages on the TCP transport when it is included in a custom binding. This class cannot be inherited.

Initializes a new instance of the class.

Applies the settings of this configuration element to the specified binding element.

The binding element to update the settings of.

Gets the type of this binding element.

Returns a containing a binding element type.

Copies the content of the specified configuration element to this configuration element.

The configuration elements to be copied.

Creates a binding element from the settings in this configuration element.

Returns a that contains the default binding element.

Initializes this binding configuration element with the content of the specified binding element.

The binding element to initialize from.

Gets or sets the connection mode stored in the App.config file for this configuration.

Returns a that contains the connection mode. The default setting is Relayed.

Gets or sets an XML value that contains the relay client authentication type.

Returns a that contains the relay client authentication type. The default is RelayClientAuthenticationType.RelayAccessToken.

Gets or sets an XML value containing the maximum number of queued connection requests that can be pending.

Returns the maximum number of queued connection requests that can be pending. The default is 10.

Gets or sets an XML value that describes the connection pool settings for the current instance.

Returns a that contains the connection pool settings used by the binding element that the current instance is applied to.

Gets or sets whether the relay binding is dynamic.

true if the relay binding is dynamic; otherwise, false.

Gets the collection of properties.

Represents the configuration element that specifies the token provider for the Service Bus.

Gets the name of the specified object.

The specified object.

Gets the shared secret element contained in the token provider element.

The shared secret element contained in the token provider element.

Gets the Windows authentication settings for this element.

The Windows authentication settings for this element.

Gets the shared access signature element.

The shared access signature element.

Gets the collection of properties contained in the configuration element.

The collection of properties contained in the configuration element.

Copies the contents of the specified configuration element to this configuration element.

The configuration element to copy the contents from.

Represents a configuration element that specifies the behavior of a service or client endpoint for a transport on the Azure Service Bus relay.

Gets or sets the token provider that is used as a binding parameter.

The token provider used as a binding parameter.

Gets or sets the behavior type for the transport client endpoint.

The behavior type for the transport client endpoint.

Gets the collection of properties contained in this configuration element.

The collection of properties contained in this configuration element.

Copies the contents of the specified configuration element to this configuration element.

The configuration element to copy the contents from.

Returns a new object with the same settings as this configuration element.

A new object with the same settings as this configuration element.

Represents a configuration element that contains sub-elements that specify settings for using the binding.

Gets the default binding used.

Returns a that represents the default binding.

A binding element used to configure endpoints for an Azure Service Bus relay service that responds to HTTP requests instead of SOAP messages.

Initializes a new instance of the class using the specified name.

The name of the new binding element.

Initializes a new instance of the class.

Gets or sets a value that indicates whether the client accepts cookies and propagates them on future requests.

true if cookies are allowed; otherwise, false. The default is false.

Gets or sets the maximum amount of memory allocated for the buffer manager that manages the buffers required by endpoints that use this binding.

Returns the maximum size, in bytes, for the pool of buffers used by an endpoint configured with this binding. The default value is 65,536 bytes.

Gets or sets the maximum amount of memory that is allocated for use by the manager of the message buffers that receive messages from the channel.

Returns the maximum amount of memory, in bytes, available for use by the message buffer manager. The default value is 524,288 (0x80000) bytes. The value set is less than or equal to zero.

Gets or sets the maximum size for a message that can be processed by the binding.

Returns the maximum size, in bytes, for a message that is processed by the binding. The default value is 65,536 bytes. The value is less than zero.

Gets or sets the URI address of the HTTP proxy.

Returns a that serves as the address of the HTTP proxy. The default value is null.

Gets or sets the configuration element that contains the constraints on the complexity of SOAP messages that can be processed by endpoints configured with this binding.

Returns an that contains the complexity restraints. The valueset is null. The quota values of XmlDictionaryReaderQuotas are read only. The quotas set must be positive.

Gets the configuration element that contains the security settings used with this binding.

Returns a that contains the security settings for this binding. The default value is none.

Gets or sets a value that indicates whether the service configured with the associated binding uses streamed or buffered (or both) modes of message transfer.

Returns a that contains indicates whether the service configured with the binding uses streamed or buffered (or both) modes of message transfer. The default value is Buffered. The value set is not a valid TransferMode value.

Gets or sets a value that indicates whether the auto-configured HTTP proxy of the system should be used with the associated binding, if available.

true if the auto-configured HTTP proxy of the system should be used, if available; otherwise, false. The default value is true.

Gets or sets whether the binding element is dynamic.

true if the binding element is dynamic; otherwise, false.

Gets or sets the character encoding that is used for the message text in the associated binding.

Returns a that indicates the character encoding that is used. The default is UTF8Encoding. The value set is null.

Gets the type of binding that this configuration element represents.

Returns a that contains the binding type.

Gets a collection of objects that can be attributes or configuration element objects of this configuration element.

Returns a that contains a collection of ConfigurationProperty objects that can be attributes or ConfigurationElement objects on this configuration element.

Initializes the contents of this binding configuration element from the property values of a specified binding.

The binding to update this configuration element from.

Applies the settings of this configuration element to the specified binding.

The binding to update the settings of.

Represents a configuration element that configures the security for a Web HTTP service through the Azure Service Bus relay.

Gets or sets the security mode used by the binding.

Returns a that contains the end-to-end HTTP security mode used by the service endpoint.

Gets or sets the relay client authentication type used by the service client.

Returns a that contains the authentication type.

Gets a configuration element that indicates the transport-level security settings for a service endpoint configured to receive HTTP requests.

Returns a that contains the security settings.

Represents a configuration section that holds a collection of instances.

Represents a configuration element that contains the settings for a binding that provides support for the updated versions of the Security, ReliableSession, and TransactionFlow binding elements.

Initializes a new instance of the using the specified name.

The name of the binding. This value should be unique because it is used as identification for the binding.

Initializes a new instance of the class.

Gets the type of the binding element of the current instance.

Returns a that contains the binding element type.

Provides a base class for the configuration element that specifies a binding that supports distributed transactions and secure, reliable sessions.

Initializes a new instance of the class with the specified name.

A name that uniquely identifies this configuration element.

Initializes a new instance of the class.

Gets or sets the maximum size of the buffer pool that stores messages processed by the binding.

The maximum size of the buffer pool that stores messages processed by the binding. The default is 524288 bytes.

Gets or sets the maximum size for messages received on a channel configured with the binding.

The maximum size for messages received on a channel configured with the binding. The default is 65536 bytes.

Gets or sets whether MTOM or Text/XML is used to encode SOAP messages.

Indicates whether MTOM or Text/XML is used to encode SOAP messages. The default is Text/XML.

Gets or sets the URI address of the HTTP proxy.

The URI address of the HTTP proxy. The default is null.

Gets constraints on the complexity of SOAP messages that can be processed by endpoints configured with the binding.

Constraints on the complexity of SOAP messages that can be processed by endpoints configured with the binding.

Gets a configuration element that represents an optional configuration setting for WS-Reliable messaging defined in the binding.

A configuration element that represents an optional configuration setting for WS-Reliable messaging defined in the binding.

Gets or sets the character encoding that is used for the message text.

The character encoding that is used for the message text.

Gets or sets a value that indicates whether the auto-configured HTTP proxy of the system should be used, if available.

true if the auto-configured HTTP proxy of the system should be used, if available; otherwise, false.

Gets or sets whether the binding base element is dynamic.

true if the binding base element is dynamic; otherwise, false.

Gets a collection of properties of this binding configuration element.

A collection of properties of this binding configuration element.

Initializes this binding configuration element with the content of the specified binding.

A binding.

Applies the settings of this configuration element to the specified binding.

The binding to update the settings of.

A configuration element that represents an interoperable binding that supports distributed transactions and secure, reliable sessions.

Gets the type of the binding.

The type of the binding.

Gets or sets a value that indicates whether the service or client accepts cookies and propagates them on future requests.

true if the service or client accepts cookies and propagates them on future requests; otherwise, false. The default is false.

Gets the configuration element that contains the security settings for the binding.

The configuration element that contains the security settings for the binding.

Initializes this binding configuration element with the content of the specfied binding.

The binding to initialize this configuration element from.

Applies the settings of this configuration element to the specified binding.

The binding to update the settings of.

Gets a collection of properties of this binding configuration element.

A collection of properties of this binding configuration element.

Represents a configuration element that configures the security for a WS-HTTP service through the Azure Service Bus relay.

Gets or sets the mode of security that is used by an endpoint configured to receive HTTP requests.

Returns a that specifies the type of security that is applied. The default value is Message.

Gets or sets the relay client authentication type used by the service client.

Returns a that contains the authentication type.

Gets the security settings for the transport.

Returns a that specifies the security settings for the transport.Use the object returned by this property to set the transport security parameters for the . If the TransportCredentialOnly value is specified by , then the settings provided by the Transport property become effective for the service endpoint. The value of this property can set only in the constructor it as an explicit parameter and its value cannot be set again after the binding instance is created.

Gets the security settings for the message.

Returns a that specifies the security settings for the message.

A configuration element that describes the security on an HTTP transport over the Azure Service Bus relay.

Gets or sets the type of credential to be used by the service or client endpoint for authentication against the proxy.

The type of client credential to be used by the service or client endpoint for authentication against the proxy.

A configuration element that defines the constraints on the complexity of SOAP messages that can be processed by endpoints configured with a binding. This class cannot be inherited.

Gets or sets the maximum nested node depth for each read.

The maximum nested node depth for each read.

Gets or sets the maximum number of characters allowed in XML element content.

The maximum number of characters allowed in XML element content.

Gets or sets the maximum allowed array length.

The maximum allowed array length.

Gets or sets the maximum allowed number of bytes returned for each read.

The maximum allowed number of bytes returned for each read.

Gets or sets the maximum number of characters allowed in a table name.

The maximum number of characters allowed in a table name.

Gets the collection of properties.

A configuration element that describes the message security over the Azure Service Bus relay, using an HTTP transport mechanism.

Gets or sets from the configuration file the type of credential to be used when performing client authentication using message-based security or TransportWithMessageCredential.

Returns a that contains the message credential type.

Gets or sets from the configuration file a Boolean value that specifies whether the service credential is provisioned at the client out-of-band, or is obtained from the service to the client through a process of negotiation.

true if the service credential is provisioned at the client out-of-band, or is obtained from the service to the client through a process of negotiation; otherwise, false.

Gets or sets from the configuration file the message encryption and key-wrap algorithms used to secure an HTTP message.

The message encryption and key-wrap algorithms used to secure an HTTP message.

Represents the configuration settings for the security of a message sent using HTTP for non-duplex service contracts. This class cannot be inherited.

Gets or sets an XML value that defines whether a Security Context was established.

true if the context is established; otherwise, false.

An endpoint behavior that provides access to the connection status of a service listening on Azure Service Bus.

Initializes a new instance of the class.

Gets a value that determines if the connection is online.

true if the connection is online; otherwise, false.

Gets the last error.

Returns a that contains the last error.

Occurs when the endpoint gets temporarily disconnected from the Relay Service and for each reconnect attempt.

Occurs when the endpoint stops attempting to connect to the Relay Service.

Occurs when the endpoint successfully connects to the Relay Service.

Retries the connection.

This method does nothing.

The endpoint this behavior applies to.

Passes data at runtime to bindings to support custom behavior. This implementation does nothing.

The endpoint to modify. The objects that binding elements require to support the behavior.

This implementation does nothing.

The endpoint that is to be customized. The client runtime to be customized.

Hooks up the listener runtime connection status events.

The endpoint that is to be customized. The endpoint dispatcher to be modified or extended.

Represents a binding that a client can use to configure endpoints that can communicate with ASMX-based Web services and other services that conform to the WS-I Basic Profile 1.1.

Initializes a new instance of the class.

Initializes a new instance of the class using the specified configuration.

The configuration to use.

Initializes a new instance of the class with a specified type of security used by the binding and the authentication type used by the client.

The type of security used with the SOAP message and for the client. The type of authentication used by the client.

Gets or sets a value that determines if the client allows cookies.

Returns .true to allow cookies; otherwise, false. The default value is false.

Gets or sets how the host name should be compared.

The comparison method used in the host name.

Gets or sets the maximum size for a buffer that receives messages from the channel.

Returns .The maximum size, in bytes, of a buffer that stores messages while they are processed for an endpoint configured with this binding. The default value is 65,536 bytes.

Gets or sets the maximum size allowed for a buffer pool that stores TCP messages processed by the binding.

The maximum size allowed for a buffer pool that stores TCP messages processed by the binding.

Gets or sets the maximum size for a message that can be received on a channel configured with this binding.

Returns .The maximum size, in bytes, for a message that is processed by the binding. The default value is 65,536 bytes.

Gets or sets the type of message encoding.

Returns a that contains the type of message encoding. The default value is Text.

Gets or sets the proxy address.

Returns a that contains the proxy address. The default value is null.

Gets or sets the reader quotas.

Returns a that specifies the complexity constraints on SOAP messages exchanged. The default values for these constraints are provided in the following Remarks section.

Gets the URI transport scheme for the channels and listeners that are configured with this binding.

The URI transport scheme for the channels and listeners that are configured with this binding.

Gets the collection of security bindings used with this binding.

Returns a that contains the security settings used in the binding. The default value has EndToEndBasicSecurityMode set to Transport, RelayClientAuthenticationType set to RelayAccessToken, HttpRelayTransportSecurity with HttypProxyCredentialType of None, and BasicHttpRelayMessageSecurity with ClientCredentialType of BasicHttpMessageCredentialType.UserName and an AlgorithmSuite of SecurityAlgorithmSuite.Basic256.

Gets the version of SOAP that is used for messages that are processed by this binding.

Returns .The value that is used with this binding.

Gets or sets the character encoding that is used for the message text.

Returns a that indicates the character encoding that is used. The default is UTF8Encoding.

Gets or sets the transfer mode.

Returns a that indicates whether the service configured with the binding uses streamed or buffered (or both) modes of message transfer. By default, the HTTP, TCP/IP, and named pipe transports use buffered message transfers. The default value is buffered.

Gets or sets a value that determines if the client uses the default web proxy.

Returns true if the client uses the default web proxy; otherwise, false. The default is true.

Gets or sets whether the binding element is dynamic.

true if the binding element is dynamic; otherwise, false.

Indicates that incoming requests are handled asynchronously.

Returns an ordered collection of binding elements contained in the current binding.

Returns .Contains the ordered stack of binding elements described by the . The order of the binding elements starting from the bottom is transport, encoding, and security.

Provides properties used to configure message-level security settings for .

Specifies the type of credential with which the client authenticates.

Returns a that contains a member of the enumeration. The default value is UserName..

Specifies the algorithm suite to use with .

Returns a , which specifies 256-bit Advanced Encryption Standard (AES) as the symmetric encryption algorithm. The default value is Base256. This property cannot be null. The value of is null.

Provides properties used to configure the security settings of a binding.

Gets or sets the security mode for a binding.

One of the values of enumeration. The default value is None. The value is not a legal value for .

Gets or sets the type of authentication used by the Azure Service Bus service.

Returns a that contains the type of authentication used by the service.

Gets the transport-level security settings for a binding.

Returns a that contains the security settings.

Gets the message-level security settings for a binding.

Returns a , which represents the message-level security settings for this binding.

An enumeration type that specifies the modes of security that can be used with .

Messages are not secured during transfer.

Security is provided using HTTPS. The service must be configured with SSL certificates. The SOAP message is protected as a whole using HTTPS. The service is authenticated by the client using the service’s SSL certificate. The client authentication is controlled through the ClientCredentialType.

Security is provided using WS-Security SOAP message security. For the , the system requires that the server certificate be provided to the client separately. The valid client credential types for this binding are UserName and Certificate.

Integrity, confidentiality and server authentication are provided by HTTPS. The service must be configured with a certificate. Client authentication is provided by means of SOAP message security. This mode is applicable when the user is authenticating with a UserName or Certificate credential and there is an existing HTTPS deployment for securing message transfer.

Provides access to the current connection state of a hybrid connection channel.

Gets the current connection state of the hybrid connection.

Returns .Contains the connection state.

Occurs when the connection state changes.

Represents the arguments to the hybrid connection state change.

Initializes a new instance of the class.

The state of the hybrid connection.

Gets the current connection state of the hybrid connection.

Returns .Contains the connection state.

Describes the current connection state for a hybrid connection.

A relayed connection. The communicating parties connect through a relayed socket and the Azure Service Bus infrastructure.

A direct connection. The communicating parties connect using a socket routed on the most direct network path, rather than through the Azure Service Bus infrastructure.

Detect whether it is http or tcp or https mode for non-webstream user

Detect whether it is http or tcp or https mode.

Detect whether it is http or https mode

Represents the transport binding element that supports channel security over an SSL stream for use in policy exports.

Gets the that represents the transport token used in the security binding.

An that represents the transport token used in the security binding.

Returns a copy of this binding element instance.

A copy of this binding element instance.

Returns an object of the requested type, if present, from the appropriate layer in the binding stack.

The object of the requested type if found; otherwise, returns null. The binding context that provides context for this binding element.

Describes whether subscribers to a are required to present a security token issued by the Azure Access Control service to the Azure Service Bus service when sending messages.

If specified by a NetEventRelay listener, the client is required to provide a relay access token.

If specified by a NetEventRelay subscriber, the client will not be required to provide a relay access token. This represents an opt-out mechanism with which listeners can waive the Azure Access Control protection on the endpoint and perform their own access control.

Represents the transport security settings of a one-way binding.

Gets or sets the transport security protection level.

Returns a that contains the transport security protection level.

The collection of security settings for a binding.

Gets or sets whether message-level and transport-level security are used by an endpoint configured with a .

Returns a that indicates whether message-level or transport-level security are used by an endpoint. The default value is Transport. The security mode value is not valid.

Gets or sets the authentication type for the relay client.

Returns a that contains the authentication type. The default value is . The value is not a valid field.

Gets the type of transport-level security requirements for an endpoint configured with a . The default value is EncryptAndSign.

Returns a that indicates the type of transport-level security requirements for an endpoint.

Gets the type of message-level security requirements for a service configured with a .

Returns a that indicates the type of message-level security requirements for an endpoint. The default AlgorithmSuite is Basic256, and the default ClientCredentialType is Windows.

Represents a binding that supports one-way event multicasting and allows any number of event publishers and event consumers to rendezvous at the same endpoint.

Initializes a new instance of the class.

Initializes a new instance of the class, using the specified security mode and relay client authentication type.

The type of security used with the SOAP message and for the client. The type of authentication used by the client.

Initializes a new instance of the class, using the specified configuration.

The name of the configuration to use.

Initializes a new instance of the class, using the specified transport, encoding, and security elements.

The transport to use. The encoding to use. The type of security used with the SOAP message and for the client.

Retrieves a value that determines if the specified binding elements match the current instance.

Returns true if the bindings match; otherwise, false. The transport to check against the current instance. The encoding to check against the current instance. The session to check against the current instance.

Applies the settings from the configuration element that corresponds to the specified name to the current instance of this binding element.

The name of the configuration element to take the settings from.

Represents a binding for a secure, one-way connection through the cloud.

Specifies the transport type for the binding.Along with the encoding and security settings, the transport type represents the three core properties of a binding.

Represents the encoding for the binding.Along with the security settings and transport type, the encoding represents the three core properties of a binding.

Initializes a new instance of the class.

Initializes a new instance of the class, using the specified security mode and authentication type.

The security mode. The authentication type.

Initializes a new instance of the class using the specified configuration.

The name of the configuration to use.

Initializes a new instance of the class, using the specified connection and security modes, as well as the authentication type.

The connection mode. The type of security used with the SOAP message and for the client. The type of authentication used by the client.

Initializes a new instance of the class, using the specified transport, encoding, and security.

The transport element containing the core transport settings. The encoding element. The security settings.

Initializes a new instance of the class, using the specified security settings.

The security settings.

Gets or sets a value that indicates whether the hostname is used to reach the service when matching the URI.

Gets or sets the maximum size allowed for a buffer pool that stores messages processed by the binding.

Returns the maximum size allowed for a buffer pool that stores messages processed by the binding. The default value is 65,536 bytes.

Gets or sets a value that specifies the maximum size, in bytes, of the buffer used to store messages in memory.

Returns the maximum size, in bytes, of the buffer used to store messages in memory. The default value is 65,536 bytes.

Gets or sets a value that controls the maximum number of connections to be pooled for subsequent reuse on the client and the maximum number of connections allowed to be pending dispatch on the server.

On the client, returns the maximum number of connections to be pooled for subsequent reuse; on the server, returns the maximum number of connections allowed to be pending dispatch.

Gets or sets the maximum number of queued connection requests that can be pending.

Returns the maximum number of queued connection requests that can be pending. The default is 10.

Gets the message security version.

Returns a that contains the message security version. This currently returns MessageSecurityVersion..::.WSSecurity11WSTrustFebruary2005WSSecureConversationFebruary2005WSSecurityPolicy11.

Gets or sets the maximum size for a received message that is processed by the binding.

Returns the maximum size, in bytes, for a received message that is processed by the binding. The default value is 65,536 bytes.

Gets or sets constraints on the complexity of SOAP messages that can be processed by endpoints configured with this binding.

Returns a instance that specifies the complexity constraints on SOAP messages exchanged. The default values for these constraints are provided in the following Remarks section.

Indicates that incoming requests are handled asynchronously.

Gets the URI scheme for the transport.

Returns the URI scheme for the transport. The default value is “sb”, indicating the Azure Service Bus.

Gets the version of SOAP that is used for messages processed by this binding.

Returns a that contains the envelope version.

Gets an object that specifies the type of security used with services configured with this binding.

Returns a instance that contains the types of security used with this binding. This type contains the message security, the end-to-end security mode, relay client authentication type, and transport security settings.

Applies the settings from the configuration element that corresponds to the specified name to the current instance of this binding element.

The name of the configuration element to take the settings from.

Creates a set of binding elements.

Returns a that contains the binding elements.

Provides a secure, reliable binding suitable for cross-computer communication.

Initializes a new instance of the class.

Initializes a new instance of the class with the type of security used and relay client authentication specified.

The type of security used with the binding. The type of client authentication used on the relay.

Initializes a new instance of the class with the type of security used, the type of client authentication, and a value that indicates whether reliable sessions are explicitly enabled.

The type of security used with the Azure Service Bus binding. The type of client authentication used on the relay. true if reliable sessions are enabled; otherwise, false.

Initializes a new instance of the class with a specified XML configuration.

The configuration to use.

Initializes a new instance of the class with the given transport, encoder, reliable session binding element and type of security used.

The transport binding element to use. The encoding to use. The reliable session binding element. The security binding element.

Gets an object that indicates whether a reliable session is established between Azure Service Bus channel endpoints.

Returns .Indicates whether a WS-RM reliable session is established between channel endpoints. The default is false.

Returns a value that determines whether the specified objects have matching binding elements.

Returns.true if the objects match; otherwise, false. The transport to match. The encoding to match. The session to match.

Applies the settings from the configuration element that corresponds to the specified name to the current instance of this binding element.

The name of the configuration element to take the settings from.

Creates a collection with the binding elements for the binding.

Returns a that contains the ordered stack of binding elements.

Creates the message security token for the current instance.

Returns .Contains the message security token.

Represents the transport-level security settings for the .

Gets or sets the type of client credential to be used for authentication against the proxy.

Returns a that contains the client credential. Setting the property to an undefined value.

The base class for common methods for the binding.

The transport element for the current instance.Along with the encoding and security, the transport setting forms the core properties of a binding.

The encoding element for the current instance.Along with the security and transport settings, the encoding forms the three core properties of a binding.

Initializes a new instance of the class.

Initializes a new instance of the class, using the specified security mode and relay authentication type.

The type of security used with the binding. The type of relay authentication used.

Initializes a new instance of the class, using the specified configuration name.

The binding configuration name.

Initializes a new instance of the class, using the specified transport, encoding, and security.

The transport. The encoding. The security.

Gets or sets the comparison mode used on the hostname.

The comparison mode used on the hostname.

Gets or sets the connection mode: or .

Returns a that contains the connection mode; either or . The default is Relayed.

Gets or sets a value that indicates whether the service configured with the binding uses streamed or buffered (or both) modes of message transfer.

Returns a that indicates whether the service configured with the binding uses streamed or buffered (or both) modes of message transfer. By default, the HTTP, TCP/IP, and named pipe transports use buffered message transfers.

Gets or sets the maximum size allowed for a buffer pool that stores messages processed by the binding.

Returns the maximum size, in bytes, allowed for a buffer pool that stores messages processed by the binding. The default value is 65,536.

Gets or sets a value that specifies the maximum size of the buffer used to store messages in memory.

Returns the maximum size, in bytes, of the buffer used to store messages in memory. The default value is 65,536.

Gets or sets a value that controls the maximum number of connections to be pooled for subsequent reuse on the client and the maximum number of connections allowed to be pending dispatch on the server.

On the client, returns the maximum number of connections to be pooled for subsequent reuse; on the server, returns the maximum number of connections allowed to be pending dispatch.

Gets or sets the maximum number of queued connection requests that can be pending.

Returns the maximum number of queued connection requests that can be pending. The default is 10.

Gets or sets whether the relay binding is dynamic.

true if the relay binding is dynamic; otherwise, false.

Gets the message security version.

Returns a that contains the message security version. This currently always returns MessageSecurityVersion..::.WSSecurity11WSTrustFebruary2005WSSecureConversationFebruary2005WSSecurityPolicy11.

Gets or sets the maximum size for a received message that is processed by the binding.

Returns the maximum size, in bytes, for a received message that is processed by the binding. The default value is 65,536.

Gets or sets constraints on the complexity of SOAP messages that can be processed by endpoints configured with this binding. This property cannot be null.

Returns a that specifies the complexity constraints on soap messages exchanged. The default values for these constraints are provided in the following Remarks section. if ReaderQuotas is null

Indicates that incoming requests are handled asynchronously.

Gets the URI scheme for the transport.

Returns the URI scheme for the transport. The default is “sb”.

Gets the version of SOAP that is used for messages processed by this binding.

Returns a that contains the envelope version used for this binding.

Gets an object that specifies the type of security used with services configured with this binding.

Returns , which contains the types of security used with this binding. The default mode of security is Transport.

Determines whether the specified binding elements match the default values of the binding elements in the current instance.

true if the elements match; otherwise, false. The transport binding element. The encoding binding element.

Applies the settings from the configuration element that corresponds to the specified name to the current instance of this binding element.

The name of the configuration element to take the settings from. Did not find the binding element specified by the input configuration name in the configuration.

Retrieves an ordered collection of binding elements contained in the current binding.

Returns a that makes up the binding.

Creates the security binding element for the current instance.

Returns a that contains the security binding element.

Specifies the types of transport-level and message-level security used by an endpoint configured with a .

Gets or sets whether message-level and transport-level security are used by an endpoint configured with a .

Returns an that indicates whether message-level or transport-level security is used by an endpoint. The default value is Transport. The value is not a valid field.

Gets or sets the relay client authentication type.

Returns a that contains the relay client authentication type. The value is not a valid field.

Gets the type of message-level security requirements for an endpoint configured with a .

Returns a that indicates the type of transport-level security requirements for an endpoint.

Gets the type of message-level security requirements for a service configured with a .

Returns a that indicates the type of message-level security requirements for an endpoint. The default security settings are: a ClientCredentialType of UserName; and an AlgorithmSuite of Basic256.

Describes whether clients of a service are required to present a security token issued by Azure Access Control to the Azure Service Bus when sending messages.

If specified by a listener, the client is required to provide a security token.

If specified by a listener, the client will not be required to provide a security token. This represents an opt-out mechanism with which listeners can waive the Azure Access Control protection on the endpoint.

Represents the binding element for the TCP transport relay.

Initializes a new instance of the class.

Initializes a new instance of the class using the specified relay client authentication type.

The relay client authentication type.

Initializes a new instance of the class using the specified relay binding element.

The element to be cloned.

Gets the connection pool settings for the current instance.

The connection pool settings for the current instance.

Gets or sets the type of authentication used by the service client.

Returns .Contains the authentication type. The default value is RelayAccessToken.

Gets or sets the connection mode.

Returns a that contains the connection mode.

Gets the URI scheme for the transport.

Returns the URI scheme for the transport, which is “TCP”.

Gets or sets whether the binding element is dynamic.

true if the binding element is dynamic; otherwise, false.

If this flag is true, the gateway will add sslstream on it.

Creates a copy of the current binding element.

Returns a that contains a copy of the binding element.

Creates a channel factory that can be used to create a channel.

A channel factory of the specified type. Describes the bindings, behaviors, contracts, and other information required to create the channel factory. The type of channel factory. When Transport protection is enabled and the Connection Mode is set to either Hybrid or Direct.This member is unlikely to be used directly, but may be used when creating a custom binding.For more information, see Creating a Custom AppFabric Service Bus Binding.

Creates a channel listener of the specified type.

A channel listener of the specified type. Describes the bindings, behaviors, contracts, and other information required to create the channel factory. The type of channel factory. When Transport protection is enabled and the Connection Mode is set to either Hybrid or Direct.

Returns a specified object from the binding context.

A binding element that contains the specified object, or null if not found. The context. The type of object to get.

Exports a custom policy assertion about this binding.

The MetadataExporter that you can use to modify the exporting process. The PolicyConversionContext that you can use to insert your custom policy assertion.

Describes the connection mode for the .

All communication is relayed through the Azure Service Bus cloud. The SSL-protected control connection is used to negotiate a relayed end-to-end socket connection that all Client-Service communication flows through. After the connection is established, the Azure Service Bus infrastructure acts much like a socket forwarder proxy relaying a bidirectional byte stream. This mode additionally requires outbound port 819 for the NAT prediction algorithm. With most personal firewall products, the outbound socket connection that is being established by the direct connect mode will also require a one-time policy exception to be granted by the user (the Windows Personal Firewall and other products will typically prompt the user) to the hosting application.

Communication is relayed through the Azure Service Bus infrastructure while the Client and Service endpoints negotiate a direct socket connection to each other. The coordination of this direct connection is governed by the Azure Service Bus cloud service. The direct socket connection algorithm is capable of establishing direct connections between two parties that sit behind opposing Firewalls and NAT devices. The algorithm uses only outbound connections for Firewall traversal and relies on a mutual port prediction algorithm for NAT traversal. Since the NAT traversal algorithm is dependent on a very narrowly timed coordination and a best-guess prediction about the expected NAT behavior, the algorithm tends to have a very high success rate for Home and Small Business scenarios with a small number of clients and degrades in its success rate with larger NATs. If a direct connection can be established, the relayed connection is automatically upgraded to the direct connection without message or data loss. If the direct connection cannot be established, data will continue to flow through the Azure Service Bus Relay. This mode additionally requires outbound port 819 for the NAT prediction algorithm. With most personal firewall products, the outbound socket connection that is being established by the direct connect mode will also require a one-time policy exception to be granted by the user (the Windows Personal Firewall and other products will typically prompt the user) to the hosting application.

Represents the binding element used to specify an HTTPS relay transport for transmitting messages.

Initializes a new instance of the class, using the default settings.

Initializes a new instance of the class, using the specified type of client authentication.

The relay client authentication type.

Initializes a new instance of the class, using the specified element.

The element to be cloned.

Gets the URI scheme for the transport.

The URI scheme for the transport, which is “HTTPS”.

Creates a deep copy of the current binding element.

A deep copy of the current binding element.

Creates a binding element for the inner channel.

A binding element for the inner channel.

Initializes the specified binding element with the settings from the current instance of the binding element.

The binding element to initialize.

Gets the specified property from the specified binding context.

A binding element that contains the property. The binding context.

Represents the binding element used to specify an HTTP transport for transmitting messages on the Azure Service Bus.

Initializes a new instance of the class.

Initializes a new instance of the class using the specified client authentication type.

The client authentication type.

Initializes a new instance of the class, using the specified element to be cloned.

The element to be cloned.

Gets the XML element that represents the transport token used in the security binding.

The transport token used in the security binding.

Gets or sets a value that indicates whether the client accepts cookies and propagates them on future requests.

true if cookies are allowed; otherwise, false. The default is false.

Gets or sets the comparison mode use in the host name.

The comparison mode use in the host name.

Gets or sets a value that indicates whether to make a persistent connection to a service endpoint.

true if the request to the service endpoint should contain a Connection HTTP header with the value Keep-alive; otherwise, false. The default is true.

Gets or sets the maximum size of the buffer to use.

Returns the maximum size, in bytes, of the buffer.

Gets or sets a URI that contains the address of the proxy to use for HTTP requests.

Returns a that contains the address for the proxy. The default value is null.

Gets or sets the authentication scheme used to authenticate client requests being processed by an HTTP proxy.

One of the values of the enumeration that specifies the protocols used for client authentication on the proxy. The default is Anonymous.

Gets or sets the relay client authentication type.

Returns .Contains the authentication type. The default value is RelayClientAuthenticationType.RelayAccessToken

Gets the URI scheme for the transport.

Returns the URI scheme.

Gets or sets the transfer mode.

Returns a that contains the transfer mode.

Gets or sets a value that indicates whether the machine-wide proxy settings are used rather than the user specific settings.

true if the machine-wide proxy settings are used; otherwise, false. The default is true.

Gets or sets whether the binding element is dynamic.

true if the binding element is dynamic; otherwise, false.

Creates a channel factory that can be used to create a channel.

The channel factory of the specified type. The binding context for the channel.

Creates a channel listener for channels of the specified generic type.

A channel listener. The binding context.

Creates a for the inner channel.

A for the inner channel.

Initializes the specified binding element with the settings from the current instance of the binding element.

The binding element to initialize.

Determines whether a channel factory of the specified type can be built.

true if a channel factory can be built; otherwise, false. The binding context for the channel.

Returns a value that indicates whether the binding element can build a listener for a specific type of channel.

true if the IChannelListener<TChannel> of type IChannel can be built by the binding element; otherwise, false. The binding context that provides context for the binding element. context is null.

Returns a copy of the binding element object.

Returns a that contains a deep clone of the original.

Gets the specified property from the specified binding context.

The property from the specified binding context. The binding context.

Exports a custom policy assertion about this binding.

The MetadataExporter that you can use to modify the exporting process. The PolicyConversionContext that you can use to insert your custom policy assertion.

Writes custom Web Services Description Language (WSDL) elements into the generated WSDL for a contract.

The WsdlExporter that exports the contract information. Provides mappings from exported WSDL elements to the contract description.

Writes custom Web Services Description Language (WSDL) elements into the generated WSDL for an endpoint.

The WsdlExporter that exports the contract information. Provides mappings from exported WSDL elements to the contract description.

Represents the transport binding element used for one-way communication.

Initializes a new instance of the class.

Initializes a new instance of the class, using the specified authentication type.

The relay client authentication type. This can be either or .

Initializes a new instance of the class, using the specified authentication type and connection mode.

The relay client authentication type. This can be either or . The connection mode. This can be either or .

Initializes a new instance of the class, using the specified element.

The element to clone.

Gets the connection mode used in this binding element. The connection mode can be one of the enumeration values.

The connection mode used in this binding element.

Gets or sets the maximum number of queued connection requests that can be pending.

The maximum number of queued connection.

Gets or sets the type of Azure Access Control authentication used by this binding element.

Returns a that represents the type of authentication used by this binding element.The default value is .

Gets the connection pool settings for the current instance.

The connection pool settings for the current instance.

Gets or sets the size of the buffer used to transmit a part of the serialized message on the wire from the client or service.

The size of the buffer used to transmit a part of the serialized message on the wire from the client or service.

Gets or sets a value that indicates whether the hostname is used to reach the service when matching the URI.

Gets or sets the maximum size in bytes of the buffer that holds incoming messages that are processed by this binding.

The maximum size in bytes of the buffer that holds incoming messages that are processed by this binding.

Gets or sets the maximum number of pending connections.

The maximum number of pending connections.

Gets or sets the maximum time a channel can be in the initialization status before being disconnected.

The maximum time a channel can be in the initialization status before being disconnected.

Gets or sets the maximum interval of time that a message or a portion of a message can remain buffered in memory before being sent out.

The maximum interval of time that a message or a portion of a message can remain buffered in memory before being sent out.

Gets or sets the maximum number of pending asynchronous accept threads that are available for processing incoming connections on the service.

The maximum number of pending asynchronous accept threads that are available for processing incoming connections on the service.

Gets the URI scheme used by this binding element.

The URI scheme used by this binding element. The value returned is “sb”.

Creates a channel factory for creating channels of the specified type and that is initialized from the specified binding context.

A channel factory for creating channels of the specified type and that is initialized from the specified binding context. The binding context that provides context for the binding element.

Creates a channel listener that accepts channels of the specified type and that is initialized from the specified binding context.

A channel listener that accepts channels of the specified type and that is initialized from the specified binding context. The binding context that provides context for the binding element.

Returns a value that indicates whether this binding element can build a channel factory of the specified type.

true if a channel factory can be built; otherwise false. The binding context that provides context for this binding element.

Returns a value that indicates whether the binding element can build a channel listener for the specified type of channel.

true if a channel listener can be built for the specified type of channel; otherwise, false. The binding context that provides context for this binding element.

Returns a copy of this instance of the binding element.

A binding element that contains a deep clone of this binding element.

Returns an object of the requested type, if present, from the appropriate layer in the binding stack.

The object of the requested type if found; otherwise, returns null. The binding context that provides context for this binding element.

Exports a custom policy assertion about this binding.

The MetadataExporter that you can use to modify the exporting process. The PolicyConversionContext that you can use to insert your custom policy assertion.

Represents the different types of one-way connections available through the Azure Access Control.

Specifies that only one service application can listen on a given endpoint. Used by .

Specifies that multiple service applications may listen on a given endpoint. Used by .

Determines the security settings for an Azure Service Bus binding and describes the security relationship between the client and the service endpoint.

Security is disabled.

Security is provided using a transport security, typically SSL.

Security is provided using SOAP message security.

A secure transport (for example, HTTPS) provides integrity, confidentiality, and authentication while SOAP message security provides client authentication.

Provides authentication token for the service bus.

Retrieves a token when the provider begins.

The provider in which the token will be applied. The action. The duration. The callback. The state of the operation. The asynchronous result of the operation.

Retrieves a web token when the provider begins.

The provider in which the web token will be applied. The action. The duration. The callback. The state of the operation. The asynchronous result of the operation.

Retrieves a token when the provider ends.

The result of the operation. The duration for the provider to store data. The retrieved token.

Retrieves a web token when the provider ends.

The result of the operation. The duration for the provider to store data. The retrieved token.

Builds a key for the provider.

The provider in which the key will be applied. The action. A Key.

Applies normalization into the token provider.

The token provider where the normalization will be applied. The normalized token provider.

Enumerates the token scope for the service bus.

The namespace.

The entity.

Specifies an enumeration of relay type.

The relay is None.

The NetTcp relay.

The HTTP relay.

The NetEvent relay.

The NetOneway relay.

Represents an implementation of a retry policy. For each time the messaging operation must be retried, the delay between retries grows in a staggered, exponential manner.

The retry policy will honor the following aspect: the policy always honor the so that retry will terminate if the next retry interval will exceed the operation time. the policy only retry when is true. the policy should delay further by an additional 10 seconds if exception is a

Initializes a new instance of the class.

The minimum back off value to wait. This value must not be greater than or equal to , otherwise operations might not be able to retry. The maximum back off value to wait. This value must not be greater than or equal to the value, otherwise operations might not be able to retry. The maximum number of times the retry policy instance calculates the retry time interval. If the number of retries exceeds this value, the retry terminates, even if there is some remaining operation time.

Initializes a new instance of the class.

The minimum back off value to wait. This value must not be greater than or equal to , otherwise operations might not be able to retry. The maximum back off value to wait. This value must not be greater than or equal to the value, otherwise operations might not be able to retry. The backoff interval associated with the retry. The termination time buffer associated with the retry. The maximum number of times the retry policy instance calculates the retry time interval. If the number of retries exceeds this value, the retry terminates, even if there is some remaining operation time.

Gets or sets the minimum backoff interval.

The minimum backoff interval.

Gets or sets the maximum backoff interval.

The maximum backoff interval.

Gets or sets the backoff interval associated with the retry.

The backoff interval associated with the retry.

Gets or sets the termination time buffer associated with the retry.

The termination time buffer associated with the retry.

Gets or sets the maximum number of allowed retries.

The maximum number of allowed retries.

Creates a new copy of this instance.

The created new copy of this instance.

Represents a retry policy that performs no retries.

Creates a copy of this instance.

The created copy of this instance.

Represents an abstraction for retrying messaging operations. Users should not implement this class, and instead should use one of the provided implementations.

Gets an instance of the retry policy, which effectively disables retries. Each time this property is accessed, a new instance is returned.

A retry policy that performs no retries.

Gets an instance of the retry policy, which provides a default setup of exponentially increasing retry intervals for messaging operations. Each time this property is accessed, a new instance is created.

The default policy associated with the policy. This property is effectively creating the following instance. var policy = new RetryExponential( TimeSpan.Zero, TimeSpan.FromSeconds(30), 10); It is important to note that the retry policy should always honor the so that retry will terminate if the next retry interval will exceed the operation time.

Creates a new copy of the current and clones it into a new instance.

A new copy of .

Calculates the retry interval for the retry policy.

The remaining time. The total number of retries. The retry interval. If this method returns true, the retry operation occurs after the thread becomes idle for an amount of time equal to .

Determines whether it is permissible to retry after the specified exception.

The latest occurred exception. If this method returns false, no retry occurs. Otherwise, the method determines when to retry.

Represents the shared access signature token.

Specifies the maximum length of the key name.

Specifies the maximum length of the key.

Specifies the shared access signature.

Specifies the signed resource.

Specifies the signature token.

Specifies the signed key name.

Specifies the signed expiry of the token.

Specifies the full field name of the signed resource.

Specifies the key value separator for shared access signature token.

Specifies the pair separator for shared access signature token.

Initializes a new instance of the class with specified token string, expiry and audience.

The token string. The token expiry. The token audience.

Initializes a new instance of the class with specified token string and expiry.

The token string. The token expiry.

Initializes a new instance of the class with specified token string.

The token string.

Initializes a new instance of the class with specified identifier and token string.

The token identifier. The token string.

Gets the audience field name.

The audience field name.

Gets the value that expires on field name.

The value that expires on field name.

Gets the key value separator.

The key value separator.

Gets the pair separator associated with the token.

The pair separator associated with the token.

Represents the shared access signature associated with the token provider.

The epoch time.

Gets whether the token provider strips query parameters.

true if the token provider strips query parameters; otherwise, false.

Executes upon calling the BeginGetToken method.

The URI which the access token applies to. The request action. The time span that specifies the timeout value for the message that gets the security token. An AsyncCallback delegate that references the method to invoke when the operation is complete. A user-defined object that contains state information about the asynchronous operation. The result of the operation.

Executes upon calling the BeginGetWebToken method.

The URI which the access token applies to. The request action. The time span that specifies the timeout value for the message that gets the security token. An AsyncCallback delegate that references the method to invoke when the operation is complete. A user-defined object that contains state information about the asynchronous operation. The result of the operation.

Executes upon calling the EndGetToken method.

An IAsyncResult object that references the asynchronous operation to get a token. When this method returns, contains the expiration date and time of the token information in the cache. The object.

Executes upon calling the EndGetWebToken method.

An IAsyncResult object that references the asynchronous operation to get a web token. When this method returns, contains the expiration date and time of the token information in the cache. The String that represents the web token.

Generates a key for the token provider.

The URI which the access token applies to. The request action. A generated key for the token provider.

Returns the shared access signature associated with the specified key name, SAS key, resource, and token time-to-live.

The key name. The SAS key name. The resource. The TTL value for the token. Returns .

This method assumes UTF8 encoding is being used.

Represents a class to use to read and to write , , and objects as XML.

Specifies an instance of the class.

Initializes a new instance of the class.

Constructor.

A SecurityTokenSerializer to wrap. Typically the default WCF serializer

Determines whether this serializer can read the <KeyIdentifier> element referred by the specified XML reader.

An to read the key identifier clause. true when the specified <KeyIdentifier> element can be read; otherwise, false.

Determines whether this serializer can read the <KeyIdentifier> element referred by the specified XML reader.

An to read the key identifier. true when the specified <KeyIdentifier> element can be read; otherwise, false.

Determines whether this serializer can read the security token pointed at by the specified XML reader.

An to read the security token. true when the security token can be read; otherwise, false.

Determines whether this serializer can write the specified key identifier clause.

true when this serializer can write the specified key identifier clause; otherwise, false. A that represents the key identifier clause to write.

Determines whether this serializer can write the specified key identifier.

true when this serializer can write the specified key identifier; otherwise, false. A that represents the key identifier to write.

Determines whether this serializer can write the specified security token to XML.

true when the security token can be written; otherwise, false. The to convert to XML.

Reads the key identifier clause using the specified XML reader.

An to read the key identifier clause. A that represents the key identifier that is read.

Reads the key identifier using the specified XML reader.

An to read the key identifier. A that represents the key identifier that is read.

Reads the or the security token pointed at by the specified XML reader.

A that represents the SimpleWebSecurityToken or the security token that is read. An to read the SimpleWebSecurityToken or the security token. A that determines the security token type. The encoding of the XML element is not base64Binary.

Writes the specified key identifier clause using the specified XML writer.

An used to write the key identifier clause. A that represents the key identifier clause to write.

Writes the specified key identifier using the specified XML writer.

An used to write the key identifier. A that represents the key identifier to write. The binary token content is null.

Writes the specified or security token using the specified XML writer.

An used to write the SimpleWebSecurityToken or security token. The SimpleWebSecurityToken or security token to write.

A security token that wraps a Simple Web Token.

Initializes a new instance of the class.

A string that represents the Simple Web Token. The expiry date of the simple web token. The audience for the simple web token.

Initializes a new instance of the class with the specified Simple Web Token and expiry date.

A string that represents the Simple Web Token. The expiry date of the simple web token.

Initializes a new instance of the class with the specified Simple Web Token.

A string that represents the Simple Web Token.

Initializes a new instance of the class with the specified token ID and Simple Web Token.

A unique identifier for the Simple Web Token. A string that represents the Simple Web Token. The parameter or parameter is null.

Gets the audience for the simple web token.

The audience for the simple web token.

Gets the date and time the security token will expire.

The date and time the security token will expire.

Gets the field name associated with the token expiration.

The field name associated with the token expiration.

Gets the audience field name.

The audience field name.

Gets the key value separator associated with the token.

The key value separator associated with the token.

Gets the pair separator associated with the token.

The pair separator associated with the token.

Gets the ID associated with the Simple Web Token.

The ID associated with the Simple Web Token.

Gets the cryptographic keys associated with the security token.

A of type that contains the set of keys associated with the Simple Web Token.

Not implemented.

Throws a .

Not implemented.

Throws a .

Gets the Simple Web Token.

The Simple Web Token.

Provides constants that represent parameter names, field names, method names, and delimiters that are used in authentication requests.

The character used to delimit the list of values for a compound token.

The character used to separate parameters sent in HTTP authentication requests.

The string used to represent the POST verb in an HTTP request.

The string used to represent the GET verb in an HTTP request.

The string used to represent the HEAD verb in an HTTP request.

The string used to represent the TRACE verb in an HTTP request.

The default issuer name string value used to gain access to the Windows Azure Access Control management service.

The default SAS key string value.

The maximum size of the issuer name.

The maximum size of the issuer secret key.

The issuer ID for all output claims from the Azure Access Control service.

The default issuer name string value used to gain access to Azure Service Bus.

The name of the AppliesTo field that is in the token request body that is sent to the Azure Access Control service.

The parameter name for the requested token lifetime(measured in seconds) that is sent in the token request using the WRAP protocol.

The parameter name for the access token that is returned in the response by the Security Token Service using the WRAP protocol.

The parameter name for the WRAP assertion that is sent in the token request using the WRAP protocol.

The parameter name for the assertion format that is sent in the token request using the WRAP protocol.

The WRAP authentication protocol type name.

The parameter name of the access token that is sent in the authorization header of a request to Azure Service Bus.

The base date and time used in the WRAP protocol.

The parameter name for the account name that is sent in the token request using the WRAP protocol.

The parameter name for the account password that is sent in the token request using the WRAP protocol.

The content type used for formatting token request parameters when using the WRAP protocol.

Specifies the Security Assertion Markup Language format.

Specifies the Simple Web Token format.

The parameter name for the token expiration (measured in seconds) that is returned in the token response by the token issuer using the WRAP protocol.

The value of the ConfirmationMethod attribute used in a Security Assertion Markup Language(SAML) bearer assertion.

The token audience attribute name that is used in a Simple Web Token (SWT). The token audience is the SWT processor that the SWT is intended for.

The attribute name for the token expiration (measured in seconds) used in a Simple Web Token.

The attribute name for the Simple Web Token (SWT) issuer.

The attribute name of the hash-based message authentication code used in a Simple Web Token.

The attribute name for the tracking ID in the returned token response.

The character used to separate parameters in a token request.

A character designating the separation between a key and a value.

Provides a set of methods that execute asynchronous simple Web token (SWT) retrieval operations.

Generates a key for the simple web token provider.

The URI which the access token applies to. The request action. A generated key for the simple web token provider.

Executes the begin get token action.

The URI which the access token applies to. The request action. The time span that specifies the timeout value for the message that gets the security token. An delegate that references the method to invoke when the operation is complete. A user-defined object that contains state information about the asynchronous operation. An object that references the asynchronous operation to get a token.

Executes the begin get web token action.

The URI which the access token applies to. The request action. The time span that specifies the timeout value for the message that gets the security token. An delegate that references the method to invoke when the operation is complete. A user-defined object that contains state information about the asynchronous operation. An object that references the asynchronous operation to get a web token.

Executes the end get token action.

An object that references the asynchronous operation to get a token. When this method returns, contains the expiration date and time of the token information in the cache. The security token.

Executes the end get web token action.

An object that references the asynchronous operation to get a web token. When this method returns, contains the expiration date and time of the token information in the cache. The web token.

Provides a set of methods that execute asynchronous SAML token retrieval operations.

Generates a key for the token provider.

The URI which the access token applies to. The request action. A generated key for the token provider.

Executes the begin get token action.

The URI which the access token applies to. The request action. The time span that specifies the timeout value for the message that gets the security token. An delegate that references the method to invoke when the operation is complete. A user-defined object that contains state information about the asynchronous operation. An object that references the asynchronous operation to get a token.

Executes the begin get web token action.

The URI which the access token applies to. The request action. The time span that specifies the timeout value for the message that gets the security token. An delegate that references the method to invoke when the operation is complete. A user-defined object that contains state information about the asynchronous operation. An object that references the asynchronous operation to get a web token.

Executes the end get token action.

An object that references the asynchronous operation to get a token. When this method returns, contains the expiration date and time of the token information in the cache. The security token.

Executes the end get web token action.

An object that references the asynchronous operation to get a web token. When this method returns, contains the expiration date and time of the token information in the cache. The web token.

Provides methods that return name/value pairs for web token assertions, and that execute asynchronous shared secret token retrieval operations.

Generates a key for the token provider.

The URI which the access token applies to. The request action. A generated key for the token provider.

Returns a string of URL encoded name/value pairs for a simple web token assertion using the specified issuer name and issuer secret.

The issuer name. The issuer secret. A URL encoded name/value pairs for a simple web token assertion.

Returns a string of URL encoded name/value pairs for a simple web token assertion using the specified issuer name and issuer secret.

The issuer name. The issuer secret. A URL encoded name/value pairs for a simple web token assertion.

Executes the begin get token action.

The URI which the access token applies to. The request action. The time span that specifies the timeout value for the message that gets the security token. An delegate that references the method to invoke when the operation is complete. A user-defined object that contains state information about the asynchronous operation. An object that references the asynchronous operation to get a token.

Executes the begin get web token action.

The URI which the access token applies to. The request action. The time span that specifies the timeout value for the message that gets the security token. An delegate that references the method to invoke when the operation is complete. A user-defined object that contains state information about the asynchronous operation. An object that references the asynchronous operation to get a web token.

Executes the end get token action.

An object that references the asynchronous operation to get a token. When this method returns, contains the expiration date and time of the token information in the cache. The security token.

Executes the end get web token action.

An object that references the asynchronous operation to get a web token. When this method returns, contains the expiration date and time of the token information in the cache. The web token.

The message security on a one-way connection over the Azure Service Bus relay.

Gets or sets the type of client credential the client uses to authenticate itself to the service at the SOAP level.

Returns a that contains the credential type. The default is Certificate. The value of is not a valid .

Gets or sets the algorithm suite to be used for securing messages at the SOAP level.

Returns an containing the algorithm suite. The default is Basic256, which specifies 256-bit Advanced Encryption Standard (AES) as the symmetric encryption algorithm. The value of the is null.

Enables setting message-level security properties on the binding.

Specifies the type of client credential used for client authentication.

Returns a that contains the algorithm suite. The default is Basic256.

Gets or sets a value that indicates whether the service credential is provisioned at the client out of band or is obtained from the service through a process of negotiation.

Returns true if service credential is obtained through a process of negotiation; otherwise, false. The default is true.

Specifies the algorithm suite used for security messages at the SOAP level.

Returns .

Only used in extensibility scenarios to indicate whether an instance of a class derived from is configured to perform secure conversation.

Always returns true, unless overridden in a derived class.

Describes the message security on a relay connection for a binding.

Gets or sets the type of client credential used for client authentication.

Returns a that contains the credentials. The default is Windows.

Sets or gets the algorithm suite used for Message Security at the SOAP level.

Returns a that contains the algorithm suite. The default value is Base256.

Enables setting message-level security properties for a WS-Http relay binding.

Gets or sets a value that specifies whether a security context token is established.

true if the security context token is established; otherwise, false.

Gets a value indicating whether secure conversation is enabled.

Represents an exception regarding the token provider for the Service Bus.

Initializes a new instance of the class.

The exception message. The error that caused the exception.

Represents the token provider for the service bus.

Retrieves a token when the provider service was started.

The object where the token will be applied. The action. The duration of the operation. The argument fir the provider. The state of the provider. The result of the operation.

Retrieves a web token when the provider service was started.

The object where the token will be applied. The action. The duration of the operation. The argument fir the provider. The state of the provider. The result of the operation.

Retrieves a token when the provider service was stopped.

The result of the operation. The specified duration of time for the provider to store data. The retrieved token.

Retrieves a web token when the provider service was stopped.

The result of the operation. The specified duration of time for the provider to store data. The retrieved web token.

Generates a key for the token provider.

The URI which the access token applies to. The request action. A generated key.

Returns the normalize URI form of the target address.

The URI which the normalization applies to. The normalize URI form for the target address.

Contains the settings for the Azure Service Bus registry.

true if transport protection is enabled; otherwise, false. The default value is true.

true if the endpoint allows for unauthenticated access; otherwise, false. The default value is false.

Initializes a new instance of the class.

Initializes a new instance of the class using the specified discovery type.

The discovery type that indicates whether the endpoint is public or private.

Gets or sets how the service is discovered.

Returns .DiscoveryType.Public for discovery to be public; DiscoveryType.Private for discovery to be private. The default value is DiscoveryType.Private.

Gets or sets the display name for the endpoint.

Returns .Contains the display name.

Passes data at runtime to bindings to support custom behavior.

The endpoint to modify. The objects that binding elements require to support the behavior.

This implementation does nothing.

The endpoint that is to be customized. The client runtime to be customized.

This implementation does nothing.

The endpoint that is to be customized. The endpoint dispatcher to be modified or extended.

This method does nothing.

The endpoint this behavior applies to.

Describes the publishing behavior of a service in the Service Registry.

The Service will be published in the Service Registry.

The service will not be published in the Service Registry.

Describes the role for socket security.

Identifies the application as an SSL server, meaning that the application will accept only a secure transport connection.

The application is identified as an SSL client, meaning the application will attempt to connect and send messages using an encrypted channel.

When set on a client, the application will send unencrypted messages. When set on a server, the application will accept both encrypted and unencrypted messages.

Check SSL certificate

The HTTP WebRequest The certificate from service The chain The error True if having the same DNS suffix

Provides properties that control authentication parameters and protection level for the TCP transport relay binding.

Gets or sets the transport protection level.

Returns a that contains the protection level. The default is EncryptAndSign.

A binding used to configure endpoints for Web services that are exposed through HTTP requests instead of SOAP messages.

Initializes a new instance of the class.

Initializes a new instance of the class using the specified configuration name.

The configuration to use.

Initializes a new instance of the class using the specified type of security and relay client authentication.

The type of security used with the binding. The type of client authentication used on the relay.

Gets or sets a value that specifies whether cookies are allowed in the messages sent via the .

Returns true if cookies are allowed; otherwise, false. The default value is false.

Gets or sets the content type mapper.

The content type mapper.

Gets the SOAP envelope version.

Returns a . Since the does not use SOAP, this always returns EnvelopeVersion.None. is not likely the binding you should be using for SOAP messaging. However, Service Bus does support SOAP.

Gets or sets the comparison mode used on the host name.

The comparison mode used on the host name.

Gets or sets the maximum buffer pool size used by the transport.

Returns the maximum buffer pool size. The default is 524288 bytes.

Gets or sets the maximum buffer size supported by the transport.

Returns the max buffer size.

Gets or sets the maximum allowable message size that can be received.

Returns the maximum allowable message size. The default size is 65,536 bytes.

Gets or sets a URI that contains the address of the proxy to use for HTTP requests.

Returns a that contains the address of the proxy to use for HTTP requests. The default value is null.

Gets or sets xml reader quotas on the messages processed.

Returns a that contains the reader quotas.

Gets the scheme for the endpoints used with the binding.

Returns the scheme.

Gets the security settings for the current instance.

Returns a that contains the security settings.

Gets or sets the transfer mode.

Returns a that contains the transfer mode. The default is Buffered.

Gets or sets a value that indicates whether the machine-wide proxy settings are used rather than the user specific settings.

true if machine-wide proxy settings are used. Otherwise false. The default setting is true.

Gets or sets the character encoding that is used to write the message text.

Returns a that contains the encoding. The default value is utf8encoding.

Gets or sets whether the relay binding is dynamic.

true if the relay binding is dynamic; otherwise, false.

Indicates that incoming requests are handled asynchronously.

Creates a collection with the binding elements for the binding.

Returns a that contains the ordered stack of binding elements used by the .

Specifies the types of security available to a service endpoint configured to receive HTTP requests.

Gets or sets the mode of security that is used by an endpoint configured to receive HTTP requests with a .

Returns a that indicates whether transport-level security, credential only, or no security is used by an endpoint. The default value is None. The value is not a valid EndToEndWebHttpSecurityMode.

Gets or sets the relay client authentication type used by the service client.

Returns a that contains the relay client authentication type. The default value is RelayClientAuthenticationType.RelayAccessToken.

Gets or sets the Transport-level security settings for a binding.

Returns a that contains the binding. The default values set are a ClientCredentialType of None, a ProxyCredentialType of None, and Realm = "".

Specifies the types of security that can be used with the .

Indicates that no security is used with HTTP requests.

Indicates that transport-level security is required; clients must use HTTPS to communicate with the service endpoint.

Represents an interoperable binding that derives from and provides support for the updated versions of the Security, ReliableSession, and TransactionFlow binding elements.

Initializes a new instance of the class with a binding specified by its configuration name.

The binding configuration name for the

Initializes a new instance of the class with a specified type of security used by the binding.

Initializes a new instance of the class with a specified type of security and relay client authentication used by the binding.

The security mode that specifies the type of security that is used with the SOAP message and for the client. The type of authentication used by the client.

Initializes a new instance of the class with a specified type of security used by the binding, the specified authentication for the client relay, and a value that indicates whether a reliable session is enabled.

Specifies the type of security that is used with the SOAP message and for the client. The type of authentication used by the client. true if a reliable session is enabled; otherwise, false.

Retrieves the security binding element from the current binding.

Returns a that contains the current security binding element.

Represents an interoperable binding that supports distributed transactions and secure, reliable sessions through the cloud.

Gets or sets a value that indicates whether the client accepts cookies and propagates them on future requests.

Returns .true if the binding allows cookies; otherwise, false. The default is false.

Gets the security settings used with this binding.

Returns a that contains the security used with this binding. The default value Mode property is Message.

Returns the transport binding element from the current binding.

Returns .Contains the transport binding element from the current binding.

Returns the security binding element from the current binding.

Returns a that contains the current binding.

Provides the base class with members common to the .

Initializes a new instance of the class.

Initializes a new instance of the class with a value that indicates whether a reliable session is enabled.

true, if a reliable session is enabled; otherwise, false.

Gets or sets the comparison mode used on the host name.

The comparison mode used on the host name.

Gets or sets the maximum amount of memory allocated for the buffer manager that manages the buffers required by endpoints using this Azure Service Bus binding.

Returns .The maximum size, in bytes, for the pool of buffers used by an endpoint configured with this binding. The default value is 65,536 bytes.

Gets or sets the maximum size for a message that can be processed by the Azure Service Bus binding.

Returns .The maximum size, in bytes, for a message that is processed by the Azure Service Bus binding. The default value is 65,536 bytes.

Gets or sets whether MTOM or Text/XML is used to encode SOAP messages.

Returns .Indicates whether MTOM or Text/XML is used to encode SOAP messages. The default value is Text/XML.

Gets or sets the URI address of the HTTP proxy.

Returns .Serves as the address of the HTTP proxy. The default value is null.

Gets or sets constraints on the complexity of SOAP messages that can be processed by endpoints configured with this Security Bus binding.

Returns .Specifies the complexity constraints.

Gets an object that provides convenient access to the properties of a reliable Azure Service Bus session binding element that are available when using one of the system-provided bindings.

Returns .Provides convenient access to the properties of a reliable Azure Service Bus session binding element that are available when using one of the system-provided bindings.

Gets the URI transport scheme for the channels and listeners that are configured with this binding.

Returns that represents the URI transport scheme.

Gets the version of SOAP that is used for messages that are processed by this binding.

Returns .The value of the envelope version that is used with this Azure Service Bus binding. The value is always SOAP 1.2.

Gets or sets the character encoding that is used for the message text.

The character encoding that is used for the message text.

Gets or sets a value that indicates whether the auto-configured HTTP proxy of the system should be used, if available.

true if the auto-configured HTTP proxy of the system should be used, if available; otherwise, false.

Gets or sets whether the relay binding is dynamic.

true if the relay binding is dynamic; otherwise, false.

Indicates that incoming requests are handled asynchronously.

Returns an ordered collection of binding elements contained in the current Azure Service Bus binding.

Returns .Contains the objects for the binding.

When implemented in a derived class, returns the transport binding element from the current Azure Service Bus binding.

Returns .Contains the transport binding element from the current Azure Service Bus binding.

When implemented in a derived class, returns the security binding element from the current Azure Service Bus binding.

Returns .Contains the security binding element from the current Azure Service Bus binding.

Represents the security settings for the .

Specifies the message security mode for this Azure Service Bus binding.

Returns .Contains the security mode for this Azure Service Bus binding. The default is Transport.

Gets or sets the authentication type required for the service application or client application to provide to the Azure Service Bus.

The authentication type required for the service application or client application to provide to the Azure Service Bus. The default is .

Gets an object that contains the transport-level security settings for this Azure Service Bus binding.

Returns .Contains the transport security for this item. The default value includes a ClientCredentialType of None and a ProxyCredentialType of None.

Gets the message-level security settings for this Azure Service Bus binding.

Returns .Contains the security settings. The default value includes: EstablishSecurityContext with default set to true, ClientCredentialType is Windows, AlgorithmSuite is Basic256, and NegotiateServiceCredential is true.

Check SSL certificate

The HTTP WebRequest The certificate from service The chain The error hostName True if having the same DNS suffix

Describes the types of protection on a transport relay.

Security is disabled.

The service application must have security; a client application is not required to have any.

Both the service application and client application must have security.

Holds the connectivity settings effective for all Azure Service Bus-based endpoints that are active in the current application domain.

Contains the for the current instance.

Initializes a new instance of the class.

Gets or sets the connectivity mode for the current application domain.

Returns .Contains the connectivity mode.

Gets a value that determines if the connectivity settings are read-only.

true if the connectivity settings are read-only; otherwise, false.

Sets the underlying wire-level protocol used to communicate with Service Bus.

The connectivity mode differs from the protocol that the service specifies for client communication. The transport type is determined by the binding used. No matter which you select (NetMessaging or AMQP), the communication occurs over the selected connectivity mode. For example, you can have AMQP occur over TCP or HTTP(S).

HTTP mode. Listeners attempt an HTTP connection followed by an HTTPS connection with the Service Bus service, then wait for messages. This might allow you to more easily work around TCP port constraints.

TCP mode. Listeners create TCP connections to the Service Bus service to a destination port in the range 9350 to 9354.

Auto-detect mode (default). Automatically selects between the TCP, HTTP and HTTPS modes based on an auto-detection mechanism that probes whether either connectivity option is available for the current network environment. If both are available, the system will choose TCP by default.

HTTPS mode. Listeners attempt an HTTPS connection with the Service Bus service, then wait for messages.

The exception that occurs when an authorization attempt fails.

Enumerates the possible causes of failure during authorization attempts.

Specifies that the error is generic.

Specifies that the token is missing.

Specifies that the token is malformed.

Specifies that the signature is invalid.

Specifies that the audience is invalid.

Specifies that the token has expired.

Specifies that the claim is invalid.

Specifies that the audience is missing.

Specifies that the 'expires on' date is missing.

Specifies that the issuer is missing.

Specifies that the signature is missing.

Specifies that the token isn't valid yet.

Specifies that the issuer is invalid.

Specifies that the lifetime is invalid.

Gets or sets the error code that describes the cause of authorization attempt failure.

One of the values of the enumeration.

Populates a object with the data needed to serialize the target object.

The object to populate with data. The destination (see ) for this serialization.

The exception that is thrown when an invalid request occurs.

Initializes a new instance of the class.

Initializes a new instance of the class using the specified message.

The message that describes the error.

Initializes a new instance of the class using the specified message and inner exception.

The error message that explains the reason for the exception. The exception that is the cause of the current exception, or null if no inner exception is specified.

Initializes a new instance of the class using the specified information and context.

Holds the serialized object data about the exception being thrown. Contains contextual information about the source or destination.

An exception that is thrown by the Azure Service Bus when an error occurs while processing a request.

Initializes a new instance of the class.

Initializes a new instance of the class with the specified error message.

The error message that describes this exception.

Initializes a new instance of the class with the specified error message and inner exception.

The error message that describes this exception. The exception that caused the current exception to be thrown.

Initializes a new instance of the class with the specified serialization information and streaming context.

Holds the serialized object data about the exception being thrown. The contextual information about the source or destination.

Convert an outbound SOAP message to a corresponding HTTP message

the SOAP message to convert from content type of the SOAP message ("text/xml" for SOAP 1.1 and "application/soap+xml" for SOAP 1.2) the converted HTTP message

Determine if a message is a SOAP 1.2 message

the message to check true if the message is SOAP 1.2

Determine if a message is a SOAP 1.1 message

the message to check true if the message is SOAP 1.1

Parse Http headers from a string that matches the HTTP Header Protocol format: Header1: Header1Value\r\n Header2: Header2Value\r\n

Convert a WebHeaderCollection/NameValueCollection of HTTP Headers into a protocol string with the format: Header1: Header1Value\r\n Header2: Header2Value\r\n This is a clone of WebHeaderCollection.ToString() which gives this nice output but isn't documented as such and therefore it could potentially change.

Gets the TCP endpoint to rendezvous with. If the server provided an IPv4 Address then the returned value will be an IPEndPoint. If no IPv4 address only instance DNS was provided then the value will be a DnsEndPoint.

Gets the HTTP endpoint to rendezvous with. If the server provided an instance DNS name then this will be a DnsEndPoint like { Host="g0-prod-sn1-001-sb.servicebus.windows.net", Port=80 }. If no instance DNS was provided then the value will be an IPEndpoint (IPv4).

Gets the HTTPS endpoint to rendezvous with. If the server provided an instance DNS name then this will be a DnsEndPoint like { Host="g0-prod-sn1-001-sb.servicebus.windows.net", Port=443 }. If no instance DNS was provided then the value will be an IPEndpoint (IPv4).

Represents a security token provider with built-in factory methods returning some well-known token providers.

Initializes a new instance of the class.

true if new security tokens are being cached; otherwise, false. true if web token is supported by this provider; otherwise, false.

Initializes a new instance of the class.

true if new security tokens are being cached; otherwise, false. true if web token is supported by this provider; otherwise, false. The token scope associated with the provider.

Initializes a new instance of the class.

true if new security tokens are being cached; otherwise, false. true if web token is supported by this provider; otherwise, false. The size of the cache. The token scope associated with the provider.

Gets or sets the token scope associated with the provider.

The token scope associated with the provider.

Gets or sets a value that indicates whether new security tokens are being cached.

true if new security tokens are being cached; otherwise, false.

Gets or sets the size of the cache.

The size of the cache.

Gets or sets a value that indicates whether web token is supported by this provider.

true if web token is supported by this provider; otherwise, false.

Gets whether the token provider strips query parameters.

true if the token provider strips query parameters; otherwise, false.

Clears the token provider.

Creates a SAML token provider with the specified SAML token.

The string that represents the SAML token. The for returning SAML token.

Creates a SAML token provider with the specified SAML token and URI of the Security Token Service (STS).

The string that represents the SAML token. The URI of the Security Token Service (STS). The for returning SAML token.

Creates a SAML token provider with the specified SAML token, URI of the Security Token Service (STS) and cache size.

The string that represents the SAML token. The URI of the Security Token Service (STS). The size of the cache. The for returning SAML token.

Creates a SAML token provider with the specified SAML token and scope.

The string that represents the SAML token. The token scope associated with the provider. The for returning SAML token.

Creates a SAML token provider with the specified SAML token, URI of the Security Token Service (STS) and token scope.

The string that represents the SAML token. The URI of the Security Token Service (STS). The token scope associated with the provider. The for returning SAML token.

Creates a SAML token provider with the specified SAML token, URI of the Security Token Service (STS), cache size and token scope.

The string that represents the SAML token. The URI of the Security Token Service (STS). The size of the cache. The token scope associated with the provider. The for returning SAML token.

Creates a URL that grants access to the token provider with the specified shared access signature.

The shared access signature. Returns .

Creates a URL that grants access to the token provider with the specified key name and shared access key.

The key name. The shared access key. The created URL that grants access to token provider.

Creates a URL that grants access to the token provider with the specified key name, shared access key and token time to live.

The key name. The shared access key. The time for which the operation remains valid. The created URL that grants access to token provider.

Creates a URL that grants access to the token provider with the specified key name, shared access key and token scope.

The key name. The shared access key. The token scope associated with the provider. The created URL that grants access to token provider.

Creates a URL that grants access to the token provider.

The key name. The shared access key. The time for which the operation remains valid. The token scope associated with the provider. The created URL that grants access to token provider.

Creates a shared secret token provider.

The issuer name. The issuer secret. The for returning shared secret token.

Creates a shared secret token provider.

The issuer name. The issuer secret. The URI of the Security Token Service (STS). The for returning shared secret token.

Creates a shared secret token provider.

The issuer name. The issuer secret. The for returning shared secret token.

Creates a shared secret token provider.

The issuer name. The set of issuer secret. The URI of the Security Token Service (STS). The for returning shared secret token.

Creates a shared secret token provider.

The issuer name. The issuer secret. The token scope associated with the provider. The created token provider.

Creates a shared secret token provider.

The issuer name. The issuer secret. The URI of the Security Token Service (STS). The token scope associated with the provider. The created token provider.

Creates a shared secret token provider.

The name of the issuer. The set of issuer secret. The token scope associated with the provider. The created token provider.

Creates a shared secret token provider.

The issuer name. The set of issuer secret. The Security Token Service's endpoint Uri. The token scope associated with the provider. The created token provider.

Creates a simple web token provider.

The string that represents the simple web token. The for returning simple web token.

Creates a simple web token provider.

The string that represents the simple web token. The URI of the Security Token Service (STS). The for returning simple web token.

Creates a simple web token provider.

The string that represents the simple web token. The token scope associated with the provider. The created simple web token provider.

Creates a simple web token provider.

The string that represents the simple web token. The URI of the Security Token Service (STS). The token scope associated with the provider. The created simple web token provider.

Creates a windows token provider.

The URIs of the Security Token Service (STS). The for returning the windows token.

Creates a windows token provider.

The URIs of the Security Token Service (STS). The user credential. The for returning the windows token.

Creates an OAuth (open standard for authorization) token provider.

The URIs of the Security Token Service (STS). The user credential. The for returning OAuth token.

Creates an Azure Active Directory token provider.

AuthenticationContext for AAD. The app credential. The service resource URI for token acquisition. The for returning Json web token.

Creates an Azure Active Directory token provider.

AuthenticationContext for AAD. The client assertion certificate credential. The service resource URI for token acquisition. The for returning Json web token.

Creates an Azure Active Directory token provider.

AuthenticationContext for AAD. ClientId for AAD. The user password credential. The service resource URI for token acquisition. The for returning Json web token.

Creates an Azure Active Directory token provider.

AuthenticationContext for AAD. ClientId for AAD. The redrectUri on Client App. Platform parameters User Identifier The service resource URI for token acquisition. The for returning Json web token.

Creates an Azure Active Directory token provider.

AuthenticationContext for AAD. ClientId for AAD. The redrectUri on Client App. Platform parameters The service resource URI for token acquisition. The for returning Json web token.

Creates Azure Managed Service Identity token provider.

The service resource URI for token acquisition. The for returning Json web token.

Begins an asynchronous operation to get a security token.

The URI which the access token applies to. The request action. true to ignore existing token information in the cache; false to use the token information in the cache. The time span that specifies the timeout value for the message that gets the security token. An delegate that references the method to invoke when the operation is complete. A user-defined object that contains state information about the asynchronous operation. An object that references the asynchronous operation to get a token.

Begins an asynchronous operation to get a web token.

The URI which the token applies to. The request action. true to ignore existing token information in the cache; false to use the token information in the cache. The time span that specifies the timeout value for the message that gets the security token. An delegate that references the method to invoke when the operation is complete. A user-defined object that contains state information about the asynchronous operation. An object that references the asynchronous operation to get a web token.

Completes an asynchronous operation to get a security token.

An object that references the asynchronous operation to get a token. The object.

Asynchronously retrieves the token for the provider.

The URI which the access token applies to. The request action. true to ignore existing token information in the cache; false to use the token information in the cache. The time span that specifies the timeout value for the message that gets the security token. The result of the asynchronous operation.

Asynchronously retrieves the web token for the provider.

The URI which the access token applies to. The request action. true to ignore existing token information in the cache; false to use the token information in the cache. The time span that specifies the timeout value for the message that gets the security token. The result of the asynchronous operation.

Completes an asynchronous operation to get a web token.

An object that references the asynchronous operation to get a web token. The that represents the web token.

Executes upon calling the BeginGetToken method.

The URI which the access token applies to. The request action. The time span that specifies the timeout value for the message that gets the security token. An delegate that references the method to invoke when the operation is complete. A user-defined object that contains state information about the asynchronous operation. An object that references the asynchronous operation to get a token.

Executes upon calling the BeginGetWebToken method.

The URI which the access token applies to. The request action. The time span that specifies the timeout value for the message that gets the security token. An delegate that references the method to invoke when the operation is complete. A user-defined object that contains state information about the asynchronous operation. An object that references the asynchronous operation to get a web token.

Executes upon calling the EndGetToken method.

An object that references the asynchronous operation to get a token. When this method returns, contains the expiration date and time of the token information in the cache. The object.

Executes upon calling the EndGetWebToken method.

An object that references the asynchronous operation to get a web token. When this method returns, contains the expiration date and time of the token information in the cache. The that represents the web token.

Generates a key for the token provider.

The URI which the access token applies to. The request action. A generated key for the token provider.

Returns an object whose value is the same as the token provider.

The URI which the access token applies to. The returned object.

Initializes a new instance of the class.

Specifies the address where the key applies to. Specifies a specific user, application, computer, or other entity

Determines whether the specified object is equal to the current object.

The object to compare with the current object. true if the specified object is equal to the current object; otherwise, false.

Returns the hash code for the key.

The hash code for the key.

Determines whether the specified key is equal to the current object.

The key to compare with the current object. true if the specified object is equal to the current object; otherwise, false.

Represents the properties that control the behavior of the socket connection pool.

Gets or sets the group name of the socket connection pool.

The group name of the socket connection pool.

Gets or sets the maximum time the connection can be idle in the connection pool before being disconnected.

The maximum time the connection can be idle in the connection pool before being disconnected.

Gets or sets the time span after which an active connection is closed.

The duration after which the socket connection is closed.

Gets or sets the maximum number of outbound connections for each endpoint that is cached in the connection pool.

The maximum number of outbound connections for each endpoint that is cached in the connection pool.

Maps WSDL contracts and policy assertions into Azure Service Bus TcpRelayTransport bindings.

Initializes a new instance of the class.

Adds custom policy assertions to the WSDL bindings in WSDL documents that are to be imported.

The collection of WSDL documents that are to be imported. The collection of XML Schema documents that are to be imported. The collection of policy assertions that are to be imported.

Called when importing a contract.

The importer. The import context to be modified.

Called when importing an endpoint.

The importer. The import context to be modified.

Import custom policy assertions and add implementing binding elements

The MetadataImporter object in use. The PolicyConversionContext that contains both the policy assertions that can be imported and the collections of binding elements to which implementing binding elements can be added.

Maps WSDL contracts and policy assertions into Azure Service Bus HttpRelayTransport bindings.

Initializes a new instance of the class.

Maps WSDL contracts and policy assertions into Azure Service Bus OnewayRelayTransport bindings.

Initializes a new instance of the class.

Maps WSDL contracts and policy assertions into Azure Service Bus standard bindings.

Called prior to importing the metadata documents associated with the standard binding.

Describes the service. Describes the . Contains the policy elements.

Imports WSDL contract information for standard bindings.

The WSDL importer for importing and resolving WSDL metadata. Provides the context for the conversion from WSDL to the service description.

Maps endpoints defined in WSDL into the service description.

The WSDL importer for importing and resolving WSDL metadata. The context for the conversion.

Specifies the error codes of the exceptions.

A parse error encountered while processing a request.

A generic unauthorized error.

The service bus has no transport security.

The token is missing.

The signature is invalid.

The audience is invalid.

A malformed token.

The token had expired.

The audience is not found.

The expiry date not found.

The issuer cannot be found.

The signature cannot be found.

The incoming ip has been rejected by policy.

The incoming ip is not in acled subnet.

A generic forbidden error.

Operation is not allowed.

The endpoint is not found.

The destination is invalid.

The namespace is not found.

The store lock is lost.

The SQL filters exceeded its allowable maximum number.

The correlation filters exceeded its allowable maximum number.

The subscriptions exceeded its allowable maximum number.

A conflict during updating occurred.

The Event Hub is at full capacity.

A generic conflict error.

An operation is in progress.

The entity is not found.

An internal error that is not specified.

The error of data communication.

An internal error.

The provider is unreachable.

The server is busy.

Archive Storage Account Server is busy.

Archive Storage Account ResourceId is invalid.

The error is caused by bad gateway.

The gateway did not receive a timely response from the upstream server.

The detail of an unknown exception.

Describes the current status of a one-way connection.

Occurs when the connection is being established.

Occurs when the connection goes offline.

Occurs when the connection comes online.

Gets a value that determines whether the connection is online.

true if the connection is alive and online; false if there is no connectivity towards the Azure Service Bus from the current network location.

Retrieves the last error encountered when trying to reestablish the connection from the offline state.

Returns a that contains the last error.

A strongly-typed resource class, for looking up localized strings, etc.

Returns the cached ResourceManager instance used by this class.

Overrides the current thread's CurrentUICulture property for all resource lookups using this strongly typed resource class.

Looks up a localized string similar to The client cannot enable redirect when AcceptMessageSession is used..

Looks up a localized string similar to Close '{0}'..

Looks up a localized string similar to Open '{0}'..

Looks up a localized string similar to An AsyncCallback threw an exception..

Looks up a localized string similar to The 'End' method has already been called on this AsyncResult object..

Looks up a localized string similar to A base address cannot contain a Uri fragment..

Looks up a localized string similar to A base address cannot contain a Uri query string..

Looks up a localized string similar to A base address cannot contain a Uri user info section..

Looks up a localized string similar to Only an absolute Uri can be used as a base address..

Looks up a localized string similar to BasicHttp binding requires that BasicHttpBinding.Security.Message.ClientCredentialType be equivalent to the BasicHttpMessageCredentialType.Certificate credential type for secure messages. Select Transport or TransportWithMessageCredential security for UserName credentials..

Looks up a localized string similar to Failed to allocate a managed memory buffer of {0} bytes. The amount of available memory may be low..

Looks up a localized string similar to A newly accepted connection did not receive initialization data from the sender within the configured ChannelInitializationTimeout ({0}). As a result the connection will be aborted. If you are on a highly congested network, or your sending machine is heavily loaded, consider increasing this value or load-balancing your server..

Looks up a localized string similar to The specified channel type {0} is not supported by this channel manager..

Looks up a localized string similar to '{0}' contained character '{1}' which is not allowed because it is reserved in the Uri scheme..

Looks up a localized string similar to ClientCredentialType.None is not valid for the TransportWithMessageCredential security mode. Specify a message credential type or use a different security mode..

Looks up a localized string similar to ClientWebSocketConnection is closed..

Looks up a localized string similar to EndRead method cannot be called before the asynchronous read operation is complete..

Looks up a localized string similar to BeginRead method cannot be called when there is an asynchronous read operation already pending..

Looks up a localized string similar to ServiceBusClientWebSocket not in Initial State during Connect..

Looks up a localized string similar to ServiceBusClientWebSocket not in Open State during Receive..

Looks up a localized string similar to ServiceBusClientWebSocket not in Open State during Send..

Looks up a localized string similar to Client WebSocket Transport is closed..

Looks up a localized string similar to Client WebSocket Transport read buffer is too small to read incoming message..

Looks up a localized string similar to Close timed out after {0}. Increase the timeout value passed to the call to Close or increase the CloseTimeout value on the Binding. The time allotted to this operation may have been a portion of a longer timeout..

Looks up a localized string similar to The communication object '{0}' cannot be used for communication because it has been Aborted. {1}.

Looks up a localized string similar to The communication object '{0}' has overridden the virtual function {1} but it does not call version defined in the base class..

Looks up a localized string similar to The communication object '{0}' cannot be modified while it is in the {1} state..

Looks up a localized string similar to The communication object '{0}' is in the {1} state. Communication objects cannot be used for communication unless they are in the Opened state..

Looks up a localized string similar to The communication object '{0}' cannot be used for communication because it is in the Faulted state. {1}.

Looks up a localized string similar to Configuration binding extension '{0}' could not be found. Verify that this binding extension is properly registered in system.serviceModel/extensions/bindingExtensions and that it is spelled correctly..

Looks up a localized string similar to The {1} binding does not have a configured binding named '{0}'..

Looks up a localized string similar to The value '{0}' is not a valid instance of type '{1}'..

Looks up a localized string similar to The instance is not a valid configurable value of type '{0}'..

Looks up a localized string similar to {0} is not a valid encoding string for System.Text.Encoding.GetEncoding(string)..

Looks up a localized string similar to The '{0}' configuration section cannot be created. The machine.config file is missing information. Verify that this configuration section is properly registered and that you have correctly spelled the section name. For Windows Communication Foundation sections, run ServiceModelReg.exe -i to fix this error..

Looks up a localized string similar to Content Type {0} was sent to a service expecting {1}. The client and service bindings may be mismatched..

Looks up a localized string similar to No DNS entries exist for host {0}..

Looks up a localized string similar to Duplex channel to {0} was aborted during the open process..

Looks up a localized string similar to No duplex session listener was listening at {0}. This could be due to an incorrect via set on the client or a binding mismatch..

Looks up a localized string similar to A registration already exists for Uri '{0}'..

Looks up a localized string similar to There was no endpoint listening at {0} that could accept the message. This is often caused by an incorrect address or Soap action. See the InnerException, if present, for more details..

Looks up a localized string similar to Event Processor already registered for partion '{0}'..

Looks up a localized string similar to An attempt was made to decode a value after the framing stream was ended..

Looks up a localized string similar to Content Type {0} was not supported by service {1}. The client and service bindings may be mismatched..

Looks up a localized string similar to The framing content type size ({0}) exceeds the quota..

Looks up a localized string similar to Content type '{0}' is too long to be processed by the remote host. See the server logs for more details..

Looks up a localized string similar to Error while reading message framing format at position {0} of stream (state: {1}).

Looks up a localized string similar to The framing fault size ({0}) exceeds the quota..

Looks up a localized string similar to Server faulted with code '{0}'..

Looks up a localized string similar to The maximum message size quota for incoming messages has been exceeded for the remote channel. See the server logs for more details..

Looks up a localized string similar to Framing mode {0} is not supported..

Looks up a localized string similar to The .Net Framing mode being used is not supported by '{0}'. See the server logs for more details..

Looks up a localized string similar to More data was expected, but EOF was reached..

Looks up a localized string similar to Expected record type '{0}', but found '{1}'..

Looks up a localized string similar to Specified size is too large for this implementation..

Looks up a localized string similar to The requested upgrade is not supported by '{0}'. This could be due to mismatched bindings (for example security enabled on the client and not on the server)..

Looks up a localized string similar to The value cannot be accessed because it has not yet been fully decoded..

Looks up a localized string similar to Framing major version {0} is not supported..

Looks up a localized string similar to The .Net Framing version being used is not supported by '{0}'. See the server logs for more details..

Looks up a localized string similar to The framing via ({0}) is not a valid URI..

Looks up a localized string similar to The framing via size ({0}) exceeds the quota..

Looks up a localized string similar to Via '{0}' is too long to be processed by the remote host. See the server logs for more details..

Looks up a localized string similar to A user callback threw an exception. Check the exception stack and inner exception to determine the callback that failed..

Looks up a localized string similar to The BaseUriWithWildcard object has invalid fields after deserialization..

Looks up a localized string similar to The protocol binding '{0}' does not conform to the syntax for '{1}'. The following is an example of valid '{1}' protocol bindings: '{2}'..

Looks up a localized string similar to The protocol binding '{0}' is not valid for '{1}'. This might be because the port number is out of range..

Looks up a localized string similar to The '{0}' protocol binding '{1}' specifies an invalid port number '{2}'..

Looks up a localized string similar to There is no compatible TransportManager found for Uri '{0}'. This may be because that you have used an absolute address which points outside of the virtual application. Please use a relative address instead..

Looks up a localized string similar to There is no compatible TransportManager found for Uri '{0}'. This may be because that you have used an absolute address which points outside of the virtual application, or the binding settings of the endpoint do not match those that have been set by other services or endpoints. Note that all bindings for the same protocol should have same settings in the same application..

Looks up a localized string similar to The protocol '{0}' is not supported..

Looks up a localized string similar to The requested service '{0}' could not be activated. See the server's diagnostic trace logs for more information..

Looks up a localized string similar to The '{0}' authentication scheme has been specified for the proxy on the HTTP factory. However, the factory only supports specification of exactly one authentication scheme. Valid authentication schemes are Digest, Negotiate, NTLM, Basic, or Anonymous..

Looks up a localized string similar to The inner listener factory of {0} must be set before this operation..

Looks up a localized string similar to Insufficient memory available to complete the operation..

Looks up a localized string similar to The AsyncResult object used to end this operation was not the object that was returned when the operation was initiated..

Looks up a localized string similar to Invalid decoder found within state machine..

Looks up a localized string similar to Compression failed. Could not read Gzip Header. Returning the original body stream..

Looks up a localized string similar to Compression failed. The compressed stream has unexpected values in the flag field. Returning the original body stream..

Looks up a localized string similar to Object synchronization method was called from an unsynchronized block of code..

Looks up a localized string similar to NotificationHub creation with preview API version, or lesser version is not supported..

Looks up a localized string similar to The path '{0}' contains character(s) that are not allowed by Service Bus. Entity segments can contain only letters, numbers, periods (.), hyphens (-), and underscores (_)..

Looks up a localized string similar to The provided Uri scheme '{0}' is invalid; expected '{1}'..

Looks up a localized string similar to The specified channel listener at '{0}' is not registered with this transport manager..

Looks up a localized string similar to For TransferMode.Buffered, MaxReceivedMessageSize and MaxBufferSize must be the same value..

Looks up a localized string similar to MaxBufferSize must not exceed MaxReceivedMessageSize..

Looks up a localized string similar to The maximum message size quota for incoming messages ({0}) has been exceeded. To increase the quota, use the MaxReceivedMessageSize property on the appropriate binding element..

Looks up a localized string similar to This factory buffers messages, so the message sizes must be in the range of an integer value..

Looks up a localized string similar to The maximum message size quota for outgoing messages ({0}) has been exceeded..

Looks up a localized string similar to There is a problem with the Xml that was received from the network. See inner exception for more details..

Looks up a localized string similar to Request Message is missing a MessageID header. This header is required to correlate a reply..

Looks up a localized string similar to More than one MessageEncodingBindingElement was found in the BindingParameters of the BindingContext. This usually is caused by having multiple MessageEncodingBindingElements in a CustomBinding. Remove all but one of these elements..

Looks up a localized string similar to More than one IStreamUpgradeProviderElement was found in the BindingParameters of the BindingContext. This usually is caused by having multiple IStreamUpgradeProviderElements in a CustomBinding. Remove all but one of these elements..

Looks up a localized string similar to The namespace is temporarily locked during migration..

Looks up a localized string similar to Could not find a compatible transport manager for Uri '{0}'..

Looks up a localized string similar to No IPEndpoints were found for host {0}..

Looks up a localized string similar to The specified offset exceeds the buffer size ({0} bytes)..

Looks up a localized string similar to Open timed out after {0} while establishing a transport session to {1}. The time allotted to this operation may have been a portion of a longer timeout..

Looks up a localized string similar to Operation was aborted while establishing a connection to {0}..

Looks up a localized string similar to Management operation is not allowed for entities in namespace: '{0}' - as it is not active..

Looks up a localized string similar to This operation is not allowed for given namespace type: {0}..

Looks up a localized string similar to You have tried to create a channel to a service that does not support .Net Framing. .

Looks up a localized string similar to You have tried to create a channel to a service that does not support .Net Framing. It is possible that you are encountering an HTTP endpoint..

Looks up a localized string similar to More data was expected, but EOF was reached..

Looks up a localized string similar to Receive request on local address {0} timed out after {1}. The time allotted to this operation may have been a portion of a longer timeout..

Looks up a localized string similar to Receive request timed out after {0}. The time allotted to this operation may have been a portion of a longer timeout..

Looks up a localized string similar to Receive on local address {0} timed out after {1}. The time allotted to this operation may have been a portion of a longer timeout..

Looks up a localized string similar to Receive timed out after {0}. The time allotted to this operation may have been a portion of a longer timeout..

Looks up a localized string similar to Receive timed out after {0}. The time allotted to this operation may have been a portion of a longer timeout..

Looks up a localized string similar to Stream Security is required at {0}, but no security context was negotiated. This is likely caused by the remote endpoint missing a StreamSecurityBindingElement from its binding..

Looks up a localized string similar to A reply has already been sent from this RequestContext..

Looks up a localized string similar to The request channel timed out attempting to send after {0}. Increase the timeout value passed to the call to Request or increase the SendTimeout value on the Binding. The time allotted to this operation may have been a portion of a longer timeout..

Looks up a localized string similar to The request channel timed out while waiting for a reply after {0}. Increase the timeout value passed to the call to Request or increase the SendTimeout value on the Binding. The time allotted to this operation may have been a portion of a longer timeout..

Looks up a localized string similar to The requestContext has been aborted..

Looks up a localized string similar to Request timed out after {0} while establishing a transport connection to {1}. The time allotted to this operation may have been a portion of a longer timeout..

Looks up a localized string similar to Azure Hybrid Connections to the endpoint '{0}' are not allowed by Group Policy..

Looks up a localized string similar to Azure Hybrid Connections are disabled by Group Policy..

Looks up a localized string similar to The server only supports Redirect. Client must set EnableRedirect=true in the transport settings..

Looks up a localized string similar to Cannot establish a reliable session without secure conversation. Enable secure conversation..

Looks up a localized string similar to SecurityAuditBehavior is not supported on the channel factory..

Looks up a localized string similar to This stream does not support seek related operation..

Looks up a localized string similar to You cannot send messages on a channel after CloseOutputSession has been called..

Looks up a localized string similar to Sending to via {0} timed out after {1}. The time allotted to this operation may have been a portion of a longer timeout..

Looks up a localized string similar to This request has been blocked because the entity or namespace is being throttled. Please retry the operation, and if condition continues, please slow down your rate of request..

Looks up a localized string similar to The server at {0} rejected the session-establishment request. Please retry..

Looks up a localized string similar to The server rejected the upgrade request..

Looks up a localized string similar to Server '{0}' is too busy to process this request. Try again later..

Looks up a localized string similar to The ServiceHost close operation timed out after {0}. This could be because a client failed to close a sessionful channel within the required time. The time allotted to this operation may have been a portion of a longer timeout..

Looks up a localized string similar to Timeout must be greater than or equal to TimeSpan.Zero. To disable timeout, specify TimeSpan.MaxValue..

Looks up a localized string similar to Timeouts larger than Int32.MaxValue TotalMilliseconds (approximately 24 days) cannot be honored. To disable timeout, specify TimeSpan.MaxValue..

Looks up a localized string similar to An argument of the wrong type was passed to this method. This method expected an argument of type {0}, but it was passed an argument of type {1}..

Looks up a localized string similar to The message could not be dispatched to the service at address '{0}'. Refer to the server event log for more details..

Looks up a localized string similar to The message could not be dispatched because the service at the endpoint address '{0}' is unavailable for the protocol of the address..

Looks up a localized string similar to The specified size exceeds the remaining buffer space ({0} bytes)..

Looks up a localized string similar to The socket was aborted because an asynchronous receive from the socket did not complete within the allotted timeout of {0}. The time allotted to this operation may have been a portion of a longer timeout..

Looks up a localized string similar to The socket connection was aborted because an asynchronous send to the socket did not complete within the allotted timeout of {0}. The time allotted to this operation may have been a portion of a longer timeout..

Looks up a localized string similar to A graceful close was attempted on the socket, but the other side ({0}) is still sending data..

Looks up a localized string similar to The remote endpoint of the socket ({0}) did not respond to a close request within the allotted timeout ({1}). It is likely that the remote endpoint is not calling Close after receiving the EOF signal (null) from Receive. The time allotted to this operation may have been a portion of a longer timeout..

Looks up a localized string similar to The socket connection has been disposed..

Looks up a localized string similar to The space needed for encoding ({0} bytes) exceeds the message frame offset..

Looks up a localized string similar to The SSL certificate thumbprint value is null..

Looks up a localized string similar to TimeoutStream requires an inner Stream that supports timeouts; its CanTimeout property must be true..

Looks up a localized string similar to An error occurred while transmitting data..

Looks up a localized string similar to A reply message was received without a valid RelatesTo header. This may have been caused by a missing RelatesTo header or a RelatesTo header with an invalid WS-Addressing Relationship type..

Looks up a localized string similar to Could not connect to {0}. TCP error code {1}: {2}. .

Looks up a localized string similar to Could not connect to {0}. The connection attempt lasted for a time span of {3}. TCP error code {1}: {2}. .

Looks up a localized string similar to Connecting to via {0} timed out after {1}. Connection attempts were made to {2} of {3} available addresses ({4}). Check the RemoteAddress of your channel and verify that the DNS records for this endpoint correspond to valid IP Addresses. The time allotted to this operation may have been a portion of a longer timeout..

Looks up a localized string similar to The socket connection was aborted. This could be caused by an error processing your message or a receive timeout being exceeded by the remote host, or an underlying network resource issue. Local socket timeout was '{0}'..

Looks up a localized string similar to The socket transfer timed out after {0}. You have exceeded the timeout set on your binding. The time allotted to this operation may have been a portion of a longer timeout..

Looks up a localized string similar to Insufficient winsock resources available to complete socket connection initiation..

Looks up a localized string similar to The socket connection was aborted by your local machine. This could be caused by a channel Abort() call, or a transmission error from another thread using this socket..

Looks up a localized string similar to A TCP error ({0}: {1}) occurred while transmitting data..

Looks up a localized string similar to Cannot claim lock within the allotted timeout of {0}. The time allotted to this operation may have been a portion of a longer timeout..

Looks up a localized string similar to The ThreadNeutralSemaphore has been aborted..

Looks up a localized string similar to The ThreadNeutralSemaphore.Abort is not supported for the asynchronous usage..

Looks up a localized string similar to The open operation did not complete within the allotted timeout of {0}. The time allotted to this operation may have been a portion of a longer timeout. For more information on exception types and proper exception handling, please refer to http://go.microsoft.com/fwlink/?LinkId=761101.

Looks up a localized string similar to The request operation did not complete within the allotted timeout of {0}. The time allotted to this operation may have been a portion of a longer timeout. For more information on exception types and proper exception handling, please refer to http://go.microsoft.com/fwlink/?LinkId=761101.

Looks up a localized string similar to TimeSpan must be greater than TimeSpan.Zero..

Looks up a localized string similar to The token service did not return an audience..

Looks up a localized string similar to The token service did not return a token expiration..

Looks up a localized string similar to The token service did not return a token..

Looks up a localized string similar to The token provider was unable to provide a security token while accessing '{0}'. Token provider returned message: '{1}'..

Looks up a localized string similar to The token service returned an invalid parameter '{0}'..

Looks up a localized string similar to The token provider service was not available when obtaining a token for '{0}'..

Looks up a localized string similar to The timeout elapsed upon attempting to obtain a token while accessing '{0}'..

Looks up a localized string similar to AppDomain Unloading..

Looks up a localized string similar to A connection has exceeded the idle timeout of this connection pool ({0}) and been closed..

Looks up a localized string similar to A connection has exceeded the connection lease timeout of this connection pool ({0}) and been closed..

Looks up a localized string similar to MaxOutboundConnectionsPerEndpoint quota ({0}) has been reached, so connection was closed and not stored in this connection pool..

Looks up a localized string similar to Wrote to the event log..

Looks up a localized string similar to An attempt to reuse a pooled connection failed. Another attempt will be made with {0} remaining in the overall timeout..

Looks up a localized string similar to MaxOutboundConnectionsPerEndpoint quota ({0}) has been reached, so the connection was closed and not reused by the listener..

Looks up a localized string similar to A trace size quota was exceeded. The trace was truncated..

Looks up a localized string similar to Listening at '{0}'..

Looks up a localized string similar to Transactions are not supported for the operation '{0}'..

Looks up a localized string similar to This property cannot be changed after the transport manager has been opened..

Looks up a localized string similar to Cannot resolve the host name of URI "{0}" using DNS..

Looks up a localized string similar to An exception went unhandled..

Looks up a localized string similar to Protocol Type {0} was sent to a service that does not support that type of upgrade..

Looks up a localized string similar to .Net Framing upgrade request for {0} was sent to a service that is not setup to receive upgrades..

Looks up a localized string similar to The scheme parameter must not be empty..

Looks up a localized string similar to Uri {0} could not be set because its size ({1}) exceeds the max supported size ({2})..

Looks up a localized string similar to The value of this argument must fall within the range {0} to {1}..

Looks up a localized string similar to The value of this argument must be non-negative..

Looks up a localized string similar to The value of this argument must be positive..

Looks up a localized string similar to WaitForMessage timed out after {0}. The time allotted to this operation may have been a portion of a longer timeout..

Looks up a localized string similar to The contents of the buffer passed to PlainXmlWriter.WriteChars are invalid..

Creates and manages the contents of connection strings. You can use this class to construct a connection string for creating client messaging entities. It can also be used to perform basic validation on an existing connection string.

// The following sample code takes an existing // connection string, change the transport type to use Amqp, // and return the new connection string in string form var bulider = new ServiceBusConnectionStringBuilder(connectionString); bulider.TransportType = TransportType.Amqp; Console.WriteLine(bulider.ToString());

Initializes a new instance of the class.

Initializes a new instance of the class with a specified existing connection string.

The connection string, which you can obtain from the Azure Management Portal. Throws if The connection string is missing endpoints.The connection string does not have enough information to form a token provider. For example, this can happen if you supplied a SasIssuer name but not a SasIssuer key.The value is not in a valid format.The or values are not in an integer format.

Gets a collection of service endpoints. Each endpoint must reference the same Service Bus namespace.

A set of endpoints.

Gets a set of STS endpoints.

A set of STS endpoints.

Gets or sets the that specifies how long the messaging operation has to complete before timing out.

The that specifies how long the messaging operation has to complete before timing out. The default value is one minute.

Gets or sets the TCP port number for runtime operation.

The runtime port. This is only used in server scenario. When generating connection string for Azure service, this should be left at its default value.

Gets or sets the TCP port number for management operations.

The management port. This is only used in server scenario. When generating connection string for Azure service, this should be left at its default value.

Gets or sets the entity path for the , , and properties.

Returns .

Get or sets the publisher identifier.

Returns .

Gets or sets the shared secret issuer name.

The shared secret issuer name.

Gets or sets the shared secret issuer secret.

The shared secret issuer secret.

Gets or sets the name of the shared access key.

The name of the shared access key.

Gets or sets the shared access key for the connection authentication.

The shared access key for the connection authentication.

Gets or sets the SAS access token.

Returns .

Gets or sets the Windows credential domain.

The Windows credential domain.

Gets or sets the Windows credential user name.

The Windows credential user name.

Gets or sets the Windows credential password.

The Windows credential password.

Gets or sets the authentication user name for the connection.

The authentication user name for the connection.

Gets or sets the authentication domain for the connection.

The authentication domain for the connection.

Gets or sets the authentication password for the connection.

The authentication password for the connection.

Gets or sets the transport type to be used for client messaging entities.

The transport type associated with the connection. If not set, default is for , otherwise default is

gets or sets the bool which indicate if this connection string belongs to a DeveiceHub scenario or not.

Retrieves the absolute management endpoints.

The absolute management endpoints

Retrieves the absolute runtime endpoints.

The absolute runtime endpoints.

Returns a string that represents the current object.

A string that represents the current object. // The following sample code takes an existing // connection string, change the transport type to use Amqp, // and return the new connection string in string form var bulider = new ServiceBusConnectionStringBuilder(connectionString); bulider.TransportType = TransportType.Amqp; Console.WriteLine(bulider.ToString());

Create a connection string using the shared access key.

The endpoint. The name of the shared access key. The shared access key. The created connection using the shared access key.

Create a connection string using the shared access key.

The set of endpoints. The runtime port. The management port. The name of the shared access key. The shared access key The created connection using the shared access key.

Creates a connection string using SAS credentials.

The endpoint. The path to the messaging entity. The publisher ID. The SAS key. Returns .

Creates a connection string using the shared secret credentials.

The endpoint. The issuer The issuer secret. The created connection using the shared secret credentials.

Creates a connection string using the shared secret credentials.

The endpoints. The set of security token service endpoints. The runtime port. The management port. The issuer. The issuer secret. The created connection using the shared secret credentials.

Creates a connection string using Windows credentials.

The set of endpoints The set of security token service endpoints. The runtime port. The management port. The domain where the connection will be established. The user. The windows password. The created connection string.

Creates a connection string using authentication credentials.

The set of endpoints. The set of security token service endpoints. The runtime port. The management port. The domain where the connection will be established. The authentication user. The authentication password. The created service bus connection string.

Describes the Service Bus environment.

Gets the default host name for the Access Control Service.

Returns the default identity host name.

Gets the singleton instance that holds the connectivity settings for TCP and HTTP-based endpoints.

Returns a that contains the connectivity settings.

Creates a URI string to use with access control for the specified service namespace.

The service namespace to create the URI for. Returns a that contains the specified URI.

Constructs the Service Bus URI for an application, using the specified scheme, service namespace, and service path.

The scheme of the URI. The service namespace used by the application. The service path that follows the host name section of the URI. Returns a that contains the new URI.

Constructs the Service Bus URI for an application, using the specified scheme, service namespace, service path, and relayed path prefix.

The scheme of the URI. The service namespace used by the application. The service path that follows the host name section of the URI. True if the relay path prefix is suppressed; otherwise, false. Returns a that contains the new URI.

Represents the data associated with the service bus error.

The tag root.

The tag for the HTTP status code.

The tag for the error detail.

Gets or sets the error code.

The error code.

Gets or sets the error details.

The error details.

Initializes a new instance of the class.

Gets the value of the service bus error data.

The HTTP web response. The value of the service bus error data.

Gets or sets the extension data objects for the error.

The extension data objects for the error.

Remove a queryString parameter and while leaving the rest of the queryString properly formatted including only those ampersands which are required after the query string parameter identified by removeStartIndex+removeLength is removed. Example1: queryString = "a=b&c=d&e=f", removeStartIndex = 4, removeLength = 3 results in "a=b&e=f" Example2: queryString = "a=b&c=d", removeStartIndex = 0, removeLength = 3 results in "c=d" Example3: queryString = "a=b&c=d", removeStartIndex = 4, removeLength = 3 results in "a=b"

TODO: See if we can remove this API. This was moved from Microsoft.ServiceBus.Channels.dll so that Microsoft.Cloud.ServiceBus.Common.dll can use it. Validate the service namespace and the hostname in the input Uri and return the service namespace on successful validation

Uri to validate expected hostname to compare against (e.g. ".servicebus.windows.net") true if reserved hostname suffixes are allowed in the Uri, false otherwise the validated service namespace

TODO: See if we can remove this API. This was moved from Microsoft.ServiceBus.Channels.dll so that Microsoft.Cloud.ServiceBus.Common.dll can use it.

Validate if a given servcie namespace candidate is a valid service namespace

servcie namespace candidate to be validated true if reserved hostname suffixes are allowed in the Uri, false otherwise true if the given candidate is a valid service namespace, false otherwise

This is a stub for auto-generated resource class, providing GetString function. Usage: string s = SR.GetString(SR.MyIdenfitier);

A Helper method to convert a System.Net.EndPoint to a string like "host:8080". This is necessary because DnsEndPoint.ToString() returns something like "Unspecified/hostname:80" (where "Unspecified" is the AddressFamily).

This is a base class for IteratorAsyncResults that need a TrackingContext.

Specifies an enumeration of controller commands.

The Update command.

The SendManifest command.

The Enable command.

The Disable command.

Only here because System.Diagnostics.EventProvider needs one more extensibility hook (when it gets a controller callback)

Constructs a new EventProviderClone. This causes the class to be registered with the OS an if a ETW controller turns on the logging then logging will start.

The GUID that identifies this provider to the system.

This method registers the controlGuid of this class with ETW. We need to be running on Vista or above. If not an PlatformNotSupported exception will be thrown. If for some reason the ETW Register call failed a NotSupported exception will be thrown.

This method deregisters the controlGuid of this class with ETW.

This method un-registers from ETW.

Gets any data to be passed from the controller to the provider. It starts with what is passed into the callback, but unfortunately this data is only present for when the provider is active at the the time the controller issues the command. To allow for providers to activate after the controller issued a command, we also check the registry and use that to get the data. The function returns an array of bytes representing the data, the index into that byte array where the data starts, and the command being issued associated with that data.

IsEnabled, method used to test if provider is enabled

IsEnabled, method used to test if event is enabled

Level to test Keyword to test

WriteMessageEvent, method to write a string with level and Keyword

Level to test Keyword to test

WriteMessageEvent, method to write a string with level=0 and Keyword=0

Message to log

WriteEvent, method to write a parameters with event schema properties

Event Descriptor for this event.

WriteEvent, method to write a string with event schema properties

Event Descriptor for this event. string to log.

WriteEvent, method to be used by generated code on a derived class

Event Descriptor for this event. number of event descriptors pointer do the event data

The human-friendly name of the curEventSource. It defaults to the simple name of the class

Every curEventSource is assigned a GUID to uniquely identify it to the system.

Returns true if the curEventSource has been enabled at all.

Returns true if events with >= 'level' and have one of 'keywords' set are enabled. Note that the result of this function only an approximiation on whether a particular event is active or not. It is only meant to be use as way of avoiding expensive computation for logging when logging is not on. EventSources are free to have additional filtering.

Returns a string of the XML manifest associated with the curEventSource. The scheme for this XML is documented at in EventManifest Schema http://msdn.microsoft.com/en-us/library/aa384043(VS.85).aspx

event source type The manifest XML fragment contains the string name of the DLL name in which it is embeded. This parameter spcifies what name will be used the filename to extract the resource The XML data string

Send a command to a particular EventSource identified by 'eventSourceGuid' If eventSourceGuid is Guid.Empty, then the command is sent to all eventSources that currently exist in the appdomain. Calling this routine simply forwards the command to the EventSource.OnEventCommand callback. What the EventSource does with the command and its arguments are from that point EventSource-specific. The curEventSource is passed the EventListener that issued the command allong with the command and arguments. The contract is that to the extent possible the curEventSource should not affect other EventListeners (eg filtering events), however sometimes this simply is not possible (if the command was to provoke a GC, or a System flush etc).

Return a snapshot of all the EventSources in the appdomain

This method is called when the curEventSource is updated by the controller.

Disposes of an EventSource.

Called from Dispose() with disposing=true, and from the finalizer (~MeasurementBlock) with disposing=false. Guidelines: 1. We may be called more than once: do nothing after the first call. 2. Avoid throwing exceptions if disposing is false, i.e. if we're being finalized. True if called from Dispose(), false if called from the finalizer.

Returns true if 'eventNum' is enabled if you only consider the level and matchAnyKeyword filters. It is possible that eventSources turn off the event based on additional filtering criteria.

This class lets us hook the 'OnEventCommand' from the curEventSource.

Used to hold all the static information about an event. This includes everything in the event descriptor as well as some stuff we added specifically for EventSource. see the code:m_eventData for where we use this.

Use this method when StackTrace or large strings must be logged. Use WriteEvent otherwise. The stacktrace or exception or large string must be the last parameter passed to the method. Some of the exception traces are observed to be large and cannot be opened with Linqpad. So we want to limit the number of characters printed out a time. The idea below to have a common logging function that can be used for all events that print stack trace as part of the event log. NOTE: This function assumes that stack Trace should be the last argument passed to this function because we split large traces into multiple parts with the assumption that last argument is the stack trace.

eventId traceActivityId The last item in list will be concatenated if too long.

Use this method when StackTrace or large strings must be logged. Use WriteEvent otherwise. The stacktrace or exception or large string must be the last parameter passed to the method. Some of the exception traces are observed to be large and cannot be opened with Linqpad. So we want to limit the number of characters printed out a time. The idea below to have a common logging function that can be used for all events that print stack trace as part of the event log. NOTE: This function assumes that stack Trace should be the last argument passed to this function because we split large traces into multiple parts with the assumption that last argument is the stack trace.

eventId The last item in list will be concatenated if too long.

If 'value is 'true' then set the curEventSource so that 'dispatcher' will recieve event with the eventId of 'eventId. If value is 'false' disable the event for that dispatcher. If 'eventId' is out of range return false, otherwise true.

Returns true if any event at all is on.

This method looks at the IL and tries to pattern match against the standard 'boilerplate' event body { if (Enabled()) WriteEvent(#, ...) } If the pattern matches, it returns the literal number passed as the first parameter to the WriteEvent. This is used to find common user errors (mismatching this number with the EventAttribute ID). It is only used for validation.

The method to probe. The literal value or -1 if the value could not be determined.

An code:EventListener represents the target for all events generated by EventSources (that is subclasses of code:EventSource), in the currnet appdomain. When a new EventListener is created it is logically attached to all eventSources in that appdomain. When the EventListener is Disposed, then it is disconnected from the event eventSources. Note that there is a internal list of STRONG references to EventListeners, which means that relying on the lack of references ot EventListeners to clean up EventListeners will NOT work. You must call EventListener.Dispose explicitly when a dispatcher is no longer needed. Once created, EventListeners can enable or disable on a per-curEventSource basis using verbosity levels (code:EventLevel) and bitfields code:EventKeywords to further restrict the set of events to be sent to the dispatcher. The dispatcher can also send arbitrary commands to a particular curEventSource using the 'SendCommand' method. The meaning of the commands are curEventSource specific. The Null Guid (that is (new Guid()) has special meaning as a wildcard for 'all current eventSources in the appdomain'. Thus it is relatively easy to turn on all events in the appdomain if desired. It is possible for there to be many EventListener's defined in a single appdomain. Each dispatcher is logically independent of the other listeners. Thus when one dispatcher enables or disables events, it affects only that dispatcher (other listeners get the events they asked for). It is possible that commands sent with 'SendCommand' would do a semantic operation that would affect the other listeners (like doing a GC, or flushing data ...), but this is the exception rather than the rule. Thus the model is that each EventSource keeps a list of EventListeners that it is sending events to. Associated with each EventSource-dispatcher pair is a set of filtering criteria that determine for that curEventSource what events that dispatcher will recieve. Listeners receive the events on their 'OnEventWritten' method. Thus subclasses of EventListener must override this method to do something useful with the data. In addition, when new eventSources are created, the 'OnEventSourceCreate' method is called. The invariant associated with this callback is that every curEventSource gets exactly one 'OnEventSourceCreate' call for ever curEventSource that can potentially send it log messages. In particular when a EventListener is created, typically a series of OnEventSourceCreate' calls are made to notify the new dispatcher of all the eventSources that existed before the EventListener was created.

Create a new EventListener in which all events start off truned off (use EnableEvents to turn them on).

Dispose should be called when the EventListener no longer desires 'OnEvent*' callbacks. Because there is an internal list of strong references to all EventListeners, calling 'Displose' directly is the only way to actually make the listen die. Thus it is important that users of EventListener call Dispose when they are done with their logging.

Enable all events from the curEventSource identified by 'eventSource' to the current dispatcher that have a verbosity level of 'level' or lower. This call can have the effect of REDUCING the number of events sent to the dispatcher if 'level' indicates a less verbose level than was previously enabled. This call never has an effect on other EventListeners. Returns 'true' if any curEventSource could be found that matches 'eventSourceGuid'

Enable all events from the curEventSource identified by 'eventSourceGuid' to the current dispatcher that have a verbosity level of 'level' or lower and have a event keyword matching any of the bits in 'machAnyKeyword'. This call can have the effect of REDUCING the number of events sent to the dispatcher if 'level' indicates a less verbose level than was previously enabled or if 'machAnyKeyword' has fewer keywords set than where previously set. If eventSourceGuid is Guid.Empty, then the affects all eventSources in the appdomain If eventSourceGuid is not Guid.Empty, this call has no effect on any other eventSources in the appdomain. This call never has an effect on other EventListeners. Returns 'true' if any curEventSource could be found that matches 'eventSourceGuid'

Enable all events from the curEventSource identified by 'eventSource' to the current dispatcher that have a verbosity level of 'level' or lower and have a event keyword matching any of the bits in 'machAnyKeyword' as well as any (curEventSource specific) effect passing addingional 'key-value' arguments 'arguments' might have. This call can have the effect of REDUCING the number of events sent to the dispatcher if 'level' indicates a less verbose level than was previously enabled or if 'machAnyKeyword' has fewer keywords set than where previously set. This call never has an effect on other EventListeners.

Disables all events coming from curEventSource identified by 'eventSource'. If eventSourceGuid is Guid.Empty, then the affects all eventSources in the appdomain This call never has an effect on other EventListeners.

This method is caleld whenever a new curEventSource is 'attached' to the dispatcher. This can happen for all existing EventSources when the EventListener is created as well as for any EventSources that come into existance after the EventListener has been created. These 'catch up' events are called during the construction of the EventListener. Subclasses need to be prepared for that. In a multi-threaded environment, it is possible that 'OnEventWritten' callbacks for a paritcular curEventSource to occur BEFORE the OnEventSourceCreated is issued.

This method is called whenever an event has been written by a EventSource for which the EventListener has enabled events.

EventSourceIndex is small non-negative integer (suitable for indexing in an array) identifying EventSource. It is unique per-appdomain. Some EventListeners might find it useful to store addditional information about each curEventSource connected to it, and EventSourceIndex allows this extra infomation to be efficiently stored in a (growable) array (eg List(T)).

This routine adds newEventSource to the global list of eventSources, it also assigns the ID to the curEventSource (which is simply the oridinal in the global list). EventSources currently do not pro-actively remove themselves from this list. Instead when eventSources's are GCed, the weak handle in this list naturally gets nulled, and we will reuse the slot. Today this list never shrinks (but we do reuse entries that are in the list). This seems OK since the expectation is that EventSources tend to live for the lifetime of the appdomain anyway (they tend to be used in global variables).

Helper used in code:Dispose that removes any references to 'listenerToRemove' in any of the eventSources in the appdomain. The EventListenersLock must be held before calling this routine.

Checks internal consistancy of EventSources/Listeners.

Gets a global lock that is intended to protect the code:s_Listeners linked list and the code:s_EventSources WeakReference list. (We happen to use the s_EventSources list as the lock object)

Passed to the code:EventSource.OnEventCommand callback

code:EventWrittenEventArgs is passed when the callback given in code:EventListener.OnEventWritten is fired.

EventSources support localization of events. The names used for events, opcodes, tasks, keyworks and maps can be localized to several languages if desired. This works by creating a ResX style string table (by simply adding a 'Resource File' to your project). This resource file is given a name e.g. 'DefaultNameSpace.ResourceFileName' which can be passed to the ResourceManager constructor to read the resoruces. This name is the value of the LocalizationResources property. LocalizationResources property is non-null, then EventSource will look up the localized strings for events by using the following resource naming scheme event_EVENTNAME task_TASKNAME keyword_KEYWORDNAME map_MAPNAME where the capitpalized name is the name of the event, task, keywork, or map value that should be localized. Note that the localized string for an event cooresponds to the Messsage string, and can have {0} values which represent the payload values.

None instance methods in a class that subclasses code:EventSource that and return void are assumed by default to be methods that generate an event. Enough information can be deduced from the name of the method and its signature to generate basic schema information for the event. The code:EventAttribute allows you to specify additional event schema information for an event if desired.

This is also used for TraceSource compatabilty. If code:EventSource.TraceSourceSupport is on events will also be logged a tracesource with the same name as the curEventSource. If this property is set then the payload will go to code:TraceSource.TraceEvent, and this string will be used as the message. If this property is not set not set it goes to code:TraceSource.TraceData. You can use standard .NET substitution operators (eg {1}) in the string and they will be replaced with the 'ToString()' of the cooresponding part of the event payload.

By default all instance methods in a class that subclasses code:EventSource that and return void are assumed to be methods that generate an event. This default can be overriden by specifying the code:NonEventAttribute

Legal values are in ChannelTypes

The publishing buffersize in KB

Specifies an enumeration of event commands.

The Update command.

The SendManifest command.

The Enable command.

The Disable command.

code:EventDispatchers are a simple 'helper' structure that holds the filtering state (m_EventEnabled) for a particular EventSource X EventListener tuple

ManifestBuilder is designed to isolate the details of the message of the event from the rest of EventSource. This one happens to create XML.

Build a manifest for 'providerName' with the given GUID, which will be packaged into 'dllName'. 'resources, is a resource manager. If specified all messsages are localized using that manager.

Add a channel. ChannelAttribute can be null

Used to send the m_rawManifest into the event dispatcher as a series of events.

This class holds the ActivityId that would be set on the thread for ETW during the trace.

WindowsEventTask

Undefined task

EventOpcode

An informational event

An activity start event

An activity end event

A trace collection start event

A trace collection end event

An extensional event

A reply event

An event representing the activity resuming from the suspension

An event representing the activity is suspended, pending another activity's completion

An event representing the activity is transferred to another component, and can continue to work

An event representing receiving an activity transfer from another component

Enumerates the events associated with Azure Service Bus.

The default event.

The application event.

The security event.

The setup event.

The system event.

The reserved event.

EventOpcode

Wild card value

WDI context events

WDI diagnostic events

SQM events

FAiled security audits

Successful security audits

Transfer events where the related Activity ID is a computed value and not a GUID

Events raised using classic eventlog API

Turns on everything.

** Sample event Defintion ** Note: The EventWrite prefix is only for backwards compatibility and new events should not use this prefix. [Event(30000, Level = EventLevel.Verbose , Keywords = Keywords.Client, Channel = Channels.DebugChannel)] public void MessageAbandon(EventTraceActivity activity, string TrackingId, string SubsystemId, string TransportType, string LockTokens) { if (IsEnabled(EventLevel.Verbose, Keywords.Client, Channels.DebugChannel)) { WriteEvent(30000, activity, TrackingId, SubsystemId, TransportType, LockTokens); } }

The TrackingIdHeader contains an identifier that uniquely identifies each request during its lifetime in the ServiceBus.

Create a new header with a new Guid.

Create a new header with the supplied Guid.

a Guid value

Read the TrackingIdHeader from MessageHeaders.

the MessageHeaders to read from the TrackingIdHeader if the TrackingId header is not present

Remove the TrackingIdHeader from MessageHeaders.

the MessageHeaders to remove from

Try to read the TrackingIdHeader from MessageHeaders.

the MessageHeaders the TrackingIdHeader (out) true, if read successfully; false, otherwise

Try to add or update the TrackingIdHeader from MessageHeaders.

the MessageHeaders the TrackingIdHeader true, if successful; false, otherwise

Stores a TrackingContext in WCF Message Properties

Create a new TrackingIdMessageProperty with the provided Guid.

The TrackingContext.

Add or update the TrackingIdMessageProperty.

the MessageProperties collection to add the TrackingContext instance to add

Try to read the TrackingIdMessageProperty from Message properties.

the Message properties the TrackingIdMessageProperty (out) true, if read successfully; false, otherwise

TrackingContext class is used to communicate tracking information for each request.

Specifies the attribute name for the tracking identifier in the returned token response.

Specifies the name of system tracker.

Specifies the header namespace.

Get the ambient TrackingContext if one is set. In order to set TrackingContext.Current create a TrackingContext.Scope() in a using or try/finally block (always Dispose when finished).

Returns the tracking id used in this context

Returns the system tracker used in this context

Caller-specified request ID, in the form of a GUID with no decoration such as curly braces provided via CSM. If the caller provides this header – the resource provider *must* log this with their traces to facilitate tracing a single request

Specifies the tracing correlation Id for the request; the resource provider *must* log this so that end-to-end requests can be correlated across Azure.

Gets a string representation of this TrackingContext.

Return a tracking context for a key that is common for a subsystem. It generates a new Guid if the key is not present in the collection.

key to lookup an existing Guid for TrackingId subsystem-specific string like entityName to be used in the tracking context TrackingContext

Return a tracking context for the given trackingId.

TrackingId to use for the tracking context subsystem-specific string like entityName to be used in the tracking context TrackingContext

Return a tracking context for a string of given format: TrackingId:xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx, SystemTracker: xxxxxxx

Generate TrackingContext with a new Guid/TrackingId.

Create a new tracking context with a new Guid/TrackingId and given subsystemId.

subsystem-specific Uri like entity address to be used in the tracking context TrackingContext

Create a new TrackingContext with the given TrackingId and SubsystemId.

Return a tracking context for the given trackingId.

TrackingId to use for the tracking context subsystem-specific string like entityName to be used in the tracking context Specifies the tracing correlation Id for the request; the resource provider *must* log this so that end-to-end requests can be correlated across Azure. A caller-defined value that identifies the given request. If specified, this will be included in response information as a way to map the request. Generally false. Set to true only when the message is received at role boundaries TrackingContext

Return a tracking context for the given trackingId.

TrackingId to use for the tracking context subsystem-specific string like entityName to be used in the tracking context Set to true when the message is received at role boundaries to append role identifier and number, e.g. '_G30' TrackingContext

Return a tracking context using TrackingIdHeader/TrackingIdProperty/MessageId in the WCF message

WCF message subsystem-specific string like entityName to be used in the tracking context Generally false. Set to true when the message is received at role boundaries The web context that will be used to extract tracking information if avaliable. TrackingContext

Used to generate TrackingContext given a WCF message and when the system tracker is not known.

WCF Message that contains the tracking information Generally false. Set to true only when the message is received at role boundaries

Sets the role identifier for the process' app domain. The role identifier field is singleton. It is called externally outside TrackingContext to avoid dependency on Microsoft.WindowsAzure.ServiceRuntime

the Role id Type of the current role

If there is a value in TrackingContext.Current and the message doesn't already contain "TrackingId" then format the message with tracking information.

Ensures the given string contains a TrackingId. If one is already present, nothing occurs. Otherwise TrackingId, Timestamp, and if present, SystemTracker are added.

Extract a TrackingId given a properties and headers collection. Does not write anything back into those collections.

Extract a SubsystemId given a properties and headers collection. Does not write anything back into those collections.

Assign the given TrackingContext to TrackingContext.Current for the given scope. TrackingContext.Scope.Dispose() restores the previous TrackingContext.Current.

The SystemTrackerHeader contains an identifier that uniquely identifies each subsystem entity during its lifetime in the ServiceBus.

Create a new header with empty tracker.

Create a new header with supplied tracker.

The Tracker contained within the header.

Read the SystemTrackerHeader from MessageHeaders.

the MessageHeaders to read from the SystemTrackerHeader if the SystemTrackerHeader header is not present

Remove the SystemTrackerHeader from MessageHeaders.

the MessageHeaders to remove from

Try to read the SystemTrackerHeader from MessageHeaders.

the MessageHeaders the SystemTrackerHeader (out) true, if read successfully; false, otherwise

Gets localized string like: Configuration and Management Powershell cmdlets

Gets localized string like: Host component

Gets localized string like: Gateway component

Gets localized string like: Client component

Gets localized string like: Tranferred activity to the outbound message.

Gets localized string like: Transferred activity to the SetState operation.

Gets localized string like: Transferred activity to the GetState operation.

Gets localized string like: Transferred activity to the Message receive operation.

Gets localized string like: Transferred activity to the Message peek operation.

Gets localized string like: Transferred activity to the RenewLock operation.

Gets localized string like: Attaching activity Id to Connection Activity Id.

Gets localized string like: HybridConnectionManager Service is starting.

Gets localized string like: HybridConnectionManager Service is stopping.

Gets localized string like: HybridConnectionManager Service configuration settings changed.

Gets localized string like: HybridConnectionClient Service is starting.

Gets localized string like: HybridConnectionClient Service is stopping.

Gets localized string like: HybridConnectionClient Service configuration settings changed.

Gets localized string like: Channel {0} used in event {1} is undefined.

Parameter 0 for string: Channel {0} used in event {1} is undefined. Parameter 1 for string: Channel {0} used in event {1} is undefined.

Gets localized string like: Maximum number of arguments '{0}' exceeded.

Parameter 0 for string: Maximum number of arguments '{0}' exceeded.

Gets localized string like: Maximum number of string arguments '{0}' exceeded.

Parameter 0 for string: Maximum number of string arguments '{0}' exceeded.

Gets localized string like: TrackingId: {0}, SubsystemId: {1}. The '{2}' message receiver is abandoning a message. LockToken: '{3}' .

Parameter 0 for string: TrackingId: {0}, SubsystemId: {1}. The '{2}' message receiver is abandoning a message. LockToken: '{3}' . Parameter 1 for string: TrackingId: {0}, SubsystemId: {1}. The '{2}' message receiver is abandoning a message. LockToken: '{3}' . Parameter 2 for string: TrackingId: {0}, SubsystemId: {1}. The '{2}' message receiver is abandoning a message. LockToken: '{3}' . Parameter 3 for string: TrackingId: {0}, SubsystemId: {1}. The '{2}' message receiver is abandoning a message. LockToken: '{3}' .

Gets localized string like: TrackingId: {0}, SubsystemId: {1}. The '{2}' message receiver is completing a message. LockToken: '{3}'.

Parameter 0 for string: TrackingId: {0}, SubsystemId: {1}. The '{2}' message receiver is completing a message. LockToken: '{3}'. Parameter 1 for string: TrackingId: {0}, SubsystemId: {1}. The '{2}' message receiver is completing a message. LockToken: '{3}'. Parameter 2 for string: TrackingId: {0}, SubsystemId: {1}. The '{2}' message receiver is completing a message. LockToken: '{3}'. Parameter 3 for string: TrackingId: {0}, SubsystemId: {1}. The '{2}' message receiver is completing a message. LockToken: '{3}'.

Gets localized string like: TrackingId: {0}, SubsystemId: {1}. The '{2}' message receiver received a message. MessageId '{3}'.

Parameter 0 for string: TrackingId: {0}, SubsystemId: {1}. The '{2}' message receiver received a message. MessageId '{3}'. Parameter 1 for string: TrackingId: {0}, SubsystemId: {1}. The '{2}' message receiver received a message. MessageId '{3}'. Parameter 2 for string: TrackingId: {0}, SubsystemId: {1}. The '{2}' message receiver received a message. MessageId '{3}'. Parameter 3 for string: TrackingId: {0}, SubsystemId: {1}. The '{2}' message receiver received a message. MessageId '{3}'.

Gets localized string like: TrackingId: {0}, SubsystemId: {1}. The '{2}' message sender is sending a message. MessageId '{3}'.

Parameter 0 for string: TrackingId: {0}, SubsystemId: {1}. The '{2}' message sender is sending a message. MessageId '{3}'. Parameter 1 for string: TrackingId: {0}, SubsystemId: {1}. The '{2}' message sender is sending a message. MessageId '{3}'. Parameter 2 for string: TrackingId: {0}, SubsystemId: {1}. The '{2}' message sender is sending a message. MessageId '{3}'. Parameter 3 for string: TrackingId: {0}, SubsystemId: {1}. The '{2}' message sender is sending a message. MessageId '{3}'.

Gets localized string like: A ServiceBus Transport channel has faulted. Type: {0}.

Parameter 0 for string: A ServiceBus Transport channel has faulted. Type: {0}.

Gets localized string like: The ServiceBus Transport channel is abandoning a ReceiveContext. LockToken: '{0}'.

Parameter 0 for string: The ServiceBus Transport channel is abandoning a ReceiveContext. LockToken: '{0}'.

Gets localized string like: The ServiceBus Transport channel is completing a ReceiveContext. LockToken: '{0}'.

Parameter 0 for string: The ServiceBus Transport channel is completing a ReceiveContext. LockToken: '{0}'.

Gets localized string like: The ServiceBus Transport channel is sending a message to address '{0}'. Action '{1}', MessageID '{2}'.

Parameter 0 for string: The ServiceBus Transport channel is sending a message to address '{0}'. Action '{1}', MessageID '{2}'. Parameter 1 for string: The ServiceBus Transport channel is sending a message to address '{0}'. Action '{1}', MessageID '{2}'. Parameter 2 for string: The ServiceBus Transport channel is sending a message to address '{0}'. Action '{1}', MessageID '{2}'.

Gets localized string like: The ServiceBus Transport channel is receiving a message from address '{0}'. Action '{1}', MessageID '{2}'.

Parameter 0 for string: The ServiceBus Transport channel is receiving a message from address '{0}'. Action '{1}', MessageID '{2}'. Parameter 1 for string: The ServiceBus Transport channel is receiving a message from address '{0}'. Action '{1}', MessageID '{2}'. Parameter 2 for string: The ServiceBus Transport channel is receiving a message from address '{0}'. Action '{1}', MessageID '{2}'.

Gets localized string like: TrackingId: {0}, SubsystemId: {1}. The '{2}' message receiver is suspending a message. LockToken: '{3}'.

Parameter 0 for string: TrackingId: {0}, SubsystemId: {1}. The '{2}' message receiver is suspending a message. LockToken: '{3}'. Parameter 1 for string: TrackingId: {0}, SubsystemId: {1}. The '{2}' message receiver is suspending a message. LockToken: '{3}'. Parameter 2 for string: TrackingId: {0}, SubsystemId: {1}. The '{2}' message receiver is suspending a message. LockToken: '{3}'. Parameter 3 for string: TrackingId: {0}, SubsystemId: {1}. The '{2}' message receiver is suspending a message. LockToken: '{3}'.

Gets localized string like: TrackingId: {0}, SubsystemId: {1}. The '{2}' message receiver is deferring a message. LockToken: '{3}'.

Parameter 0 for string: TrackingId: {0}, SubsystemId: {1}. The '{2}' message receiver is deferring a message. LockToken: '{3}'. Parameter 1 for string: TrackingId: {0}, SubsystemId: {1}. The '{2}' message receiver is deferring a message. LockToken: '{3}'. Parameter 2 for string: TrackingId: {0}, SubsystemId: {1}. The '{2}' message receiver is deferring a message. LockToken: '{3}'. Parameter 3 for string: TrackingId: {0}, SubsystemId: {1}. The '{2}' message receiver is deferring a message. LockToken: '{3}'.

Gets localized string like: Log: Operation: '{0}'. Details: {1}.

Parameter 0 for string: Log: Operation: '{0}'. Details: {1}. Parameter 1 for string: Log: Operation: '{0}'. Details: {1}.

Gets localized string like: Log: Operation: '{0}'. Details: {1}.

Parameter 0 for string: Log: Operation: '{0}'. Details: {1}. Parameter 1 for string: Log: Operation: '{0}'. Details: {1}.

Gets localized string like: Retrying operation '{0}'. Attempt: {1}. Reason: {2}.

Parameter 0 for string: Retrying operation '{0}'. Attempt: {1}. Reason: {2}. Parameter 1 for string: Retrying operation '{0}'. Attempt: {1}. Reason: {2}. Parameter 2 for string: Retrying operation '{0}'. Attempt: {1}. Reason: {2}.

Gets localized string like: ThreadNeutralSemaphore for '{0}' failed to be obtained {1} times within {2} ms.

Parameter 0 for string: ThreadNeutralSemaphore for '{0}' failed to be obtained {1} times within {2} ms. Parameter 1 for string: ThreadNeutralSemaphore for '{0}' failed to be obtained {1} times within {2} ms. Parameter 2 for string: ThreadNeutralSemaphore for '{0}' failed to be obtained {1} times within {2} ms.

Gets localized string like: ServiceBus runtime channel is created. Type: {0}, LocalAddress: {1}, RemoteAddress: {2}, Via: {3}, Session: {4}

Parameter 0 for string: ServiceBus runtime channel is created. Type: {0}, LocalAddress: {1}, RemoteAddress: {2}, Via: {3}, Session: {4} Parameter 1 for string: ServiceBus runtime channel is created. Type: {0}, LocalAddress: {1}, RemoteAddress: {2}, Via: {3}, Session: {4} Parameter 2 for string: ServiceBus runtime channel is created. Type: {0}, LocalAddress: {1}, RemoteAddress: {2}, Via: {3}, Session: {4} Parameter 3 for string: ServiceBus runtime channel is created. Type: {0}, LocalAddress: {1}, RemoteAddress: {2}, Via: {3}, Session: {4} Parameter 4 for string: ServiceBus runtime channel is created. Type: {0}, LocalAddress: {1}, RemoteAddress: {2}, Via: {3}, Session: {4}

Gets localized string like: ServiceBus runtime channel is aborting. Type: {0}, LocalAddress: {1}, RemoteAddress: {2}, Via: {3}, Session: {4}

Parameter 0 for string: ServiceBus runtime channel is aborting. Type: {0}, LocalAddress: {1}, RemoteAddress: {2}, Via: {3}, Session: {4} Parameter 1 for string: ServiceBus runtime channel is aborting. Type: {0}, LocalAddress: {1}, RemoteAddress: {2}, Via: {3}, Session: {4} Parameter 2 for string: ServiceBus runtime channel is aborting. Type: {0}, LocalAddress: {1}, RemoteAddress: {2}, Via: {3}, Session: {4} Parameter 3 for string: ServiceBus runtime channel is aborting. Type: {0}, LocalAddress: {1}, RemoteAddress: {2}, Via: {3}, Session: {4} Parameter 4 for string: ServiceBus runtime channel is aborting. Type: {0}, LocalAddress: {1}, RemoteAddress: {2}, Via: {3}, Session: {4}

Gets localized string like: ServiceBus runtime channel is faulting. Type: {0}, LocalAddress: {1}, RemoteAddress: {2}, Via: {3}, Session: {4}, Reason: {5}

Parameter 0 for string: ServiceBus runtime channel is faulting. Type: {0}, LocalAddress: {1}, RemoteAddress: {2}, Via: {3}, Session: {4}, Reason: {5} Parameter 1 for string: ServiceBus runtime channel is faulting. Type: {0}, LocalAddress: {1}, RemoteAddress: {2}, Via: {3}, Session: {4}, Reason: {5} Parameter 2 for string: ServiceBus runtime channel is faulting. Type: {0}, LocalAddress: {1}, RemoteAddress: {2}, Via: {3}, Session: {4}, Reason: {5} Parameter 3 for string: ServiceBus runtime channel is faulting. Type: {0}, LocalAddress: {1}, RemoteAddress: {2}, Via: {3}, Session: {4}, Reason: {5} Parameter 4 for string: ServiceBus runtime channel is faulting. Type: {0}, LocalAddress: {1}, RemoteAddress: {2}, Via: {3}, Session: {4}, Reason: {5} Parameter 5 for string: ServiceBus runtime channel is faulting. Type: {0}, LocalAddress: {1}, RemoteAddress: {2}, Via: {3}, Session: {4}, Reason: {5}

Gets localized string like: ServiceBus runtime channel failed to ping. Type: {0}, LocalAddress: {1}, RemoteAddress: {2}, Via: {3}, Session: {4}, Reason: {5}

Parameter 0 for string: ServiceBus runtime channel failed to ping. Type: {0}, LocalAddress: {1}, RemoteAddress: {2}, Via: {3}, Session: {4}, Reason: {5} Parameter 1 for string: ServiceBus runtime channel failed to ping. Type: {0}, LocalAddress: {1}, RemoteAddress: {2}, Via: {3}, Session: {4}, Reason: {5} Parameter 2 for string: ServiceBus runtime channel failed to ping. Type: {0}, LocalAddress: {1}, RemoteAddress: {2}, Via: {3}, Session: {4}, Reason: {5} Parameter 3 for string: ServiceBus runtime channel failed to ping. Type: {0}, LocalAddress: {1}, RemoteAddress: {2}, Via: {3}, Session: {4}, Reason: {5} Parameter 4 for string: ServiceBus runtime channel failed to ping. Type: {0}, LocalAddress: {1}, RemoteAddress: {2}, Via: {3}, Session: {4}, Reason: {5} Parameter 5 for string: ServiceBus runtime channel failed to ping. Type: {0}, LocalAddress: {1}, RemoteAddress: {2}, Via: {3}, Session: {4}, Reason: {5}

Gets localized string like: ServiceBus runtime channel detected incorrect state before starting ping. Type: {0}, LocalAddress: {1}, RemoteAddress: {2}, Via: {3}, Session: {4}, State: {5}

Parameter 0 for string: ServiceBus runtime channel detected incorrect state before starting ping. Type: {0}, LocalAddress: {1}, RemoteAddress: {2}, Via: {3}, Session: {4}, State: {5} Parameter 1 for string: ServiceBus runtime channel detected incorrect state before starting ping. Type: {0}, LocalAddress: {1}, RemoteAddress: {2}, Via: {3}, Session: {4}, State: {5} Parameter 2 for string: ServiceBus runtime channel detected incorrect state before starting ping. Type: {0}, LocalAddress: {1}, RemoteAddress: {2}, Via: {3}, Session: {4}, State: {5} Parameter 3 for string: ServiceBus runtime channel detected incorrect state before starting ping. Type: {0}, LocalAddress: {1}, RemoteAddress: {2}, Via: {3}, Session: {4}, State: {5} Parameter 4 for string: ServiceBus runtime channel detected incorrect state before starting ping. Type: {0}, LocalAddress: {1}, RemoteAddress: {2}, Via: {3}, Session: {4}, State: {5} Parameter 5 for string: ServiceBus runtime channel detected incorrect state before starting ping. Type: {0}, LocalAddress: {1}, RemoteAddress: {2}, Via: {3}, Session: {4}, State: {5}

Gets localized string like: ServiceBus runtime channel stopping ping because of non-opened state. Type: {0}, LocalAddress: {1}, RemoteAddress: {2}, Via: {3}, Session: {4}, State: {5}, PendingRequestCount: {6}

Parameter 0 for string: ServiceBus runtime channel stopping ping because of non-opened state. Type: {0}, LocalAddress: {1}, RemoteAddress: {2}, Via: {3}, Session: {4}, State: {5}, PendingRequestCount: {6} Parameter 1 for string: ServiceBus runtime channel stopping ping because of non-opened state. Type: {0}, LocalAddress: {1}, RemoteAddress: {2}, Via: {3}, Session: {4}, State: {5}, PendingRequestCount: {6} Parameter 2 for string: ServiceBus runtime channel stopping ping because of non-opened state. Type: {0}, LocalAddress: {1}, RemoteAddress: {2}, Via: {3}, Session: {4}, State: {5}, PendingRequestCount: {6} Parameter 3 for string: ServiceBus runtime channel stopping ping because of non-opened state. Type: {0}, LocalAddress: {1}, RemoteAddress: {2}, Via: {3}, Session: {4}, State: {5}, PendingRequestCount: {6} Parameter 4 for string: ServiceBus runtime channel stopping ping because of non-opened state. Type: {0}, LocalAddress: {1}, RemoteAddress: {2}, Via: {3}, Session: {4}, State: {5}, PendingRequestCount: {6} Parameter 5 for string: ServiceBus runtime channel stopping ping because of non-opened state. Type: {0}, LocalAddress: {1}, RemoteAddress: {2}, Via: {3}, Session: {4}, State: {5}, PendingRequestCount: {6} Parameter 6 for string: ServiceBus runtime channel stopping ping because of non-opened state. Type: {0}, LocalAddress: {1}, RemoteAddress: {2}, Via: {3}, Session: {4}, State: {5}, PendingRequestCount: {6}

Gets localized string like: [TrackingId:{0}] {1}: Operation {2} at iteration {3} is retrying after {4} sleep because of {5}:{6}.

Parameter 0 for string: [TrackingId:{0}] {1}: Operation {2} at iteration {3} is retrying after {4} sleep because of {5}:{6}. Parameter 1 for string: [TrackingId:{0}] {1}: Operation {2} at iteration {3} is retrying after {4} sleep because of {5}:{6}. Parameter 2 for string: [TrackingId:{0}] {1}: Operation {2} at iteration {3} is retrying after {4} sleep because of {5}:{6}. Parameter 3 for string: [TrackingId:{0}] {1}: Operation {2} at iteration {3} is retrying after {4} sleep because of {5}:{6}. Parameter 4 for string: [TrackingId:{0}] {1}: Operation {2} at iteration {3} is retrying after {4} sleep because of {5}:{6}. Parameter 5 for string: [TrackingId:{0}] {1}: Operation {2} at iteration {3} is retrying after {4} sleep because of {5}:{6}. Parameter 6 for string: [TrackingId:{0}] {1}: Operation {2} at iteration {3} is retrying after {4} sleep because of {5}:{6}.

Gets localized string like: [TrackingId:{0}] Entity '{1}' abort failed with {2}:{3}.

Parameter 0 for string: [TrackingId:{0}] Entity '{1}' abort failed with {2}:{3}. Parameter 1 for string: [TrackingId:{0}] Entity '{1}' abort failed with {2}:{3}. Parameter 2 for string: [TrackingId:{0}] Entity '{1}' abort failed with {2}:{3}. Parameter 3 for string: [TrackingId:{0}] Entity '{1}' abort failed with {2}:{3}.

Gets localized string like: [TrackingId:{0}] {1}: Operation {2} cannot retry because stream does not support seeking.

Parameter 0 for string: [TrackingId:{0}] {1}: Operation {2} cannot retry because stream does not support seeking. Parameter 1 for string: [TrackingId:{0}] {1}: Operation {2} cannot retry because stream does not support seeking. Parameter 2 for string: [TrackingId:{0}] {1}: Operation {2} cannot retry because stream does not support seeking.

Gets localized string like: [TrackingId:{0}] {1}: Operation {2} cannot retry because brokered message's stream cannot be cloned. [{3}]:{4}

Parameter 0 for string: [TrackingId:{0}] {1}: Operation {2} cannot retry because brokered message's stream cannot be cloned. [{3}]:{4} Parameter 1 for string: [TrackingId:{0}] {1}: Operation {2} cannot retry because brokered message's stream cannot be cloned. [{3}]:{4} Parameter 2 for string: [TrackingId:{0}] {1}: Operation {2} cannot retry because brokered message's stream cannot be cloned. [{3}]:{4} Parameter 3 for string: [TrackingId:{0}] {1}: Operation {2} cannot retry because brokered message's stream cannot be cloned. [{3}]:{4} Parameter 4 for string: [TrackingId:{0}] {1}: Operation {2} cannot retry because brokered message's stream cannot be cloned. [{3}]:{4}

Gets localized string like: AppDomain unloading. AppDomain.FriendlyName {0}, ProcessName {1}, ProcessId {2}.

Parameter 0 for string: AppDomain unloading. AppDomain.FriendlyName {0}, ProcessName {1}, ProcessId {2}. Parameter 1 for string: AppDomain unloading. AppDomain.FriendlyName {0}, ProcessName {1}, ProcessId {2}. Parameter 2 for string: AppDomain unloading. AppDomain.FriendlyName {0}, ProcessName {1}, ProcessId {2}.

Gets localized string like: An unexpected failure occurred. Applications should not attempt to handle this error. For diagnostic purposes, this English message is associated with the failure: {0}.

Parameter 0 for string: An unexpected failure occurred. Applications should not attempt to handle this error. For diagnostic purposes, this English message is associated with the failure: {0}.

Gets localized string like: Throwing an exception. Details: {0}.

Parameter 0 for string: Throwing an exception. Details: {0}.

Gets localized string like: Throwing an exception. Details: {0}.

Parameter 0 for string: Throwing an exception. Details: {0}.

Gets localized string like: Throwing an exception. Details: {0}.

Parameter 0 for string: Throwing an exception. Details: {0}.

Gets localized string like: Throwing an exception. Details: {0}.

Parameter 0 for string: Throwing an exception. Details: {0}.

Gets localized string like: Unhandled exception. Source {0}

Parameter 0 for string: Unhandled exception. Source {0}

Gets localized string like: Wrote to the EventLog. Data {0}

Parameter 0 for string: Wrote to the EventLog. Data {0}

Gets localized string like: Wrote to the EventLog. Data {0}

Parameter 0 for string: Wrote to the EventLog. Data {0}

Gets localized string like: Wrote to the EventLog. Data {0}

Parameter 0 for string: Wrote to the EventLog. Data {0}

Gets localized string like: Wrote to the EventLog. Data {0}

Parameter 0 for string: Wrote to the EventLog. Data {0}

Gets localized string like: Handling an exception. Source {0}

Parameter 0 for string: Handling an exception. Source {0}

Gets localized string like: {0} loaded an instance (key = {1}, value = {2}).

Parameter 0 for string: {0} loaded an instance (key = {1}, value = {2}). Parameter 1 for string: {0} loaded an instance (key = {1}, value = {2}). Parameter 2 for string: {0} loaded an instance (key = {1}, value = {2}).

Gets localized string like: {0} failed to load an instance (key = {1}, value = {2}) due to an error {3}.

Parameter 0 for string: {0} failed to load an instance (key = {1}, value = {2}) due to an error {3}. Parameter 1 for string: {0} failed to load an instance (key = {1}, value = {2}) due to an error {3}. Parameter 2 for string: {0} failed to load an instance (key = {1}, value = {2}) due to an error {3}. Parameter 3 for string: {0} failed to load an instance (key = {1}, value = {2}) due to an error {3}.

Gets localized string like: Exception details: '{0}'

Parameter 0 for string: Exception details: '{0}'

Gets localized string like: Exception details: '{0}'

Parameter 0 for string: Exception details: '{0}'

Gets localized string like: An exception was handled. Affected entity name {0}, Exception message {1}, Stack Trace {2}

Parameter 0 for string: An exception was handled. Affected entity name {0}, Exception message {1}, Stack Trace {2} Parameter 1 for string: An exception was handled. Affected entity name {0}, Exception message {1}, Stack Trace {2} Parameter 2 for string: An exception was handled. Affected entity name {0}, Exception message {1}, Stack Trace {2}

Gets localized string like: Details: {0}.

Parameter 0 for string: Details: {0}.

Gets localized string like: An exception was handled at {0}. Exception: {1}. {2}

Parameter 0 for string: An exception was handled at {0}. Exception: {1}. {2} Parameter 1 for string: An exception was handled at {0}. Exception: {1}. {2} Parameter 2 for string: An exception was handled at {0}. Exception: {1}. {2}

Gets localized string like: An exception was handled at {0}.{1}. {2} {3} Exception: {4}

Parameter 0 for string: An exception was handled at {0}.{1}. {2} {3} Exception: {4} Parameter 1 for string: An exception was handled at {0}.{1}. {2} {3} Exception: {4} Parameter 2 for string: An exception was handled at {0}.{1}. {2} {3} Exception: {4} Parameter 3 for string: An exception was handled at {0}.{1}. {2} {3} Exception: {4} Parameter 4 for string: An exception was handled at {0}.{1}. {2} {3} Exception: {4}

Gets localized string like: Non-serializable exception was handled. Exception: '{0}'

Parameter 0 for string: Non-serializable exception was handled. Exception: '{0}'

Gets localized string like: TrackingId: {0}, SubsystemId: {1}. The '{2}' message receiver is renewing a message. LockToken: '{3}'.

Parameter 0 for string: TrackingId: {0}, SubsystemId: {1}. The '{2}' message receiver is renewing a message. LockToken: '{3}'. Parameter 1 for string: TrackingId: {0}, SubsystemId: {1}. The '{2}' message receiver is renewing a message. LockToken: '{3}'. Parameter 2 for string: TrackingId: {0}, SubsystemId: {1}. The '{2}' message receiver is renewing a message. LockToken: '{3}'. Parameter 3 for string: TrackingId: {0}, SubsystemId: {1}. The '{2}' message receiver is renewing a message. LockToken: '{3}'.

Gets localized string like: TrackingId: {0}, SubsystemId: {1}. BatchManager is executing a batched object with a new tracking ID ({2}).

Parameter 0 for string: TrackingId: {0}, SubsystemId: {1}. BatchManager is executing a batched object with a new tracking ID ({2}). Parameter 1 for string: TrackingId: {0}, SubsystemId: {1}. BatchManager is executing a batched object with a new tracking ID ({2}). Parameter 2 for string: TrackingId: {0}, SubsystemId: {1}. BatchManager is executing a batched object with a new tracking ID ({2}).

Gets localized string like: TrackingId: {0}, SubsystemId: {1}. BatchManager encountered an exception. Function: {2}, Exception: {3}.

Parameter 0 for string: TrackingId: {0}, SubsystemId: {1}. BatchManager encountered an exception. Function: {2}, Exception: {3}. Parameter 1 for string: TrackingId: {0}, SubsystemId: {1}. BatchManager encountered an exception. Function: {2}, Exception: {3}. Parameter 2 for string: TrackingId: {0}, SubsystemId: {1}. BatchManager encountered an exception. Function: {2}, Exception: {3}. Parameter 3 for string: TrackingId: {0}, SubsystemId: {1}. BatchManager encountered an exception. Function: {2}, Exception: {3}.

Gets localized string like: TrackingId: {0}, SubsystemId: {1}. The result of BatchManager transaction is in-doubt. Transaction Id = {2}, Rollback called = {3}.

Parameter 0 for string: TrackingId: {0}, SubsystemId: {1}. The result of BatchManager transaction is in-doubt. Transaction Id = {2}, Rollback called = {3}. Parameter 1 for string: TrackingId: {0}, SubsystemId: {1}. The result of BatchManager transaction is in-doubt. Transaction Id = {2}, Rollback called = {3}. Parameter 2 for string: TrackingId: {0}, SubsystemId: {1}. The result of BatchManager transaction is in-doubt. Transaction Id = {2}, Rollback called = {3}. Parameter 3 for string: TrackingId: {0}, SubsystemId: {1}. The result of BatchManager transaction is in-doubt. Transaction Id = {2}, Rollback called = {3}.

Gets localized string like: Critical error occurred and running process was terminated. Error message is {0}.

Parameter 0 for string: Critical error occurred and running process was terminated. Error message is {0}.

Gets localized string like: TrackingId: {0}, SubsystemId: {1}. AcceptSession request started. Entity = {2}, SessionId = {3}.

Parameter 0 for string: TrackingId: {0}, SubsystemId: {1}. AcceptSession request started. Entity = {2}, SessionId = {3}. Parameter 1 for string: TrackingId: {0}, SubsystemId: {1}. AcceptSession request started. Entity = {2}, SessionId = {3}. Parameter 2 for string: TrackingId: {0}, SubsystemId: {1}. AcceptSession request started. Entity = {2}, SessionId = {3}. Parameter 3 for string: TrackingId: {0}, SubsystemId: {1}. AcceptSession request started. Entity = {2}, SessionId = {3}.

Gets localized string like: TrackingId: {0}, SubsystemId: {1}. AcceptSession request ended. Entity = {2}, SessionId = {3}.

Parameter 0 for string: TrackingId: {0}, SubsystemId: {1}. AcceptSession request ended. Entity = {2}, SessionId = {3}. Parameter 1 for string: TrackingId: {0}, SubsystemId: {1}. AcceptSession request ended. Entity = {2}, SessionId = {3}. Parameter 2 for string: TrackingId: {0}, SubsystemId: {1}. AcceptSession request ended. Entity = {2}, SessionId = {3}. Parameter 3 for string: TrackingId: {0}, SubsystemId: {1}. AcceptSession request ended. Entity = {2}, SessionId = {3}.

Gets localized string like: TrackingId: {0}, SubsystemId: {1}. AcceptSession request failed. Entity = {2}, SessionId = {3}, Error = {4}.

Parameter 0 for string: TrackingId: {0}, SubsystemId: {1}. AcceptSession request failed. Entity = {2}, SessionId = {3}, Error = {4}. Parameter 1 for string: TrackingId: {0}, SubsystemId: {1}. AcceptSession request failed. Entity = {2}, SessionId = {3}, Error = {4}. Parameter 2 for string: TrackingId: {0}, SubsystemId: {1}. AcceptSession request failed. Entity = {2}, SessionId = {3}, Error = {4}. Parameter 3 for string: TrackingId: {0}, SubsystemId: {1}. AcceptSession request failed. Entity = {2}, SessionId = {3}, Error = {4}. Parameter 4 for string: TrackingId: {0}, SubsystemId: {1}. AcceptSession request failed. Entity = {2}, SessionId = {3}, Error = {4}.

Gets localized string like: {0}: {1} {2}.

Parameter 0 for string: {0}: {1} {2}. Parameter 1 for string: {0}: {1} {2}. Parameter 2 for string: {0}: {1} {2}.

Gets localized string like: {0}: {1} {2}.

Parameter 0 for string: {0}: {1} {2}. Parameter 1 for string: {0}: {1} {2}. Parameter 2 for string: {0}: {1} {2}.

Gets localized string like: {0}: Operation {1} failed with error {2}.

Parameter 0 for string: {0}: Operation {1} failed with error {2}. Parameter 1 for string: {0}: Operation {1} failed with error {2}. Parameter 2 for string: {0}: Operation {1} failed with error {2}.

Gets localized string like: {0}: Add {1} (local-channel={2}, remote-channel={3}).

Parameter 0 for string: {0}: Add {1} (local-channel={2}, remote-channel={3}). Parameter 1 for string: {0}: Add {1} (local-channel={2}, remote-channel={3}). Parameter 2 for string: {0}: Add {1} (local-channel={2}, remote-channel={3}). Parameter 3 for string: {0}: Add {1} (local-channel={2}, remote-channel={3}).

Gets localized string like: {0}: Remove {1} (local-channel={2}, remote-channel={3}).

Parameter 0 for string: {0}: Remove {1} (local-channel={2}, remote-channel={3}). Parameter 1 for string: {0}: Remove {1} (local-channel={2}, remote-channel={3}). Parameter 2 for string: {0}: Remove {1} (local-channel={2}, remote-channel={3}). Parameter 3 for string: {0}: Remove {1} (local-channel={2}, remote-channel={3}).

Gets localized string like: {0}: Dispose delivery (id={1}, settled={2}, state={3}).

Parameter 0 for string: {0}: Dispose delivery (id={1}, settled={2}, state={3}). Parameter 1 for string: {0}: Dispose delivery (id={1}, settled={2}, state={3}). Parameter 2 for string: {0}: Dispose delivery (id={1}, settled={2}, state={3}). Parameter 3 for string: {0}: Dispose delivery (id={1}, settled={2}, state={3}).

Gets localized string like: {0}: The delivery tag {1} was not found in the unsettled map.

Parameter 0 for string: {0}: The delivery tag {1} was not found in the unsettled map. Parameter 1 for string: {0}: The delivery tag {1} was not found in the unsettled map.

Gets localized string like: {0}: Action {1} changed the state from {2} to {3}.

Parameter 0 for string: {0}: Action {1} changed the state from {2} to {3}. Parameter 1 for string: {0}: Action {1} changed the state from {2} to {3}. Parameter 2 for string: {0}: Action {1} changed the state from {2} to {3}. Parameter 3 for string: {0}: Action {1} changed the state from {2} to {3}.

Gets localized string like: {0}:{1}: Attach {2} (local handle={3}, remote handle={4}, name={5}, role={6}) {7}, {8}.

Parameter 0 for string: {0}:{1}: Attach {2} (local handle={3}, remote handle={4}, name={5}, role={6}) {7}, {8}. Parameter 1 for string: {0}:{1}: Attach {2} (local handle={3}, remote handle={4}, name={5}, role={6}) {7}, {8}. Parameter 2 for string: {0}:{1}: Attach {2} (local handle={3}, remote handle={4}, name={5}, role={6}) {7}, {8}. Parameter 3 for string: {0}:{1}: Attach {2} (local handle={3}, remote handle={4}, name={5}, role={6}) {7}, {8}. Parameter 4 for string: {0}:{1}: Attach {2} (local handle={3}, remote handle={4}, name={5}, role={6}) {7}, {8}. Parameter 5 for string: {0}:{1}: Attach {2} (local handle={3}, remote handle={4}, name={5}, role={6}) {7}, {8}. Parameter 6 for string: {0}:{1}: Attach {2} (local handle={3}, remote handle={4}, name={5}, role={6}) {7}, {8}. Parameter 7 for string: {0}:{1}: Attach {2} (local handle={3}, remote handle={4}, name={5}, role={6}) {7}, {8}. Parameter 8 for string: {0}:{1}: Attach {2} (local handle={3}, remote handle={4}, name={5}, role={6}) {7}, {8}.

Gets localized string like: {0}:{1}: Remove {2} (local handle={3}, remote handle={4}, name={5}).

Parameter 0 for string: {0}:{1}: Remove {2} (local handle={3}, remote handle={4}, name={5}). Parameter 1 for string: {0}:{1}: Remove {2} (local handle={3}, remote handle={4}, name={5}). Parameter 2 for string: {0}:{1}: Remove {2} (local handle={3}, remote handle={4}, name={5}). Parameter 3 for string: {0}:{1}: Remove {2} (local handle={3}, remote handle={4}, name={5}). Parameter 4 for string: {0}:{1}: Remove {2} (local handle={3}, remote handle={4}, name={5}). Parameter 5 for string: {0}:{1}: Remove {2} (local handle={3}, remote handle={4}, name={5}).

Gets localized string like: {0}:{1}:{2}: Handle I/O event {3} (current queue size {4}).

Parameter 0 for string: {0}:{1}:{2}: Handle I/O event {3} (current queue size {4}). Parameter 1 for string: {0}:{1}:{2}: Handle I/O event {3} (current queue size {4}). Parameter 2 for string: {0}:{1}:{2}: Handle I/O event {3} (current queue size {4}). Parameter 3 for string: {0}:{1}:{2}: Handle I/O event {3} (current queue size {4}). Parameter 4 for string: {0}:{1}:{2}: Handle I/O event {3} (current queue size {4}).

Gets localized string like: {0}: Receive {1} (transfer count={2}).

Parameter 0 for string: {0}: Receive {1} (transfer count={2}). Parameter 1 for string: {0}: Receive {1} (transfer count={2}). Parameter 2 for string: {0}: Receive {1} (transfer count={2}).

Gets localized string like: {0}: Caching {1} to message queue (CurrentQueueSize={2}, IsPrefetchingBySize={3}, TotalCacheSizeInBytes={4}, TotalLinkCredit={5}, CurrentLinkCredit={6}).

Parameter 0 for string: {0}: Caching {1} to message queue (CurrentQueueSize={2}, IsPrefetchingBySize={3}, TotalCacheSizeInBytes={4}, TotalLinkCredit={5}, CurrentLinkCredit={6}). Parameter 1 for string: {0}: Caching {1} to message queue (CurrentQueueSize={2}, IsPrefetchingBySize={3}, TotalCacheSizeInBytes={4}, TotalLinkCredit={5}, CurrentLinkCredit={6}). Parameter 2 for string: {0}: Caching {1} to message queue (CurrentQueueSize={2}, IsPrefetchingBySize={3}, TotalCacheSizeInBytes={4}, TotalLinkCredit={5}, CurrentLinkCredit={6}). Parameter 3 for string: {0}: Caching {1} to message queue (CurrentQueueSize={2}, IsPrefetchingBySize={3}, TotalCacheSizeInBytes={4}, TotalLinkCredit={5}, CurrentLinkCredit={6}). Parameter 4 for string: {0}: Caching {1} to message queue (CurrentQueueSize={2}, IsPrefetchingBySize={3}, TotalCacheSizeInBytes={4}, TotalLinkCredit={5}, CurrentLinkCredit={6}). Parameter 5 for string: {0}: Caching {1} to message queue (CurrentQueueSize={2}, IsPrefetchingBySize={3}, TotalCacheSizeInBytes={4}, TotalLinkCredit={5}, CurrentLinkCredit={6}). Parameter 6 for string: {0}: Caching {1} to message queue (CurrentQueueSize={2}, IsPrefetchingBySize={3}, TotalCacheSizeInBytes={4}, TotalLinkCredit={5}, CurrentLinkCredit={6}).

Gets localized string like: {0}: Upgrade transport {1} to {2}.

Parameter 0 for string: {0}: Upgrade transport {1} to {2}. Parameter 1 for string: {0}: Upgrade transport {1} to {2}. Parameter 2 for string: {0}: Upgrade transport {1} to {2}.

Gets localized string like: {0}: Close transport {1} (isSecure={2}, isAuthenticated={3}) because it does not meet the security requirements.

Parameter 0 for string: {0}: Close transport {1} (isSecure={2}, isAuthenticated={3}) because it does not meet the security requirements. Parameter 1 for string: {0}: Close transport {1} (isSecure={2}, isAuthenticated={3}) because it does not meet the security requirements. Parameter 2 for string: {0}: Close transport {1} (isSecure={2}, isAuthenticated={3}) because it does not meet the security requirements. Parameter 3 for string: {0}: Close transport {1} (isSecure={2}, isAuthenticated={3}) because it does not meet the security requirements.

Gets localized string like: {0}: Fail to open object {1} (name='{2}') for entity '{3}'. Error: {4}.

Parameter 0 for string: {0}: Fail to open object {1} (name='{2}') for entity '{3}'. Error: {4}. Parameter 1 for string: {0}: Fail to open object {1} (name='{2}') for entity '{3}'. Error: {4}. Parameter 2 for string: {0}: Fail to open object {1} (name='{2}') for entity '{3}'. Error: {4}. Parameter 3 for string: {0}: Fail to open object {1} (name='{2}') for entity '{3}'. Error: {4}. Parameter 4 for string: {0}: Fail to open object {1} (name='{2}') for entity '{3}'. Error: {4}.

Gets localized string like: {0}: Open {1} (name='{2}') for entity '{3}' succeeded.

Parameter 0 for string: {0}: Open {1} (name='{2}') for entity '{3}' succeeded. Parameter 1 for string: {0}: Open {1} (name='{2}') for entity '{3}' succeeded. Parameter 2 for string: {0}: Open {1} (name='{2}') for entity '{3}' succeeded. Parameter 3 for string: {0}: Open {1} (name='{2}') for entity '{3}' succeeded.

Gets localized string like: Detecting connectivity mode failed: EndPoint: {0}, TriedMode:{1}

Parameter 0 for string: Detecting connectivity mode failed: EndPoint: {0}, TriedMode:{1} Parameter 1 for string: Detecting connectivity mode failed: EndPoint: {0}, TriedMode:{1}

Gets localized string like: Detecting connectivity mode succeeded: EndPoint: {0}, TriedMode: {1}

Parameter 0 for string: Detecting connectivity mode succeeded: EndPoint: {0}, TriedMode: {1} Parameter 1 for string: Detecting connectivity mode succeeded: EndPoint: {0}, TriedMode: {1}

Gets localized string like: Link redirection detected for link:{0}. redirectEndpoint:'{1}', redirectHostName:'{2}', redirectedNetworkHost:'{3}', port:'{4}'.

Parameter 0 for string: Link redirection detected for link:{0}. redirectEndpoint:'{1}', redirectHostName:'{2}', redirectedNetworkHost:'{3}', port:'{4}'. Parameter 1 for string: Link redirection detected for link:{0}. redirectEndpoint:'{1}', redirectHostName:'{2}', redirectedNetworkHost:'{3}', port:'{4}'. Parameter 2 for string: Link redirection detected for link:{0}. redirectEndpoint:'{1}', redirectHostName:'{2}', redirectedNetworkHost:'{3}', port:'{4}'. Parameter 3 for string: Link redirection detected for link:{0}. redirectEndpoint:'{1}', redirectHostName:'{2}', redirectedNetworkHost:'{3}', port:'{4}'. Parameter 4 for string: Link redirection detected for link:{0}. redirectEndpoint:'{1}', redirectHostName:'{2}', redirectedNetworkHost:'{3}', port:'{4}'.

Gets localized string like: Link redirection completed for link:{0}. redirectEndpoint:'{1}', redirectHostName:'{2}', redirectedNetworkHost:'{3}', port:'{4}'.

Parameter 0 for string: Link redirection completed for link:{0}. redirectEndpoint:'{1}', redirectHostName:'{2}', redirectedNetworkHost:'{3}', port:'{4}'. Parameter 1 for string: Link redirection completed for link:{0}. redirectEndpoint:'{1}', redirectHostName:'{2}', redirectedNetworkHost:'{3}', port:'{4}'. Parameter 2 for string: Link redirection completed for link:{0}. redirectEndpoint:'{1}', redirectHostName:'{2}', redirectedNetworkHost:'{3}', port:'{4}'. Parameter 3 for string: Link redirection completed for link:{0}. redirectEndpoint:'{1}', redirectHostName:'{2}', redirectedNetworkHost:'{3}', port:'{4}'. Parameter 4 for string: Link redirection completed for link:{0}. redirectEndpoint:'{1}', redirectHostName:'{2}', redirectedNetworkHost:'{3}', port:'{4}'.

Gets localized string like: Link redirection completed for link:{0}. redirectEndpoint:'{1}', redirectHostName:'{2}', redirectedNetworkHost:'{3}', port:'{4}', error:'{5}'.

Parameter 0 for string: Link redirection completed for link:{0}. redirectEndpoint:'{1}', redirectHostName:'{2}', redirectedNetworkHost:'{3}', port:'{4}', error:'{5}'. Parameter 1 for string: Link redirection completed for link:{0}. redirectEndpoint:'{1}', redirectHostName:'{2}', redirectedNetworkHost:'{3}', port:'{4}', error:'{5}'. Parameter 2 for string: Link redirection completed for link:{0}. redirectEndpoint:'{1}', redirectHostName:'{2}', redirectedNetworkHost:'{3}', port:'{4}', error:'{5}'. Parameter 3 for string: Link redirection completed for link:{0}. redirectEndpoint:'{1}', redirectHostName:'{2}', redirectedNetworkHost:'{3}', port:'{4}', error:'{5}'. Parameter 4 for string: Link redirection completed for link:{0}. redirectEndpoint:'{1}', redirectHostName:'{2}', redirectedNetworkHost:'{3}', port:'{4}', error:'{5}'. Parameter 5 for string: Link redirection completed for link:{0}. redirectEndpoint:'{1}', redirectHostName:'{2}', redirectedNetworkHost:'{3}', port:'{4}', error:'{5}'.

Gets localized string like: EnableLinkRedirect for factoryAddress '{0}' is set to: '{1}', with redirection setting: '{2}'.

Parameter 0 for string: EnableLinkRedirect for factoryAddress '{0}' is set to: '{1}', with redirection setting: '{2}'. Parameter 1 for string: EnableLinkRedirect for factoryAddress '{0}' is set to: '{1}', with redirection setting: '{2}'. Parameter 2 for string: EnableLinkRedirect for factoryAddress '{0}' is set to: '{1}', with redirection setting: '{2}'.

Gets localized string like: Auto-redirect disabled for namespace: '{0}', entity: '{1}' due to more than '{2}' errors have been encountered.

Parameter 0 for string: Auto-redirect disabled for namespace: '{0}', entity: '{1}' due to more than '{2}' errors have been encountered. Parameter 1 for string: Auto-redirect disabled for namespace: '{0}', entity: '{1}' due to more than '{2}' errors have been encountered. Parameter 2 for string: Auto-redirect disabled for namespace: '{0}', entity: '{1}' due to more than '{2}' errors have been encountered.

Gets localized string like: Continuous error count has changed to: '{2}', for namespace: '{0}', entity: '{1}'.

Parameter 0 for string: Continuous error count has changed to: '{2}', for namespace: '{0}', entity: '{1}'. Parameter 1 for string: Continuous error count has changed to: '{2}', for namespace: '{0}', entity: '{1}'. Parameter 2 for string: Continuous error count has changed to: '{2}', for namespace: '{0}', entity: '{1}'.

Gets localized string like: Link manager is performing '{0}' on link '{1}' (info: {2}).

Parameter 0 for string: Link manager is performing '{0}' on link '{1}' (info: {2}). Parameter 1 for string: Link manager is performing '{0}' on link '{1}' (info: {2}). Parameter 2 for string: Link manager is performing '{0}' on link '{1}' (info: {2}).

Gets localized string like: The listener {0} encountered an error during accept (retry:{1}). Error: {2}.

Parameter 0 for string: The listener {0} encountered an error during accept (retry:{1}). Error: {2}. Parameter 1 for string: The listener {0} encountered an error during accept (retry:{1}). Error: {2}. Parameter 2 for string: The listener {0} encountered an error during accept (retry:{1}). Error: {2}.

Gets localized string like: {0}: The {1} buffer size is dynamically changed from {2} to {3}.

Parameter 0 for string: {0}: The {1} buffer size is dynamically changed from {2} to {3}. Parameter 1 for string: {0}: The {1} buffer size is dynamically changed from {2} to {3}. Parameter 2 for string: {0}: The {1} buffer size is dynamically changed from {2} to {3}. Parameter 3 for string: {0}: The {1} buffer size is dynamically changed from {2} to {3}.

Gets localized string like: {0}:{1} The object of type {2} cannot be found using handle {3}.

Parameter 0 for string: {0}:{1} The object of type {2} cannot be found using handle {3}. Parameter 1 for string: {0}:{1} The object of type {2} cannot be found using handle {3}. Parameter 2 for string: {0}:{1} The object of type {2} cannot be found using handle {3}. Parameter 3 for string: {0}:{1} The object of type {2} cannot be found using handle {3}.

Gets localized string like: {0}:{1} The session window is 0. Initial value is {2}. Next id is {3}.

Parameter 0 for string: {0}:{1} The session window is 0. Initial value is {2}. Next id is {3}. Parameter 1 for string: {0}:{1} The session window is 0. Initial value is {2}. Next id is {3}. Parameter 2 for string: {0}:{1} The session window is 0. Initial value is {2}. Next id is {3}. Parameter 3 for string: {0}:{1} The session window is 0. Initial value is {2}. Next id is {3}.

Gets localized string like: {0}: The link (name='{1}', handle={2}) is being detached. Action: {3}, Error: {4}

Parameter 0 for string: {0}: The link (name='{1}', handle={2}) is being detached. Action: {3}, Error: {4} Parameter 1 for string: {0}: The link (name='{1}', handle={2}) is being detached. Action: {3}, Error: {4} Parameter 2 for string: {0}: The link (name='{1}', handle={2}) is being detached. Action: {3}, Error: {4} Parameter 3 for string: {0}: The link (name='{1}', handle={2}) is being detached. Action: {3}, Error: {4} Parameter 4 for string: {0}: The link (name='{1}', handle={2}) is being detached. Action: {3}, Error: {4}

Gets localized string like: The buffer manager '{0}' has high take count {1} (buffers taken are not returned).

Parameter 0 for string: The buffer manager '{0}' has high take count {1} (buffers taken are not returned). Parameter 1 for string: The buffer manager '{0}' has high take count {1} (buffers taken are not returned).

Gets localized string like: {0}: namespace: {1}, operation: {2}, duration (ticks): {3}, total bytes: {4}, frame count: {5}.

Parameter 0 for string: {0}: namespace: {1}, operation: {2}, duration (ticks): {3}, total bytes: {4}, frame count: {5}. Parameter 1 for string: {0}: namespace: {1}, operation: {2}, duration (ticks): {3}, total bytes: {4}, frame count: {5}. Parameter 2 for string: {0}: namespace: {1}, operation: {2}, duration (ticks): {3}, total bytes: {4}, frame count: {5}. Parameter 3 for string: {0}: namespace: {1}, operation: {2}, duration (ticks): {3}, total bytes: {4}, frame count: {5}. Parameter 4 for string: {0}: namespace: {1}, operation: {2}, duration (ticks): {3}, total bytes: {4}, frame count: {5}. Parameter 5 for string: {0}: namespace: {1}, operation: {2}, duration (ticks): {3}, total bytes: {4}, frame count: {5}.

Gets localized string like: Encountered unexpected exception type {0} during BeginSend

Parameter 0 for string: Encountered unexpected exception type {0} during BeginSend

Gets localized string like: Failed to create transfer queue '{0}' in namespace '{1}'. Will retry. Exception: {2}

Parameter 0 for string: Failed to create transfer queue '{0}' in namespace '{1}'. Will retry. Exception: {2} Parameter 1 for string: Failed to create transfer queue '{0}' in namespace '{1}'. Will retry. Exception: {2} Parameter 2 for string: Failed to create transfer queue '{0}' in namespace '{1}'. Will retry. Exception: {2}

Gets localized string like: Failed to create transfer queue '{0}' in namespace '{1}'. Will not retry. Exception: {2}

Parameter 0 for string: Failed to create transfer queue '{0}' in namespace '{1}'. Will not retry. Exception: {2} Parameter 1 for string: Failed to create transfer queue '{0}' in namespace '{1}'. Will not retry. Exception: {2} Parameter 2 for string: Failed to create transfer queue '{0}' in namespace '{1}'. Will not retry. Exception: {2}

Gets localized string like: Paired namespace dead letter had an issue. Namespace '{0}', entity '{1}'. Exception: '{2}'.

Parameter 0 for string: Paired namespace dead letter had an issue. Namespace '{0}', entity '{1}'. Exception: '{2}'. Parameter 1 for string: Paired namespace dead letter had an issue. Namespace '{0}', entity '{1}'. Exception: '{2}'. Parameter 2 for string: Paired namespace dead letter had an issue. Namespace '{0}', entity '{1}'. Exception: '{2}'.

Gets localized string like: Paired namespace send failed getting messages to the destination. Namespace '{0}', entity '{1}'. Exception: '{2}'.

Parameter 0 for string: Paired namespace send failed getting messages to the destination. Namespace '{0}', entity '{1}'. Exception: '{2}'. Parameter 1 for string: Paired namespace send failed getting messages to the destination. Namespace '{0}', entity '{1}'. Exception: '{2}'. Parameter 2 for string: Paired namespace send failed getting messages to the destination. Namespace '{0}', entity '{1}'. Exception: '{2}'.

Gets localized string like: Error creating message sender. Namespace '{0}', entity '{1}', error '{2}'.

Parameter 0 for string: Error creating message sender. Namespace '{0}', entity '{1}', error '{2}'. Parameter 1 for string: Error creating message sender. Namespace '{0}', entity '{1}', error '{2}'. Parameter 2 for string: Error creating message sender. Namespace '{0}', entity '{1}', error '{2}'.

Gets localized string like: Paired namespace: Message received from namespace '{0}', entity '{1}' had no path set. Message ID: '{2}'.

Parameter 0 for string: Paired namespace: Message received from namespace '{0}', entity '{1}' had no path set. Message ID: '{2}'. Parameter 1 for string: Paired namespace: Message received from namespace '{0}', entity '{1}' had no path set. Message ID: '{2}'. Parameter 2 for string: Paired namespace: Message received from namespace '{0}', entity '{1}' had no path set. Message ID: '{2}'.

Gets localized string like: Paired namespace: No messages received from namespace '{0}', entity '{1}'. Exception: '{2}'.

Parameter 0 for string: Paired namespace: No messages received from namespace '{0}', entity '{1}'. Exception: '{2}'. Parameter 1 for string: Paired namespace: No messages received from namespace '{0}', entity '{1}'. Exception: '{2}'. Parameter 2 for string: Paired namespace: No messages received from namespace '{0}', entity '{1}'. Exception: '{2}'.

Gets localized string like: Paired namespace send to backlog queue failed. Namespace '{0}', entity '{1}'. Exception: '{2}'

Parameter 0 for string: Paired namespace send to backlog queue failed. Namespace '{0}', entity '{1}'. Exception: '{2}' Parameter 1 for string: Paired namespace send to backlog queue failed. Namespace '{0}', entity '{1}'. Exception: '{2}' Parameter 2 for string: Paired namespace send to backlog queue failed. Namespace '{0}', entity '{1}'. Exception: '{2}'

Gets localized string like: Paired namespace ping caught an exception:'{0}'.

Parameter 0 for string: Paired namespace ping caught an exception:'{0}'.

Gets localized string like: Processing the backlog queue experienced an error. Exception: '{0}'

Parameter 0 for string: Processing the backlog queue experienced an error. Exception: '{0}'

Gets localized string like: TrackingId: {0}, SubsystemId: {1}, Entity: {2}. GetRuntimeEntityDescription completed. Result: {3}

Parameter 0 for string: TrackingId: {0}, SubsystemId: {1}, Entity: {2}. GetRuntimeEntityDescription completed. Result: {3} Parameter 1 for string: TrackingId: {0}, SubsystemId: {1}, Entity: {2}. GetRuntimeEntityDescription completed. Result: {3} Parameter 2 for string: TrackingId: {0}, SubsystemId: {1}, Entity: {2}. GetRuntimeEntityDescription completed. Result: {3} Parameter 3 for string: TrackingId: {0}, SubsystemId: {1}, Entity: {2}. GetRuntimeEntityDescription completed. Result: {3}

Gets localized string like: TrackingId: {0}, SubsystemId: {1}, Entity: {2}. GetRuntimeEntityDescription failed, but will continue retrying. Exception: {3}

Parameter 0 for string: TrackingId: {0}, SubsystemId: {1}, Entity: {2}. GetRuntimeEntityDescription failed, but will continue retrying. Exception: {3} Parameter 1 for string: TrackingId: {0}, SubsystemId: {1}, Entity: {2}. GetRuntimeEntityDescription failed, but will continue retrying. Exception: {3} Parameter 2 for string: TrackingId: {0}, SubsystemId: {1}, Entity: {2}. GetRuntimeEntityDescription failed, but will continue retrying. Exception: {3} Parameter 3 for string: TrackingId: {0}, SubsystemId: {1}, Entity: {2}. GetRuntimeEntityDescription failed, but will continue retrying. Exception: {3}

Gets localized string like: TrackingId: {0}, SubsystemId: {1}, Entity: {2}. GetRuntimeEntityDescription started.

Parameter 0 for string: TrackingId: {0}, SubsystemId: {1}, Entity: {2}. GetRuntimeEntityDescription started. Parameter 1 for string: TrackingId: {0}, SubsystemId: {1}, Entity: {2}. GetRuntimeEntityDescription started. Parameter 2 for string: TrackingId: {0}, SubsystemId: {1}, Entity: {2}. GetRuntimeEntityDescription started.

Gets localized string like: AmqpMessage received with destination {0}.

Parameter 0 for string: AmqpMessage received with destination {0}.

Gets localized string like: Failed to close the sender to the primary. Exception: {0}

Parameter 0 for string: Failed to close the sender to the primary. Exception: {0}

Gets localized string like: Received BrokeredMessage from secondary. Sequence Number: {0}. Secondary queue: {1}.

Parameter 0 for string: Received BrokeredMessage from secondary. Sequence Number: {0}. Secondary queue: {1}. Parameter 1 for string: Received BrokeredMessage from secondary. Sequence Number: {0}. Secondary queue: {1}.

Gets localized string like: About to send BrokeredMessage. Original Details: Sequence Number: {0}, Destination Path: {1}

Parameter 0 for string: About to send BrokeredMessage. Original Details: Sequence Number: {0}, Destination Path: {1} Parameter 1 for string: About to send BrokeredMessage. Original Details: Sequence Number: {0}, Destination Path: {1}

Gets localized string like: Failed to send BrokeredMessage. Original Details: Sequence Number: {0}, Destination Path: {1}. Exception: {2}

Parameter 0 for string: Failed to send BrokeredMessage. Original Details: Sequence Number: {0}, Destination Path: {1}. Exception: {2} Parameter 1 for string: Failed to send BrokeredMessage. Original Details: Sequence Number: {0}, Destination Path: {1}. Exception: {2} Parameter 2 for string: Failed to send BrokeredMessage. Original Details: Sequence Number: {0}, Destination Path: {1}. Exception: {2}

Gets localized string like: Success. Sent BrokeredMessage. Original Details: Sequence Number: {0}, Destination Path: {1}

Parameter 0 for string: Success. Sent BrokeredMessage. Original Details: Sequence Number: {0}, Destination Path: {1} Parameter 1 for string: Success. Sent BrokeredMessage. Original Details: Sequence Number: {0}, Destination Path: {1}

Gets localized string like: Exception occurred while creating performance counters. Exception message '{0}'.

Parameter 0 for string: Exception occurred while creating performance counters. Exception message '{0}'.

Gets localized string like: Performance counter {0} created.

Parameter 0 for string: Performance counter {0} created.

Gets localized string like: TrackingId: {0}, SubsystemId: {1}. Exception during MessageReceivePump from User Callback: {2}.

Parameter 0 for string: TrackingId: {0}, SubsystemId: {1}. Exception during MessageReceivePump from User Callback: {2}. Parameter 1 for string: TrackingId: {0}, SubsystemId: {1}. Exception during MessageReceivePump from User Callback: {2}. Parameter 2 for string: TrackingId: {0}, SubsystemId: {1}. Exception during MessageReceivePump from User Callback: {2}.

Gets localized string like: TrackingId: {0}, SubsystemId: {1}. MessageReceivePump failed to Complete: {2}.

Parameter 0 for string: TrackingId: {0}, SubsystemId: {1}. MessageReceivePump failed to Complete: {2}. Parameter 1 for string: TrackingId: {0}, SubsystemId: {1}. MessageReceivePump failed to Complete: {2}. Parameter 2 for string: TrackingId: {0}, SubsystemId: {1}. MessageReceivePump failed to Complete: {2}.

Gets localized string like: TrackingId: {0}, SubsystemId: {1}. MessageReceivePump failed to Abandon: {2}.

Parameter 0 for string: TrackingId: {0}, SubsystemId: {1}. MessageReceivePump failed to Abandon: {2}. Parameter 1 for string: TrackingId: {0}, SubsystemId: {1}. MessageReceivePump failed to Abandon: {2}. Parameter 2 for string: TrackingId: {0}, SubsystemId: {1}. MessageReceivePump failed to Abandon: {2}.

Gets localized string like: TrackingId: {0}, SubsystemId: {1}. MessageReceivePump unexpected exception: {2}.

Parameter 0 for string: TrackingId: {0}, SubsystemId: {1}. MessageReceivePump unexpected exception: {2}. Parameter 1 for string: TrackingId: {0}, SubsystemId: {1}. MessageReceivePump unexpected exception: {2}. Parameter 2 for string: TrackingId: {0}, SubsystemId: {1}. MessageReceivePump unexpected exception: {2}.

Gets localized string like: TrackingId: {0}, SubsystemId: {1}. MessageReceivePump Receive exception: {2}.

Parameter 0 for string: TrackingId: {0}, SubsystemId: {1}. MessageReceivePump Receive exception: {2}. Parameter 1 for string: TrackingId: {0}, SubsystemId: {1}. MessageReceivePump Receive exception: {2}. Parameter 2 for string: TrackingId: {0}, SubsystemId: {1}. MessageReceivePump Receive exception: {2}.

Gets localized string like: TrackingId: {0}, SubsystemId: {1}. MessageReceivePump stopped.

Parameter 0 for string: TrackingId: {0}, SubsystemId: {1}. MessageReceivePump stopped. Parameter 1 for string: TrackingId: {0}, SubsystemId: {1}. MessageReceivePump stopped.

Gets localized string like: TrackingId: {0}, SubsystemId: {1}, Backoff: {2} ms, Exception: {3}.

Parameter 0 for string: TrackingId: {0}, SubsystemId: {1}, Backoff: {2} ms, Exception: {3}. Parameter 1 for string: TrackingId: {0}, SubsystemId: {1}, Backoff: {2} ms, Exception: {3}. Parameter 2 for string: TrackingId: {0}, SubsystemId: {1}, Backoff: {2} ms, Exception: {3}. Parameter 3 for string: TrackingId: {0}, SubsystemId: {1}, Backoff: {2} ms, Exception: {3}.

Gets localized string like: Syphon ID {0}. Starting syphon for Primary: {1}, Secondary {2}, Backlog queue count {3}.

Parameter 0 for string: Syphon ID {0}. Starting syphon for Primary: {1}, Secondary {2}, Backlog queue count {3}. Parameter 1 for string: Syphon ID {0}. Starting syphon for Primary: {1}, Secondary {2}, Backlog queue count {3}. Parameter 2 for string: Syphon ID {0}. Starting syphon for Primary: {1}, Secondary {2}, Backlog queue count {3}. Parameter 3 for string: Syphon ID {0}. Starting syphon for Primary: {1}, Secondary {2}, Backlog queue count {3}.

Gets localized string like: Syphon ID {0}. Stopping syphon for Primary: {1}, Secondary {2}.

Parameter 0 for string: Syphon ID {0}. Stopping syphon for Primary: {1}, Secondary {2}. Parameter 1 for string: Syphon ID {0}. Stopping syphon for Primary: {1}, Secondary {2}. Parameter 2 for string: Syphon ID {0}. Stopping syphon for Primary: {1}, Secondary {2}.

Gets localized string like: TrackingId: {0}, SubsystemId: {1}. The '{2}' message sender is canceling a message. SequenceNumber '{3}'.

Parameter 0 for string: TrackingId: {0}, SubsystemId: {1}. The '{2}' message sender is canceling a message. SequenceNumber '{3}'. Parameter 1 for string: TrackingId: {0}, SubsystemId: {1}. The '{2}' message sender is canceling a message. SequenceNumber '{3}'. Parameter 2 for string: TrackingId: {0}, SubsystemId: {1}. The '{2}' message sender is canceling a message. SequenceNumber '{3}'. Parameter 3 for string: TrackingId: {0}, SubsystemId: {1}. The '{2}' message sender is canceling a message. SequenceNumber '{3}'.

Gets localized string like: Null reference exception occurred. Error = {0}.

Parameter 0 for string: Null reference exception occurred. Error = {0}.

Gets localized string like: HybridConnection running at Endpoint {0}.

Parameter 0 for string: HybridConnection running at Endpoint {0}.

Gets localized string like: HybridConnection running at Endpoint {0} stopped.

Parameter 0 for string: HybridConnection running at Endpoint {0} stopped.

Gets localized string like: HybridConnection failed to read Persistent Endpoint Resource Description MetaData {0} {1} {2}.

Parameter 0 for string: HybridConnection failed to read Persistent Endpoint Resource Description MetaData {0} {1} {2}. Parameter 1 for string: HybridConnection failed to read Persistent Endpoint Resource Description MetaData {0} {1} {2}. Parameter 2 for string: HybridConnection failed to read Persistent Endpoint Resource Description MetaData {0} {1} {2}.

Gets localized string like: HybridConnection failed to start {0} {1} {2}.

Parameter 0 for string: HybridConnection failed to start {0} {1} {2}. Parameter 1 for string: HybridConnection failed to start {0} {1} {2}. Parameter 2 for string: HybridConnection failed to start {0} {1} {2}.

Gets localized string like: HybridConnection not allowed to serve {0} {1}.

Parameter 0 for string: HybridConnection not allowed to serve {0} {1}. Parameter 1 for string: HybridConnection not allowed to serve {0} {1}.

Gets localized string like: HybridConnection failed to stop {0} {1} {2}.

Parameter 0 for string: HybridConnection failed to stop {0} {1} {2}. Parameter 1 for string: HybridConnection failed to stop {0} {1} {2}. Parameter 2 for string: HybridConnection failed to stop {0} {1} {2}.

Gets localized string like: HybridConnection failed to parse connection string {0}.

Parameter 0 for string: HybridConnection failed to parse connection string {0}.

Gets localized string like: HybridConnectionManager Service encountered configuration file error: {0}.

Parameter 0 for string: HybridConnectionManager Service encountered configuration file error: {0}.

Gets localized string like: HybridConnectionManager Management Server error: {0}.

Parameter 0 for string: HybridConnectionManager Management Server error: {0}.

Gets localized string like: HybridConnectionManager Management Server is starting on port {0}.

Parameter 0 for string: HybridConnectionManager Management Server is starting on port {0}.

Gets localized string like: HybridConnectionManager Management Server is stopping on port {0}.

Parameter 0 for string: HybridConnectionManager Management Server is stopping on port {0}.

Gets localized string like: Unexpected scheduledNotificationId format {0}.

Parameter 0 for string: Unexpected scheduledNotificationId format {0}.

Gets localized string like: Exception occurred trying to cancel notification. ScheduledNotificationId: {0}, Exception: {1}.

Parameter 0 for string: Exception occurred trying to cancel notification. ScheduledNotificationId: {0}, Exception: {1}. Parameter 1 for string: Exception occurred trying to cancel notification. ScheduledNotificationId: {0}, Exception: {1}.

Gets localized string like: HybridConnectionClient failed to start {0} {1} {2}.

Parameter 0 for string: HybridConnectionClient failed to start {0} {1} {2}. Parameter 1 for string: HybridConnectionClient failed to start {0} {1} {2}. Parameter 2 for string: HybridConnectionClient failed to start {0} {1} {2}.

Gets localized string like: HybridConnectionClient failed to stop {0} {1} {2}.

Parameter 0 for string: HybridConnectionClient failed to stop {0} {1} {2}. Parameter 1 for string: HybridConnectionClient failed to stop {0} {1} {2}. Parameter 2 for string: HybridConnectionClient failed to stop {0} {1} {2}.

Gets localized string like: HybridConnectionClient proxy error: {0}.

Parameter 0 for string: HybridConnectionClient proxy error: {0}.

Gets localized string like: HybridConnectionClient running at Endpoint {0}.

Parameter 0 for string: HybridConnectionClient running at Endpoint {0}.

Gets localized string like: HybridConnectionClient running at Endpoint {0} stopped.

Parameter 0 for string: HybridConnectionClient running at Endpoint {0} stopped.

Gets localized string like: HybridConnectionClient Trace: {0}.

Parameter 0 for string: HybridConnectionClient Trace: {0}.

Gets localized string like: HybridConnectionClient Service encountered configuration file error: {0}.

Parameter 0 for string: HybridConnectionClient Service encountered configuration file error: {0}.

Gets localized string like: HybridConnectionManager Trace: {0}.

Parameter 0 for string: HybridConnectionManager Trace: {0}.

Gets localized string like: HybridConnectionClient Management Server error: {0}.

Parameter 0 for string: HybridConnectionClient Management Server error: {0}.

Gets localized string like: HybridConnectionClient Management Server is starting on port {0}.

Parameter 0 for string: HybridConnectionClient Management Server is starting on port {0}.

Gets localized string like: HybridConnectionClient Management Server is stopping on port {0}.

Parameter 0 for string: HybridConnectionClient Management Server is stopping on port {0}.

Gets localized string like: {0} unloaded an instance (key = {1}, value = {2}).

Parameter 0 for string: {0} unloaded an instance (key = {1}, value = {2}). Parameter 1 for string: {0} unloaded an instance (key = {1}, value = {2}). Parameter 2 for string: {0} unloaded an instance (key = {1}, value = {2}).

Gets localized string like: Quota for BufferSize {0} Increased to {1}

Parameter 0 for string: Quota for BufferSize {0} Increased to {1} Parameter 1 for string: Quota for BufferSize {0} Increased to {1}

Gets localized string like: New Bytes Array for BufferSize {0}

Parameter 0 for string: New Bytes Array for BufferSize {0}

Gets localized string like: Quota for BufferSize {0} Increased to {1} Number of Misses {2}

Parameter 0 for string: Quota for BufferSize {0} Increased to {1} Number of Misses {2} Parameter 1 for string: Quota for BufferSize {0} Increased to {1} Number of Misses {2} Parameter 2 for string: Quota for BufferSize {0} Increased to {1} Number of Misses {2}

Gets localized string like: Critical error occurred and running process exited. Error message is {0}.

Parameter 0 for string: Critical error occurred and running process exited. Error message is {0}.

Gets localized string like: Operation {0} started.

Parameter 0 for string: Operation {0} started.

Gets localized string like: Operation {0} was complete.

Parameter 0 for string: Operation {0} was complete.

Gets localized string like: Operation {0} failed with an error {1}.

Parameter 0 for string: Operation {0} failed with an error {1}. Parameter 1 for string: Operation {0} failed with an error {1}.

Gets localized string like: Operation '{0}'' failed with an error {1}.

Parameter 0 for string: Operation '{0}'' failed with an error {1}. Parameter 1 for string: Operation '{0}'' failed with an error {1}.

Gets localized string like: BrokeredMessage deserializing from store error. TrackingId: {0}, Entity: {1}, Bytes: {2}, Exception: {3}.

Parameter 0 for string: BrokeredMessage deserializing from store error. TrackingId: {0}, Entity: {1}, Bytes: {2}, Exception: {3}. Parameter 1 for string: BrokeredMessage deserializing from store error. TrackingId: {0}, Entity: {1}, Bytes: {2}, Exception: {3}. Parameter 2 for string: BrokeredMessage deserializing from store error. TrackingId: {0}, Entity: {1}, Bytes: {2}, Exception: {3}. Parameter 3 for string: BrokeredMessage deserializing from store error. TrackingId: {0}, Entity: {1}, Bytes: {2}, Exception: {3}.

Gets localized string like: Event IDs must be greater than zero.

Gets localized string like: Opcode values less than 10 are reserved for system use.

Gets localized string like: Listener not found.

Gets localized string like: Channel {0} used in event {1} is undefined.

Parameter 0 for string: Channel {0} used in event {1} is undefined. Parameter 1 for string: Channel {0} used in event {1} is undefined.

Gets localized string like: Maximum number of arguments '{0}' exceeded.

Parameter 0 for string: Maximum number of arguments '{0}' exceeded.

Gets localized string like: Maximum number of string arguments '{0}' exceeded.

Parameter 0 for string: Maximum number of string arguments '{0}' exceeded.

Gets localized string like: EventSource derived class {0} should specify Guid attribute for the ETW provider guid.

Parameter 0 for string: EventSource derived class {0} should specify Guid attribute for the ETW provider guid.

Gets localized string like: Event attribute placed on method {0} which does not return 'void'.

Parameter 0 for string: Event attribute placed on method {0} which does not return 'void'.

Gets localized string like: Failed with error code 0x{0:x}.

Parameter 0 for string: Failed with error code 0x{0:x}.

Gets localized string like: Error: event {0} is given event ID {1} but {2} was passed to the helper.

Parameter 0 for string: Error: event {0} is given event ID {1} but {2} was passed to the helper. Parameter 1 for string: Error: event {0} is given event ID {1} but {2} was passed to the helper. Parameter 2 for string: Error: event {0} is given event ID {1} but {2} was passed to the helper.

Gets localized string like: The type of {0} is not expected in {1}.

Parameter 0 for string: The type of {0} is not expected in {1}. Parameter 1 for string: The type of {0} is not expected in {1}.

Gets localized string like: Value 0x{0:x} for keyword {1} needs to be a power of 2.

Parameter 0 for string: Value 0x{0:x} for keyword {1} needs to be a power of 2. Parameter 1 for string: Value 0x{0:x} for keyword {1} needs to be a power of 2.

Gets localized string like: Multiple events sources with the guid {0} have been created in the appdomain.

Parameter 0 for string: Multiple events sources with the guid {0} have been created in the appdomain.

Gets localized string like: Use of undefined keyword value 0x{0:x} for event {1}.

Parameter 0 for string: Use of undefined keyword value 0x{0:x} for event {1}. Parameter 1 for string: Use of undefined keyword value 0x{0:x} for event {1}.

Gets localized string like: Unsupported type: {0}.

Parameter 0 for string: Unsupported type: {0}.

Gets localized string like: Event {0} has ID {1} which is the same as a previously defined event.

Parameter 0 for string: Event {0} has ID {1} which is the same as a previously defined event. Parameter 1 for string: Event {0} has ID {1} which is the same as a previously defined event.

Gets localized string like: Event name {0} used more than once. If you want to overload a method, the overloaded method should have a [Event(-1)] attribute to indicate the method should not have associated meta-data.

Parameter 0 for string: Event name {0} used more than once. If you want to overload a method, the overloaded method should have a [Event(-1)] attribute to indicate the method should not have associated meta-data.

Ensures the given string ends with the requested pattern. If it does no allocations are performed.

Ensures the given string starts with the requested pattern. If it does no allocations are performed.

Ensures that a string is no longer than the specified length.

EventSource for the new Dynamic EventSource type of Microsoft-Azure-ServiceBus traces. The default Level is Informational When defining Start/Stop tasks, the StopEvent.Id must be exactly StartEvent.Id + 1. Do not explicity include the Guid here, since EventSource has a mechanism to automatically map to an EventSource Guid based on the Name (Microsoft-Azure-ServiceBus). The Guid will be {853e0474-d044-58cd-5623-4b4ad2abfba9} as long as the name stays Microsoft-Azure-ServiceBus

Describes the WCF endpoint behavior that is used to specify the Service Bus credentials for a particular endpoint.

Initializes a new instance of the class.

Initializes a new instance of the class.

The token provider used as a binding parameter.

Gets or sets the token provider that is used as a binding parameter.

The token provider used as a binding parameter.

Gets or sets a unique indentifier which can be used to for correlating the listener instance at the cloud service.

Adds this TransportClientEndpointBehavior to the bindingParameters collection.

The endpoint to modify. The objects that binding elements require to support the behavior.

This implementation does nothing.

The endpoint that is to be customized. The client runtime to be customized.

This implementation does nothing.

The endpoint that is to be customized. The endpoint dispatcher to be modified or extended.

This method does nothing.

The endpoint this behavior applies to.

Helper class for creating a Message object from streaming content.

Creates a message from a stream, using the specified version, action, and delegate.

Returns a stream-created. Specifies the addressing and envelope versions to use for the newly created message. If the request is made using REST, the Addressing and Envelope version are None. A description of how the message should be processed. For messages sent in response to a HTTP request, this value must be “GETRESPONSE”. A delegate that allows to call back and ask for a Stream to populate the body of the message.

Creates a message, using the specified version, action, and stream.

Returns a stream-created. Specifies the addressing and envelope versions to use for the newly created message. If the request is made using REST, the Addressing and Envelope version are None. A description of how the message should be processed. For messages sent in response to a HTTP request, this value must be “GETRESPONSE”. A stream that contains content used to write the body of the new message.

Creates a JSON message with a specified version.

The created JSON message. The message version. A description of how the message should be processed. A stream that contains content used to write the body of the new message.

Retrieves the stream of the specified message.

Returns a that contains the stream of the message. A Stream is always returned regardless of whether the message body is empty. The message.

Retrieves the stream of the specified message with the specified reader.

The stream of the specified message. The reader.

This delegate is used by StreamMessageHelper to write the body of streamed messages.

The stream to write the message body to.

Represents an anchor class used in managing entities, such as queues, topics, subscriptions, and rules, in your service namespace. You must provide service namespace address and access credentials in order to manage your service namespace.

NamespaceManagerSettings nsSettings = new NamespaceManagerSettings(); // with credentials and operation timeout NamespaceManager manager = new NamespaceManager(new Uri("baseUri"), nsSettings);

Specifies the string of the format "YYYY-MM" that indicates the client protocol version.

Initializes a new instance of the class with the given service namespace address.

The full address of the service namespace.

Initializes a new instance of the class with the given addresses.

The full addresses of the service namespace.

Initializes a new instance of the class with the given service namespace URI base address.

The full URI address of the service namespace.

Initializes a new instance of the class with the given service namespace URI base addresses.

The full URI addresses of the service namespace.

Initializes a new instance of the class with the given service namespace base address and token provider.

The full address of the service namespace. The security token provider. contains a path appended to the full address of the service namespace. or is null. Even though it is not allowed to include paths in the namespace address, you can specify a credential that authorizes you to perform actions only on some sublevels off of the base address.

Initializes a new instance of the class with the given addresses and token provider.

The full addresses of the service namespace. The security token provider. Even though it is not allowed to include paths in the namespace addresses, you can specify a credential that authorizes you to perform actions only on some sublevels off of the base addresses.

Initializes a new instance of the class with the given service namespace URI base address and object.

The full URI address of the service namespace. The security token provider object. contains a path appended to the full address of the service namespace. or is null. Even though it is not allowed to include paths in the namespace address, you can specify a credential that authorizes you to perform actions only on some sublevels off of the base address, i.e. it is not a must that the credentials you specify be to the base adress itself.

Initializes a new instance of the class with the given service namespace URI base addresses and token provider.

The full URI addresses of the service namespace. The security token provider. Even though it is not allowed to include paths in the namespace addresses, you can specify a credential that authorizes you to perform actions only on some sublevels off of the base addresses, i.e. it is not a must that the credentials you specify be to the base adresses itself.

Initializes a new instance of the class with the given service namespace base address and object.

The full address of the service namespace. A object, which contains the and properties. contains a path appended to the full address of the service namespace. or is null. Even though it is not allowed to include paths in the namespace address, you can specify a credential that authorizes you to perform actions only on some sublevels off of the base address, i.e. it is not a must that the credentials you specify be to the base adress itself.

Initializes a new instance of the class with the given addresses and settings.

The full addresses of the service namespace. A object, which contains the and properties. Even though it is not allowed to include paths in the namespace address, you can specify a credential that authorizes you to perform actions only on some sublevels off of the base addresses, i.e. it is not a must that the credentials you specify be to the base adresses itself.

Initializes a new instance of the class with the given service namespace URI base address and object.

The full URI address of the service namespace. A object, which contains the and properties. contains a path appended to the full address of the service namespace. or is null. Even though it is not allowed to include paths in the namespace address, you can specify a credential that authorizes you to perform actions only on some sublevels off of the base address, i.e. it is not a must that the credentials you specify be to the base adress itself.

Initializes a new instance of the class with the given service namespace URI base addresses and settings.

The full URI addresses of the service namespace. A object, which contains the and properties. Even though it is not allowed to include paths in the namespace addresses, you can specify a credential that authorizes you to perform actions only on some sublevels off of the base addresses, i.e. it is not a must that the credentials you specify be to the base adresses itself.

Gets the service namespace base address.

A that represents the service namespace base address.

Gets the service namespace client settings.

A object that represents the service namespace client settings.

Creates a new instance of .

A new instance of .

Creates a new instance of using a specified connection string.

The connection sting used. A new instance of .

Retrieves a string of the format "YYYY-MM" that indicates the maximum supported protocol version that the server or service can handle.

A string that indicates the maximum supported protocol version that the server or service can handle.

Asynchronously retrieves a string of the format "YYYY-MM" that indicates the maximum supported protocol version that the server or service can handle.

The asynchronous operation.

Creates a new queue in the service namespace with the given path.

The path of the queue relative to the service namespace base address. The of the newly created queue. is null or empty. The length of is greater than 290 characters. The operation times out. The timeout period is initialized through the class. You may need to increase the value of the property to avoid this exception if the timeout value is relatively low. A queue or a topic with the same name and path exists under the same service namespace. The object does not have sufficient permission to perform this operation. You should check to ensure that your has the correct credentials to perform this operation. Either the specified size in the description is not supported or the maximum allowable quota has been reached. You must specify one of the supported size values, delete existing entities, or increase your quota size. An internal error or unexpected exception occurs. The server is overloaded with logical operations. You can consider any of the following actions:Wait and retry calling this function.Remove entities before retry (for example, receive messages before sending any more).

Asynchronously creates a new queue in the service namespace with the given path.

The path of the queue relative to the service namespace base address. The of the newly created queue.

Asynchronously creates a new queue in the service namespace with the specified queue description.

A object describing the attributes with which the new queue will be created. The of the newly created queue.

Creates a new queue in the service namespace with the specified queue description.

A object describing the attributes with which the new queue will be created. The of the newly created queue.

Creates a new relay in the service namespace with the given path and type.

The path of the queue relative to the service namespace base address. The relay type. The object for the newly created relay.

Creates a new relay in the service namespace with the specified relay description.

The description object describing the attributes with which the new relay will be created. The object for the newly created relay.

Asynchronously creates a new relay in the service namespace with the given path and type.

The path of the queue relative to the service namespace base address. The relay type. The object for the newly created relay.

Asynchronously creates a new relay in the service namespace with the specified relay description.

The description object describing the attributes with which the new relay will be created. The object for the newly created relay.

Deletes the relay described by the path relative to the service namespace base address.

The path of the relay relative to the service namespace base address.

Asynchronously deletes the relay described by the path relative to the service namespace base address.

The path of the relay relative to the service namespace base address. The asynchronous delete relay operation.

Retrieves the details of a given relay endpoint.

The relay path.

Asynchronously retrieves the details of a given relay endpoint.

The relay path. The asynchronous operation.

Retrieves a collection of all relays in the service namespace.

Asynchronously retrieves a collection of all relays in the service namespace.

The asynchronous operation.

Determines whether a relay exists in the service namespace.

The path of the relay relative to the service namespace base address.

Asynchronously determines whether a relay exists in the service namespace.

The path of the relay relative to the service namespace base address. The asynchronous operation.

Upddates a relay endpoint.

A object describing the updated relay.

Asynchronously upddates a relay endpoint.

A object describing the updated relay. The asynchronous operation.

Creates a new Event Hub using default values, for the given input path.

The path to the Event Hub. Returns the .

Creates a new Event Hub using the specified .

The . Returns the .

Asynchronously creates an event hub.

The path to the Event Hub. The task that completes the asynchronous operation.

Asynchronously creates an event hub.

An object that describes the Event Hub to create. The task that completes the asynchronous operation.

Creates an Event Hub if it does not exist.

The path to the Event Hub. Returns an object.

Creates an Event Hub if it does not exist.

An object that describes the Event Hub to create. Returns an object.

Asynchronously creates an Event Hub if it does not exist.

The path of the event hub. The task that completes the asynchronous operation.

Asynchronously creates an Event Hub if it does not exist.

The event hub description. The task that completes the asynchronous operation.

Updates an Event Hub.

An object containing the updated information. Returns .

Asynchronously updates the event hub.

The event hub description. The task representing the asynchronous operation.

Deletes an Event Hub.

The path to the Event Hub.

Asynchronously deletes an Event Hub.

The path to the Event Hub. The task that represents the asynchronous operation.

Gets information about an Event Hub.

The path to the Event Hub. Returns an object that contains the Event Hub description.

Asynchronously gets information about an Event Hub.

The path to the Event Hub. The task representing the asynchronous operation.

Indicates whether or not an Event Hub exists.

The path to the Event Hub. Returns true if the Event Hub exists; otherwise, false.

Asynchronously determines whether the event hub exists from the service namespace.

The path of the event hub. The task representing the asynchronous operation.

Gets a collection representing a set of Event Hubs.

Returns an object representing the set of Event Hubs.

Asynchronously gets a list of Event Hubs.

The task representing the asynchronous operation.

Returns all revoked publishers in an Event Hub.

Path to the Event Hub. See . Returns an collection containing the revoked publishers.

Asynchronous version of .

Path to the Event Hub. See . Returns a containing the revoked publishers.

Adds the publisher to the Event Hubs revocation list.

Event Hub path under which the publisher must be revoked. See . The publisher to revoke. Returns .

Asynchronous version of .

Event Hub path under which the publisher must be revoked. See . The publisher to revoke. Returns .

Removes the publisher from the Event Hubs revocation list.

Event Hub path under which the publisher was revoked and must be restored. See . The revoked publisher.

Asynchronous version of .

Event Hub path under which the publisher was revoked and must be restored. See . The revoked publisher. Returns .

Enables you to update the queue.

A object describing the queue to be updated. The of the updated queue.

Asynchronously enables you to update the queue.

A object describing the queue to be updated. The asynchronous operation.

Renames a queue inside a namespace.

The path to an existing queue. The new path to the renamed queue. Returns . Thrown when is null or empty. Thrown when the length of is more than 290 characters. Thrown when the operation times out. The timeout period is initialized through the class. You can increase the value of the property to avoid this exception if the timeout value is relatively low. Thrown when the source queue with the specified path does not exist. Thrown when the target queue with the same path exists within the same namespace. Thrown when the client does not have credentials to perform the operation. Thrown when an internal error or unexpected exception occurs.

Asynchronous version of .

The path to an existing queue. The new path to the renamed queue. Returns . Thrown when is null or empty. Thrown when the length of is more than 290 characters. Thrown when the operation times out. The timeout period is initialized through the class. You can increase the value of the property to avoid this exception if the timeout value is relatively low. Thrown when the source queue with the specified path does not exist. Thrown when the target queue with the same path exists within the same namespace. Thrown when the client does not have credentials to perform the operation. Thrown when an internal error or unexpected exception occurs.

Deletes the queue described by the path relative to the service namespace base address.

The path of the queue relative to the service namespace base address. is empty or null, or starts or ends with "/". The length of is greater than . The operation times out. The timeout period is initialized through the class. You may need to increase the value of the property to avoid this exception if the timeout value is relatively low. Queue does not exist under this path. The object does not have sufficient permission to perform this operation. You should check to ensure that your has the correct credentials to perform this operation. An internal error or unexpected exception occurs.

Asynchronously deletes the queue described by the path relative to the service namespace base address.

The path of the queue relative to the service namespace base address. The asynchronous delete queue operation.

Retrieves a queue from the service namespace.

The path of the queue relative to the service namespace base address. A handle to the queue, or a exception if the queue does not exist in the service namespace. is empty or null, or starts or ends with "/". The operation times out. The timeout period is initialized through the class. You may need to increase the value of the property to avoid this exception if the timeout value is relatively low. The object does not have sufficient permission to perform this operation. You should check to ensure that your has the correct credentials to perform this operation. The queue does not exist in the service namespace. An internal error or unexpected exception occurs.

Asynchronously retrieves a queue from the service namespace.

The path of the queue relative to the service namespace base address. The asynchronous operation.

Determines whether a queue exists in the service namespace.

The path of the queue relative to the service namespace base address. true if a queue exists in the service namespace; otherwise, false.

Asynchronously determines whether a queue exists in the service namespace.

The path of the queue relative to the service namespace base address. The asynchronous operation.

Retrieves an enumerable collection of all queues in the service namespace.

An object that represents the collection of all queues in the service namespace or returns an empty collection if no queue exists. The operation times out. The timeout period is initialized through the class. You may need to increase the value of the property to avoid this exception if the timeout value is relatively low. The object does not have sufficient permission to perform this operation. You should check to ensure that your has the correct credentials to perform this operation. An internal error or unexpected exception occurs.

Retrieves an enumerable collection of all queues in the service namespace with the specified filter. You can filter by a combination of entity name (including starts with), entity length (Gt or Lt), created, updated, and accessed time (Gt or Lt).

A string used to filter the queues to be retrieved. An object that represents the collection of all queues in the service namespace or returns an empty collection if no queue exists. Filter expression formats: {Propery} {Logical Operator} {Value} AND {Filter expression} {Function} {Logical Operator} {Value} AND {Filter expression} ----------------------------------------------------------------------------------------- Available properties: Path | ModifiedAt | AccessedAt | CreatedAt | MessageCount Logical operators: Eq | Ne | Gt | Ge | Lt | Le Value: A value of the corresponding property type Functions: startswith({Propery}, {Value}) var queuesWithMessages = namespaceManager.GetQueues("messageCount Gt 0"); var queuesStartsWith = namespaceManager.GetQueues($"startswith(path, 'queue') eq true");

Asynchronously retrieves an enumerable collection of all queues in the service namespace.

The asynchronous operation.

Asynchronously retrieves an enumerable collection of all queues in the service namespace with specified filter.

The string used to filter the queues to be retrieved. The asynchronous operation. Filter expression formats: {Propery} {Logical Operator} {Value} AND {Filter expression} {Function} {Logical Operator} {Value} AND {Filter expression} ----------------------------------------------------------------------------------------- Available properties: Path | ModifiedAt | AccessedAt | CreatedAt | MessageCount Logical operators: Eq | Ne | Gt | Ge | Lt | Le Value: A value of the corresponding property type Functions: startswith({Propery}, {Value}) var queuesWithMessages = await namespaceManager.GetQueuesAsync("messageCount Gt 0"); var queuesStartsWith = await namespaceManager.GetQueuesAsync($"startswith(path, 'queue') eq true");

Creates a new topic inside the service namespace with the given service namespace path.

The path of the topic relative to the service namespace base address. The of the newly created topic. is null or empty, or begins or ends with “/”. Length of is greater than . The operation times out. The timeout period is initialized through the class. You may need to increase the value of the property to avoid this exception if the timeout value is relatively low. A queue or a topic with the same name and path exists under the same service namespace. The object does not have sufficient permission to perform this operation. You should check to ensure that your has the correct credentials to perform this operation. Either the specified size in the description is not supported or the maximum allowable quota has been reached. You must specify one of the supported size values, delete existing entities, or increase your quota size. An internal error or unexpected exception occurs.

Creates a new topic inside the service namespace with the specified topic description.

A object describing the attributes with which the new topic will be created. The of the newly created topic.

Asynchronously creates a new topic inside the service namespace with the given service namespace path.

The path of the topic relative to the service namespace base address. The asynchronous operation.

Asynchronously creates a new topic inside the service namespace with the specified topic description.

A object describing the attributes with which the new topic will be created. The asynchronous operation.

Enables you to update the topic.

A object describing the topic to be updated. The of the updated topic.

Asynchronously enables you to update the topic.

A object describing the topic to be updated. The asynchronous operation.

Renames a topic inside a namespace.

The path to an existing topic. The new path to the renamed topic. Returns . Thrown when is null or empty. Thrown when the length of is more than 290 characters. Thrown when the operation times out. The timeout period is initialized through the class. You can increase the value of the property to avoid this exception if the timeout value is relatively low. Thrown when the source topic with the specified path does not exist. Thrown when the target topic with the same path exists within the same namespace. Thrown when the client does not have credentials to perform the operation. Thrown when an internal error or unexpected exception occurs.

Asynchronous version of .

The path to an existing topic. The new path to the renamed topic. Returns . Thrown when is null or empty. Thrown when the length of is more than 290 characters. Thrown when the operation times out. The timeout period is initialized through the class. You can increase the value of the property to avoid this exception if the timeout value is relatively low. Thrown when the source topic with the specified path does not exist. Thrown when the target topic with the same path exists within the same namespace. Thrown when the client does not have credentials to perform the operation. Thrown when an internal error or unexpected exception occurs.

Deletes the topic described by path relative to the service namespace base address.

The path of the topic relative to the service namespace base address. is null or empty, or starts or ends with "/".

Asynchronously deletes the topic described by path relative to the service namespace base address.

The path of the topic relative to the service namespace base address. The asynchronous deleted topic operation.

Retrieves the topic from the service namespace.

The path of the topic relative to the service namespace base address. A reference to the topic, or a exception if the topic does not exist in the service namespace. is empty or null. The operation times out. The timeout period is initialized through the class. You may need to increase the value of the property to avoid this exception if the timeout value is relatively low. The object does not have sufficient permission to perform this operation. You should check to ensure that your has the correct credentials to perform this operation. The topic does not exist in the service namespace. An internal error or unexpected exception occurs.

Asynchronously retrieves the topic from the service namespace.

The path of the topic relative to the service namespace base address. The asynchronous operation.

Determines whether a topic exists in the service namespace.

The path of the topic relative to the service namespace base address. true if a topic exists in the service namespace; otherwise, false.

Asynchronously determines whether a topic exists in the service namespace.

The path of the topic relative to the service namespace base address. The asynchronous operation.

Retrieves a collection of topics in a service namespace.

An object that represents the collection of topics under the current namespace, or returns an empty collection if no topic exists. The operation times out. The timeout period is initialized through the class. You may need to increase the value of the property to avoid this exception if the timeout value is relatively low. The object does not have sufficient permission to perform this operation. You should check to ensure that your has the correct credentials to perform this operation. An internal error or unexpected exception occurs.

Retrieves a collection of topics in a service namespace with the specified filter. You can filter by a combination of entity name (including starts with), entity length (Gt or Lt), created, updated, and accessed time (Gt or Lt).

The string used to filter the topics to be retrieved. An object that represents the collection of topics under the current namespace, or returns an empty collection if no topic exists. Filter expression formats: {Propery} {Logical Operator} {Value} AND {Filter expression} {Function} {Logical Operator} {Value} AND {Filter expression} ----------------------------------------------------------------------------------------- Available properties: Path | ModifiedAt | AccessedAt | CreatedAt | MessageCount Logical operators: Eq | Ne | Gt | Ge | Lt | Le Value: A value of the corresponding property type Functions: startswith({Propery}, {Value}) var topicsWithMessages = namespaceManager.GetTopics("messageCount Gt 0"); var topicsStartsWith = namespaceManager.GetTopics($"startswith(path, 'topic') eq true");

Asynchronously retrieves a collection of topics in a service namespace.

The asynchronous operation.

Asynchronously retrieves a collection of topics in a service namespace.

The string used to filter the topics to be retrieved. The asynchronous operation. Filter expression formats: {Propery} {Logical Operator} {Value} AND {Filter expression} {Function} {Logical Operator} {Value} AND {Filter expression} ----------------------------------------------------------------------------------------- Available properties: Path | ModifiedAt | AccessedAt | CreatedAt | MessageCount Logical operators: Eq | Ne | Gt | Ge | Lt | Le Value: A value of the corresponding property type Functions: startswith({Propery}, {Value}) var topicsWithMessages = await namespaceManager.GetTopicsAsync("messageCount Gt 0"); var topicsStartsWith = await namespaceManager.GetTopicsAsync($"startswith(path, 'topic') eq true");

Creates an Event Hubs consumer group using default values, with the specified Event Hubs path and a name for the consumer group.

The path to the Event Hub. The name of the consumer group. Returns .

Creates an Event Hubs consumer group using the specified .

The . Returns .

Asynchronous version of .

The path to the Event Hub. The name of the consumer group. The task that completes the asynchronous operation.

Asynchronous version of .

The . The task that completes the asynchronous operation.

Creates a consumer group if it does not already exist, using the specified Event Hubs path and group name. If the group already exists, then return the stored .

Path to the Event Hub. The name of the consumer group to create. Returns the newly-created . If the consumer group already exists, returns the existing .

Creates a consumer group if it does not already exist, using the specified as metadata. If the group already exists, then return the stored .

A object. Returns the newly-created . If the consumer group already exists, returns the existing .

Asynchronous version of .

The path to the Event Hub. The name of the consumer group. The task that completes the asynchronous operation.

Asynchronous version of .

The consumer group description. The task that completes the asynchronous operation.

Deletes a consumer group.

The path to the Event Hub. The name of the consumer group to delete.

Asynchronously deletes a consumer group.

The path to the Event Hub. The name of the consumer group to delete. The task that represents the asynchronous operation.

Gets an Event Hubs consumer group.

The path to the Event Hub. The name of the consumer group. Returns .

Asynchronously gets a consumer group.

The path to the Event Hub. The name of the consumer group. The task representing the asynchronous operation.

Gets a collection representing a set of consumer groups.

The path to the Event Hub. Returns an object representing the set of consumer groups.

Asynchronously gets a set of consumer groups.

The path to the Event Hub. The task representing the asynchronous operation.

Updates an Event Hubs consumer group.

A object containing the updated information. Returns .

Asynchronously updates the consumer group.

The consumer group description. The task representing the asynchronous operation.

Creates a new subscription in the service namespace with the specified topic path and subscription name.

The topic path relative to the service namespace base address. The name of the subscription. The of the newly created subscription. Be default, A "pass-through" filter is created for this subscription, which means it will allow all message to go to this subscription. The name of the filter is .

Creates a new subscription in the service namespace with the specified topic path, subscription name, and filter expression.

The topic path relative to the service namespace base address. The name of the subscription. The filter expression used to capture messages satisfying the filtering expression value. The of the newly created subscription. A default rule will be created using data from and named as .

Creates a new subscription in the service namespace with the specified subscription description.

A object describing the attributes with which the new subscription will be created. The of the newly created subscription. Be default, A "pass-through" filter is created for this subscription, which means it will allow all message to go to this subscription. The name of the filter is .

Creates a new subscription in the service namespace with the specified subscription description and filter expression.

A object describing the attributes with which the new subscription will be created. The filter expression used to capture messages satisfying the filtering expression value. The of the newly created subscription. A default rule will be created using data from and named as .

Creates a new subscription in the service namespace with the specified topic path, subscription name, and rule description.

The topic path relative to the service namespace base address. The name of the subscription. A object describing the attributes with which the messages are matched and acted upon. The of the newly created subscription. A default rule will be created using data from . If is null or white space, then the name of the rule created will be .

Creates a new subscription in the service namespace with the specified subscription description and rule description.

A object describing the attributes with which the new subscription will be created. A object describing the attributes with which the messages are matched and acted upon. The of the newly created subscription. A default rule will be created using data from . If is null or white space, then the name of the rule created will be .

Asynchronously creates a new subscription in the service namespace with the specified topic path and subscription name.

The topic path relative to the service namespace base address. The name of the subscription. The asynchronously created subscription.

Asynchronously creates a new subscription in the service namespace with the specified topic path, subscription name, and filter expression.

The topic path relative to the service namespace base address. The name of the subscription. The filter expression used to capture messages satisfying the filtering expression value. The asynchronously created subscription.

Asynchronously creates a new subscription in the service namespace with the specified topic path, subscription name, and rule description.

The topic path relative to the service namespace base address. The name of the subscription. A object describing the attributes with which the messages are matched and acted upon. The asynchronously created subscription.

Asynchronously creates a new subscription in the service namespace with the specified subscription description.

A object describing the attributes with which the new subscription will be created. The asynchronously created subscription.

Asynchronously creates a new subscription in the service namespace with the specified subscription description and filter expression.

A object describing the attributes with which the new subscription will be created. The filter expression used to capture messages satisfying the filtering expression value. The asynchronously created subscription.

Asynchronously creates a new subscription in the service namespace with the specified subscription description and rule description.

A object describing the attributes with which the new subscription will be created. A object describing the attributes with which the messages are matched and acted upon. The asynchronously created subscription.

Enables you to update the subscription.

A object describing the subscription to be updated. The of the updated subscription.

Asynchronously enables you to update the subscription.

A object describing the subscription to be updated. The asynchronous operation.

Deletes the subscription with the specified topic path and subscription name.

The topic path relative to the service namespace base address. The name of the subscription to delete.

Asynchronously deletes the subscription with the specified topic path and subscription name.

The topic path relative to the service namespace base address. The name of the subscription to delete. The asynchronous delete subscription operation.

Retrieves the topic from the service namespace.

The path of the topic relative to the service namespace base address. The name of the subscription. A handle to the subscription, or a exception if the subscription does not exist in the service namespace. The subscription does not exist in the service namespace.

Asynchronously retrieves the topic from the service namespace.

The path of the topic relative to the service namespace base address. The name of the subscription. The asynchronous operation.

Determines whether a subscription exists in the service namespace.

The path of the topic relative to the service namespace base address. The name of the subscription. true if a subscription exists in the service namespace; otherwise, false.

Asynchronously determines whether a subscription exists in the service namespace.

The path of the topic relative to the service namespace base address. The name of the subscription. The asynchronous operation.

Retrieves an enumerable collection of all subscriptions in the service namespace.

The path of the topic relative to the service namespace base address. An object that represents the collection of all subscriptions in the service namespace or returns an empty collection if no subscription exists.

Asynchronously retrieves an enumerable collection of all subscriptions in the service namespace.

The path of the topic relative to the service namespace base address. The asynchronous operation.

Retrieves an enumerable collection of all subscriptions in the service namespace with specified topic path and filter.

The path of the topic relative to the service namespace base address. The string used to filter the subscriptions to be retrieved. An object that represents the collection of all subscriptions in the service namespace or returns an empty collection if no subscription exists. Filter expression formats: {Propery} {Logical Operator} {Value} AND {Filter expression} {Function} {Logical Operator} {Value} AND {Filter expression} ----------------------------------------------------------------------------------------- Available properties: ModifiedAt | AccessedAt | CreatedAt | MessageCount Logical operators: Eq | Ne | Gt | Ge | Lt | Le Value: A value of the corresponding property type Functions: startswith({Propery}, {Value}) var subscriptionsWithMessages = namespaceManager.GetSubscriptions("topicName", "messageCount Gt 0"); var subscriptionsStartsWith = namespaceManager.GetSubscriptions("topicName", $"startswith(path, 'subscription') eq true");

Asynchronously retrieves an enumerable collection of all subscriptions in the service namespace.

The path of the topic relative to the service namespace base address. The string used to filter the subscriptions to be retrieved. The asynchronous operation. Filter expression formats: {Propery} {Logical Operator} {Value} AND {Filter expression} {Function} {Logical Operator} {Value} AND {Filter expression} ----------------------------------------------------------------------------------------- Available properties: ModifiedAt | AccessedAt | CreatedAt | MessageCount Logical operators: Eq | Ne | Gt | Ge | Lt | Le Value: A value of the corresponding property type Functions: startswith({Propery}, {Value}) var subscriptionsWithMessages = await namespaceManager.GetSubscriptionsAsync("topicName", "messageCount Gt 0"); var subscriptionsStartsWith = await namespaceManager.GetSubscriptionsAsync("topicName", $"startswith(path, 'subscription') eq true");

Get partitions.

EventHub path to find the partitions in them. A collection of partitions for the EventHub path.

Get partitions.

EventHub path to find the partitions in them. A collection of partitions for the EventHub path.

Get partitions.

EventHub path to find the partitions in them. A collection of partitions for the EventHub path.

Get partitions.

EventHub path to find the partitions in them. A collection of partitions for the EventHub path.

Returns information about the specified Event Hub partition. This method assumes that you want partition information for the partition specified by the parameter that belongs to the default consumer group pointed to by .

The path to the Event Hub. The ID of the Event Hub partition. Returns .

Asynchronous version of .

The path to the Event Hub. The ID of the Event Hub partition. Returns .

Asynchronous version of .

The path to the Event Hub. The name of the Event Hubs consumer group. The ID of the Event Hubs partition. Returns .

Begins a get partition.

EventHub path to find the partition. name of the Partiton id An delegate that references the method to invoke when the operation is complete. A user-defined object that contains information about the receive operation. This object is passed to the GetPartition delegate when the operation is complete. An that references the asynchronous GetPartition .

Ends a get partition.

An that references the GetPartition. Partition discription after end get partition.

Retrieves an enumerable collection of all rules in the service namespace.

The path of the topic relative to the service namespace base address. The name of the subscription. An object that represents the collection of all rules in the service namespace or returns an empty collection if no rule exists.

Retrieves an enumerable collection of all rules in the service namespace with specified topic path, subscription name and filter.

The topic path relative to the service namespace base address. The name of the subscription. The string used to filter the rules to be retrieved. An object that represents the collection of all rules in the service namespace or returns an empty collection if no rule exists. Filter expression format: {Propery} {Logical Operator} {Value} {Filter expression} ----------------------------------------------------------------------------------------- Available properties: ModifiedAt | AccessedAt | CreatedAt Logical operators: Eq | Ne | Gt | Ge | Lt | Le Value: A value of the corresponding property type var fiveMinutesAgo = DateTime.UtcNow.AddMinutes(-5).ToString("M/dd/yyyy hh:mm:ss"); var rulesInTheLast5Minutes = namespaceManager.GetRules(topicName, subscriptionName, $"createdAt gt '{fiveMinutesAgo}'");

Asynchronously retrieves an enumerable collection of all rules in the service namespace.

The topic path relative to the service namespace base address. The name of the subscription. The asynchronous operation.

Asynchronously retrieves an enumerable collection of all rules in the service namespace with specified topic path, subscription name and filter.

The topic path relative to the service namespace base address. The name of the subscription. The string used to filter the rules to be retrieved. The asynchronous operation. Filter expression format: {Propery} {Logical Operator} {Value} {Filter expression} ----------------------------------------------------------------------------------------- Available properties: ModifiedAt | AccessedAt | CreatedAt Logical operators: Eq | Ne | Gt | Ge | Lt | Le Value: A value of the corresponding property type var fiveMinutesAgo = DateTime.UtcNow.AddMinutes(-5).ToString("M/dd/yyyy hh:mm:ss"); var rulesInTheLast5Minutes = await namespaceManager.GetRulesAsync(topicName, subscriptionName, $"createdAt gt '{fiveMinutesAgo}'");

Constructor.

The feed. the action that will act upon the feed.

Gets or sets the feed.

The feed.

Gets the push agent.

The push agents.

Constructor.

The feed.

Gets or sets the feed.

The feed.

Gets the queues.

The queues.

Contains the settings for the namespace manager.

Initializes a new instance of the class.

Gets or sets the operation timeout period for all service namespace management operations, such as GetQueue, CreateQueue, and so on.

A object that represents the timeout period. The default value is 1 minute.

Gets or sets the base implementation of the retry mechanism for unreliable actions and transient conditions associated with the namespace manager.

The base implementation of the retry mechanism for unreliable actions and transient conditions associated with the namespace manager.

Gets or sets the security token provider.

The security token provider.

Gets localized string like: This messaging entity is not in an open state.

Gets localized string like: This messaging entity has already been closed, aborted, or disposed.

Gets localized string like: This event data instance has already been disposed.

Gets localized string like: The message body cannot be read multiple times. To reuse it store the value after reading.

Gets localized string like: The XML returned is not in the expected format.

Gets localized string like: The provided ip address mask does not follow the CIDR notation.

Gets localized string like: The provided ip address mask contain invalid CIDR value. CIDR has to be a byte representation under 32. if 0, then it has to be the format '0.0.0.0/0'

Gets localized string like: Ip has been prevented to connect to the endpoint.

Gets localized string like: The buffer has already been reclaimed.

Gets localized string like: A received message cannot be directly sent to another entity. Construct a new message object instead.

Gets localized string like: The only supported IsolationLevel is 'IsolationLevel.Serializable'.

Gets localized string like: The message body is null.

Gets localized string like: Reading is not supported on this stream.

Gets localized string like: Seeking is not supported on this stream.

Gets localized string like: The value of this argument must be non-negative.

Gets localized string like: Failed to serialize the message because its body stream has been partially consumed.

Gets localized string like: Failed to serialize the message because the number of bytes read from its body stream did not match the expected length.

Gets localized string like: Failed to deserialize the message because the number of bytes read from its body stream did not match the expected length.

Gets localized string like: Failed to serialize the session state because its state stream has been partially consumed.

Gets localized string like: Failed to serialize the session state because the number of bytes read from its state stream did not match the expected length.

Gets localized string like: Failed to deserialize the session state because the number of bytes read from its state stream did not match the expected length.

Gets localized string like: Sbmp

Gets localized string like: Local transactions are not supported with other resource managers/DTC.

Gets localized string like: Internal Server Error: The server did not provide a meaningful reply; this might be caused by a premature session shutdown.

Gets localized string like: Cannot directly create a client on a sub-queue. Create a client on the main queue and use that to create receivers on the appropriate sub-queue.

Gets localized string like: Cannot perform this operation on a session browser.

Gets localized string like: The BatchFlushInterval that is specified in the settings is not valid.

Gets localized string like: The filter expression computation time exceeded the allowed value. Reduce the complexity of the expression.

Gets localized string like: This operation is only supported for a message receiver in 'PeekLock' receive mode.

Gets localized string like: The action must be processed.

Gets localized string like: The filter must be processed.

Gets localized string like: The operation cannot be performed because the entity has been closed or aborted.

Gets localized string like: Error during communication with Service Bus. Check the connection information, then retry.

Gets localized string like: This asynchronous operation was aborted because the overall batching operation was aborted.

Gets localized string like: Cannot create a MessageSession for a sub-queue.

Gets localized string like: Use overload which allows specifying a base address.

Gets localized string like: Filter property must be set to a valid FilterTemplate instance.

Gets localized string like: At least one system or user property must be set for a correlation filter.

Gets localized string like: The usage of RefcountedCommunicationObject is invalid.

Gets localized string like: Invalid state-machine in RefcountedCommunicationObject.

Gets localized string like: ConnectionStatusBehavior requires an IChannelListener that exposes IConnectionStatus.

Gets localized string like: The Stream was closed.

Gets localized string like: Invalid Call.

Gets localized string like: Maximum connect attempts exceeded.

Gets localized string like: Connect process failed.

Gets localized string like: The ID is invalid.

Gets localized string like: Endpoint not found.

Gets localized string like: Duplicate connection ID.

Gets localized string like: The buffer size is invalid.

Gets localized string like: listener.Type length exceeds maximum allowed.

Gets localized string like: CredentialType is either unrecognized or unable to create HTTP authorization token.

Gets localized string like: Policy is read-only.

Gets localized string like: Endpoint not found.

Gets localized string like: Duplicate connection ID.

Gets localized string like: Invalid configuration. Unable to use transport protection with Hybrid mode.

Gets localized string like: Transport security is required to protect the security token. The URI schema must be set to HTTPS.

Gets localized string like: The token provider does not support HTTP authorization token.

Gets localized string like: The message has an unexpected format other than SOAP and HTTP.

Gets localized string like: Invalid channel type.

Gets localized string like: Incompatible channel listener settings.

Gets localized string like: SamlCredential and its SamlToken cannot be null or empty.

Gets localized string like: stsUri must end with a '/'.

Gets localized string like: Parameter 'issuerName' cannot be null or empty.

Gets localized string like: Parameter 'issuerSecret' cannot be null or empty.

Gets localized string like: The 'issuerSecret' is invalid.

Gets localized string like: The provided token does not specify the 'ExpiresOn' value.

Gets localized string like: The string has an invalid encoding format.

Gets localized string like: The string has an unsupported encoding type.

Gets localized string like: Parameter 'simpleWebToken' cannot be null or empty.

Gets localized string like: 'value' must be at least 1.

Gets localized string like: This TokenProvider does not support BeginGetWebToken call.

Gets localized string like: Parameter appliesTo cannot be null or empty.

Gets localized string like: Hostname cannot be null or empty.

Gets localized string like: The timeout is too large.

Gets localized string like: The pump is already running.

Gets localized string like: Cannot find relay certificate.

Gets localized string like: A request from the client instance has exceeded the maximum message size, and the underlying channel will be recreated. Validate the content size before retrying.

Gets localized string like: Did not receive any bytes from expected read.

Gets localized string like: Unable to connect to Service Bus using HTTP connectivity mode.

Gets localized string like: Unable to connect downstream.

Gets localized string like: Unable to close connection.

Gets localized string like: Unable to connect upstream.

Gets localized string like: Error creating endpoint Uri for connecting to the Service Bus.

Gets localized string like: Faulty response from factory endpoint - locations were not returned.

Gets localized string like: Unable to connect to factory endpoint.

Gets localized string like: The web stream has been shut down - can no longer write to the stream.

Gets localized string like: Cannot set the value at this time.

Gets localized string like: More than one relay 'connection-mode' assertion was found.

Gets localized string like: Unsupported TokenProvider type.

Gets localized string like: Manually issuing credit on a link with auto-flow enabled is not allowed.

Gets localized string like: The list size must be exactly the same as the encoded value length.

Gets localized string like: Message listener is already registered.

Gets localized string like: Credit listener is already registered.

Gets localized string like: Disposition listener is already registered.

Gets localized string like: Not supported when the disposition listener is set.

Gets localized string like: Cannot set target host because the server certificate is already set.

Gets localized string like: Cannot set server certificate because the client target host is already set.

Gets localized string like: Either the client target host or the server certificate must be set.

Gets localized string like: TargetHost must be set.

Gets localized string like: Service certificate must be set.

Gets localized string like: The asynchronous result is still in use.

Gets localized string like: The asynchronous result is different.

Gets localized string like: The asynchronous result is not in use.

Gets localized string like: Resource descriptions is null or empty.

Gets localized string like: Resource names is null or empty.

Gets localized string like: Service namespace cannot be null or empty.

Gets localized string like: Path segments in 'servicePath' can only contain ASCII characters.

Gets localized string like: A SystemTracker header was not present.

Gets localized string like: A SystemTracker property was not present.

Gets localized string like: A TrackingID header was not present.

Gets localized string like: A TrackingID property was not present.

Gets localized string like: The lock supplied is invalid. Either the lock expired, or the message has already been removed from the queue.

Gets localized string like: The session lock has expired on the MessageSession. Accept a new MessageSession.

Gets localized string like: IOThreadTimer cannot accept Timespan.MaxValue.

Gets localized string like: Socket communication error.

Gets localized string like: Failed to convert to a char.

Gets localized string like: The length of received content is not correct.

Gets localized string like: Received empty content or invalid type of content.

Gets localized string like: The session id from received content does not match.

Gets localized string like: More than one address candidate exists for the given type.

Gets localized string like: More than one IPEndPoint exists for the given type.

Gets localized string like: Given type of channel is not supported.

Gets localized string like: Can't find appropriate address.

Gets localized string like: Can't read raw data from token.

Gets localized string like: The root is null.

Gets localized string like: The Service Bus connection string is not of the expected format. Either there are unexpected properties within the string or the format is incorrect. Please check the string before trying again.

Gets localized string like: The supplied value contains invalid format for the argument.

Gets localized string like: The method 'OnMessage' or 'OnMessageAsync' has already been called.

Gets localized string like: The service was unable to process the request; please retry the operation. For more information on exception types and proper exception handling, please refer to http://go.microsoft.com/fwlink/?LinkId=761101

Gets localized string like: Manage permission should also include Send and Listen.

Gets localized string like: The AccessRights on an Authorization Rule must be unique.

Gets localized string like: The bodyTemplate is not in accepted XML format. The first node of the bodyTemplate should be Badge/Tile/Toast, except wns/raw template, which need to be a valid XML.

Gets localized string like: The payload is not in accepted XML format. The first node should be Badge/Tile/Toast. If want to send raw notification, please set header to wns/raw.

Gets localized string like: Connection string contains unsupported schema for endPoint. Only "sb://" is supported.

Gets localized string like: This TokenProvider does not support changing the Token Scope.

Gets localized string like: Each Shared Access Authorization Rule key name must be unique.

Gets localized string like: PairNamespace can only be called once per MessagingFactory.

Gets localized string like: The secondary MessagingFactory inside the pairing option has already been paired to another MessagingFactory.

Gets localized string like: The MessagingFactory in the paired namespace option should not have any paired namespace option defined in itself.

Gets localized string like: Cannot change the MessagingFactory once it has been set.

Gets localized string like: The message appears to have been placed in a backlog queue by an agent that does not use the SendAvailability feature in the Service Bus SDK. Please do not use this queue for general scenarios.

Gets localized string like: Destination queue not indicated in message when fetched from backlog.

Gets localized string like: The message cannot be delivered to the destination.

Gets localized string like: Send availability is not supported because no transfer queues were created or found.

Gets localized string like: The backlog queue cannot be empty.

Gets localized string like: The primary and secondary paired namespaces are identical. The code must use different namespaces.

Gets localized string like: Valid range is 1 to 30 minutes.

Gets localized string like: The entity was created with a paired namespace. Ping detected that this entity is unreachable due to a non-transient error. The message will not be sent to the paired namespace. See the inner exception for more details.

Gets localized string like: (null)

Gets localized string like: Invalid type in property.

Gets localized string like: Expression type '$body' is not supported.

Gets localized string like: The certificate specified in apple credentials is expired.

Gets localized string like: The certificate specified in apple credentials is not valid yet.

Gets localized string like: The certificate specified in apple credentials does not have a private key.

Gets localized string like: The specified APNS Endpoint is not allowed.

Gets localized string like: ApnsCertificate, CertificateKey or Endpoint is either not specified or invalid.

Gets localized string like: Only 3 properties ApnsCertificate, CertificateKey and Endpoint are required.

Gets localized string like: Cannot specify ExpirationTime.

Gets localized string like: Channel URI is either null, empty or not absolute value.

Gets localized string like: One or more characters in device token is not a hexadecimal digit.

Gets localized string like: Device token is either empty OR it has odd number of nibbles.

Gets localized string like: Expiry value is empty. When specified, a valid expiry value is required.

Gets localized string like: Expiry value could not be deserialized to a date time.

Gets localized string like: Failed to deserialize the body template.

Gets localized string like: GcmEndpoint is either not specified or invalid.

Gets localized string like: GCM Registration Id is invalid.

Gets localized string like: Only GoogleApiKey and GcmEndpoint are required.

Gets localized string like: GoogleApiKey is either not specified or invalid.

Gets localized string like: Invalid GcmEndpoint specified.

Gets localized string like: NokiaXEndpoint is either not specified or invalid.

Gets localized string like: NokiaX Registration Id is invalid.

Gets localized string like: Only authorization key and NokiaXEndpoint are required.

Gets localized string like: NokiaX Authorization Key is either not specified or invalid.

Gets localized string like: Invalid NokiaXEndpoint specified.

Gets localized string like: BaiduEndpoint is either not specified or invalid.

Gets localized string like: Baidu Registration Id is invalid.

Gets localized string like: Only API key and NokiaXEndpoint are required.

Gets localized string like: Baidu Api Key is either not specified or invalid.

Gets localized string like: Invalid BaiduEndpoint specified.

Gets localized string like: Invalid WindowsLiveEndpoint specified.

Gets localized string like: Only 2 properties PackageSid and SecretKey are required.

Gets localized string like: PackageSid or SecretKey is either not specified or invalid"

Gets localized string like: Token type '#(prop)' is not allowed in composite expression.

Gets localized string like: The bodyTemplate is not in accepted XML format. The first node of the bodyTemplate should be Tile/Toast, except raw template.

Gets localized string like: The payload is not in accepted XML format. The first node should be Tile/Toast. If want to send raw notification, please set "X-NotificationClass" to "3" in header.

Gets localized string like: The certificate specified in mpns credentials is not valid yet.

Gets localized string like: The certificate specified in mpns credentials is expired.

Gets localized string like: The certificate specified in mpns credentials does not have a private key.

Gets localized string like: MpnsCertificate or CertificateKey is either not specified or invalid.

Gets localized string like: Only 2 properties MpnsCertificate and CertificateKey are required.

Gets localized string like: PartitionKey must be equal to SessionId when SessionId has a value different than null. Assign null to SessionId to be able to set PartitionKey.

Gets localized string like: Batching brokered messages with distinct SessionId or PartitionKey is not supported for an entity with partitioning enabled.

Gets localized string like: Batching brokered messages with distinct SessionId, PartitionKey, or MessageId is not supported for an entity with partitioning and duplicate detection enabled.

Gets localized string like: PartitionKey or SessionId is missing. Transaction with partitioned entities require PartitionKey or SessionId to be set in the brokered message.

Gets localized string like: Sending message through a via message sender requires BrokeredMessage.ViaPartitionKey to be set.

Gets localized string like: Batching lock tokens for different partitions is not supported for an entity with partitioning enabled.

Gets localized string like: ReceiveBatch of sequence numbers from different partitions is not supported for an entity with partitioning enabled.

Gets localized string like: The operation is not supported for an entity with partitioning enabled.

Gets localized string like: Invalid payload format. Either Json object or valid Xml are allowed.

Gets localized string like: A session handler is already registered or being registered.

Gets localized string like: AuthTokenUrl is invalid.

Gets localized string like: The message contain no data.

Gets localized string like: EventHubDescription.Path must either be null or match EventHubClient.Path.

Gets localized string like: Cannot explicitly create receiver when using a EventHubProcessor is attached.

Gets localized string like: ADM Registration Id is invalid.

Gets localized string like: ADM send notification endpoint URL template is invalid.

Gets localized string like: The operation cannot be completed because the ReceiveContext is null.

Gets localized string like: The provided token does not specify the 'Audience' value.

Gets localized string like: This object is read-only and cannot be modified.

Gets localized string like: Checkpoint is disabled for this ConsuemerGroup.

Gets localized string like: There are no event data supplied. Please make sure input events are not empty.

Gets localized string like: PartitionKey must be equal to Publisher while sending from Publisher

Gets localized string like: Publisher must be equal to SessionId when SessionId has a Value

Gets localized string like: This operation is not available for your tier

Gets localized string like: The requested HTTP operation is not supported in an EventHub.

Gets localized string like: Sending to Publisher is not supported when using Partitioned Senders.

Gets localized string like: Sending to Publisher is not supported when using EventHubClient. Please use EventHubSender instead.

Gets localized string like: Publisher should be specified in conjunction with EntityPath only.

Gets localized string like: Publisher property cannot be set to a different value in the incoming message.

Gets localized string like: Publisher property can only be set by the Service and cannot be set at Client. The only way to let Service to populate this property is - to send using publisher tokens. Refer to EventHubSender.CreateFromConnectionString(connStr).

Gets localized string like: Token type '#(prop)' is not allowed in composite expression.

Gets localized string like: Transactions are not supported when sending batches of messages to different physical partitions for a queue or topic with EnablePartitioning set to true.

Gets localized string like: Rules with action is not supported in a partitioned topic.

Gets localized string like: Transactions are not supported when completing batches containing lock tokens belonging to different physical partitions for a queue or topic with EnablePartitioning set to true.

Gets localized string like: The service is unable to determine the successful completion of this request.

Gets localized string like: Cannot set both token and certificate for APNS.

Gets localized string like: To use APNS token, the key id, application id and application name need to be set.

Gets localized string like: A valid endpoint for APNS is required.

Gets localized string like: None exclusive session mode supported only on Premium Messaging and sbmp client

Gets localized string like: IP Address doesn't belong to acled subnet.

Gets localized string like: The communication object, {0}, cannot be used because it is in a faulted state.

Parameter 0 for string: The communication object, {0}, cannot be used because it is in a faulted state.

Gets localized string like: The entity path/name '{0}' exceeds the '{1}' character limit.

Parameter 0 for string: The entity path/name '{0}' exceeds the '{1}' character limit. Parameter 1 for string: The entity path/name '{0}' exceeds the '{1}' character limit.

Gets localized string like: The template name exceeds the '{0}' character limit.

Parameter 0 for string: The template name exceeds the '{0}' character limit.

Gets localized string like: The supplied lock time exceeds the allowed maximum of '{0}' minutes.

Parameter 0 for string: The supplied lock time exceeds the allowed maximum of '{0}' minutes.

Gets localized string like: The supplied duplicate detection history duration exceeds the maximum allowed value of '{0}' minutes.

Parameter 0 for string: The supplied duplicate detection history duration exceeds the maximum allowed value of '{0}' minutes.

Gets localized string like: There was an error parsing the SQL expression. [Token line={0}, column={1}, Token in error= {2}]

Parameter 0 for string: There was an error parsing the SQL expression. [Token line={0}, column={1}, Token in error= {2}] Parameter 1 for string: There was an error parsing the SQL expression. [Token line={0}, column={1}, Token in error= {2}] Parameter 2 for string: There was an error parsing the SQL expression. [Token line={0}, column={1}, Token in error= {2}]

Gets localized string like: There was an error parsing the SQL expression. [Token line={0}, column={1}, Token in error= {2}, Additional details= {3}]

Parameter 0 for string: There was an error parsing the SQL expression. [Token line={0}, column={1}, Token in error= {2}, Additional details= {3}] Parameter 1 for string: There was an error parsing the SQL expression. [Token line={0}, column={1}, Token in error= {2}, Additional details= {3}] Parameter 2 for string: There was an error parsing the SQL expression. [Token line={0}, column={1}, Token in error= {2}, Additional details= {3}] Parameter 3 for string: There was an error parsing the SQL expression. [Token line={0}, column={1}, Token in error= {2}, Additional details= {3}]

Gets localized string like: The provided URI scheme '{0}' is invalid; expected '{1}'.

Parameter 0 for string: The provided URI scheme '{0}' is invalid; expected '{1}'. Parameter 1 for string: The provided URI scheme '{0}' is invalid; expected '{1}'.

Gets localized string like: The size quota for this stream ({0}) has been exceeded.

Parameter 0 for string: The size quota for this stream ({0}) has been exceeded.

Gets localized string like: The messaging entity '{0}' already exists.

Parameter 0 for string: The messaging entity '{0}' already exists.

Gets localized string like: The messaging entity '{0}' could not be found.

Parameter 0 for string: The messaging entity '{0}' could not be found.

Gets localized string like: An error occurred during communication with '{0}'. Check the connection information, then retry.

Parameter 0 for string: An error occurred during communication with '{0}'. Check the connection information, then retry.

Gets localized string like: The specified channel type {0} is not supported by this channel manager.

Parameter 0 for string: The specified channel type {0} is not supported by this channel manager.

Gets localized string like: The {1} binding does not have a configured binding named '{0}'.

Parameter 0 for string: The {1} binding does not have a configured binding named '{0}'. Parameter 1 for string: The {1} binding does not have a configured binding named '{0}'.

Gets localized string like: Could not resolve any addresses for entity '{0}'.

Parameter 0 for string: Could not resolve any addresses for entity '{0}'.

Gets localized string like: The operation cannot be performed because the brokered message '{0}' has already been consumed. Please use a new BrokeredMessage instance for the operation.

Parameter 0 for string: The operation cannot be performed because the brokered message '{0}' has already been consumed. Please use a new BrokeredMessage instance for the operation.

Gets localized string like: A message cannot have more than '{0}' properties. Found '{1}' properties.

Parameter 0 for string: A message cannot have more than '{0}' properties. Found '{1}' properties. Parameter 1 for string: A message cannot have more than '{0}' properties. Found '{1}' properties.

Gets localized string like: The size of message property '{0}' exceeds the limit of '{1}' bytes.

Parameter 0 for string: The size of message property '{0}' exceeds the limit of '{1}' bytes. Parameter 1 for string: The size of message property '{0}' exceeds the limit of '{1}' bytes.

Gets localized string like: The endpoint address '{0}' must specify the name of the messaging entity. Expected 'sb://resourcelocator/entityname'.

Parameter 0 for string: The endpoint address '{0}' must specify the name of the messaging entity. Expected 'sb://resourcelocator/entityname'.

Gets localized string like: Serialization operation failed due to unsupported type {0}.

Parameter 0 for string: Serialization operation failed due to unsupported type {0}.

Gets localized string like: Deserialize operation failed due to unsupported property {0}.

Parameter 0 for string: Deserialize operation failed due to unsupported property {0}.

Gets localized string like: There was an overflow when adding the values {0} and {1} of the type {2}.

Parameter 0 for string: There was an overflow when adding the values {0} and {1} of the type {2}. Parameter 1 for string: There was an overflow when adding the values {0} and {1} of the type {2}. Parameter 2 for string: There was an overflow when adding the values {0} and {1} of the type {2}.

Gets localized string like: The property {0} cannot be assigned to.

Parameter 0 for string: The property {0} cannot be assigned to.

Gets localized string like: The property {0} cannot be assigned from.

Parameter 0 for string: The property {0} cannot be assigned from.

Gets localized string like: The specified property {0} does not exist, or it is not a gettable property of the {1} class.

Parameter 0 for string: The specified property {0} does not exist, or it is not a gettable property of the {1} class. Parameter 1 for string: The specified property {0} does not exist, or it is not a gettable property of the {1} class.

Gets localized string like: The length of the filter action statement is {0}, which exceeds the maximum length of {1}.

Parameter 0 for string: The length of the filter action statement is {0}, which exceeds the maximum length of {1}. Parameter 1 for string: The length of the filter action statement is {0}, which exceeds the maximum length of {1}.

Gets localized string like: There are {0} statements defined in the filter action, which exceeds the allowed maximum of {1}.

Parameter 0 for string: There are {0} statements defined in the filter action, which exceeds the allowed maximum of {1}. Parameter 1 for string: There are {0} statements defined in the filter action, which exceeds the allowed maximum of {1}.

Gets localized string like: sessionId:messageId '{0}':'{1}' This correlation response was previously received or not expected.

Parameter 0 for string: sessionId:messageId '{0}':'{1}' This correlation response was previously received or not expected. Parameter 1 for string: sessionId:messageId '{0}':'{1}' This correlation response was previously received or not expected.

Gets localized string like: sessionId:messageId '{0}':'{1}' There was no correlation response for the channel message.

Parameter 0 for string: sessionId:messageId '{0}':'{1}' There was no correlation response for the channel message. Parameter 1 for string: sessionId:messageId '{0}':'{1}' There was no correlation response for the channel message.

Gets localized string like: sessionId:messageId '{0}':'{1}' Sent a correlation message over the channel session.

Parameter 0 for string: sessionId:messageId '{0}':'{1}' Sent a correlation message over the channel session. Parameter 1 for string: sessionId:messageId '{0}':'{1}' Sent a correlation message over the channel session.

Gets localized string like: sessionId:relatesTo '{0}':'{1}' Received a correlation message over the channel session.

Parameter 0 for string: sessionId:relatesTo '{0}':'{1}' Received a correlation message over the channel session. Parameter 1 for string: sessionId:relatesTo '{0}':'{1}' Received a correlation message over the channel session.

Gets localized string like: The request has timed out after {0} milliseconds. The successful completion of the request cannot be determined. Additional queries should be made to determine whether or not the operation has succeeded. For more information on exception types and proper exception handling, please refer to http://go.microsoft.com/fwlink/?LinkId=761101

Parameter 0 for string: The request has timed out after {0} milliseconds. The successful completion of the request cannot be determined. Additional queries should be made to determine whether or not the operation has succeeded. For more information on exception types and proper exception handling, please refer to http://go.microsoft.com/fwlink/?LinkId=761101

Gets localized string like: An error occurred while creating the queue '{0}'. {1}

Parameter 0 for string: An error occurred while creating the queue '{0}'. {1} Parameter 1 for string: An error occurred while creating the queue '{0}'. {1}

Gets localized string like: An error occurred while deleting the queue '{0}'. {1}

Parameter 0 for string: An error occurred while deleting the queue '{0}'. {1} Parameter 1 for string: An error occurred while deleting the queue '{0}'. {1}

Gets localized string like: An error occurred while creating the subscription '{0}' for the topic {1}. {2}

Parameter 0 for string: An error occurred while creating the subscription '{0}' for the topic {1}. {2} Parameter 1 for string: An error occurred while creating the subscription '{0}' for the topic {1}. {2} Parameter 2 for string: An error occurred while creating the subscription '{0}' for the topic {1}. {2}

Gets localized string like: An error occurred while creating the topic '{0}'. {1}

Parameter 0 for string: An error occurred while creating the topic '{0}'. {1} Parameter 1 for string: An error occurred while creating the topic '{0}'. {1}

Gets localized string like: An error occurred while deleting the topic '{0}'. {1}

Parameter 0 for string: An error occurred while deleting the topic '{0}'. {1} Parameter 1 for string: An error occurred while deleting the topic '{0}'. {1}

Gets localized string like: Incompatible queue export type. Expected type {0} or {1}. Specified type is {2}.

Parameter 0 for string: Incompatible queue export type. Expected type {0} or {1}. Specified type is {2}. Parameter 1 for string: Incompatible queue export type. Expected type {0} or {1}. Specified type is {2}. Parameter 2 for string: Incompatible queue export type. Expected type {0} or {1}. Specified type is {2}.

Gets localized string like: Incompatible topic export type. Expected type {0} or {1}. Specified type is {2}.

Parameter 0 for string: Incompatible topic export type. Expected type {0} or {1}. Specified type is {2}. Parameter 1 for string: Incompatible topic export type. Expected type {0} or {1}. Specified type is {2}. Parameter 2 for string: Incompatible topic export type. Expected type {0} or {1}. Specified type is {2}.

Gets localized string like: Provide a valid sub-queue name. The allowed values are: '{0}'.

Parameter 0 for string: Provide a valid sub-queue name. The allowed values are: '{0}'.

Gets localized string like: Cannot convert the filter action of type '{0}'.

Parameter 0 for string: Cannot convert the filter action of type '{0}'.

Gets localized string like: Cannot convert the filter expression of type '{0}'.

Parameter 0 for string: Cannot convert the filter expression of type '{0}'.

Gets localized string like: The Uri address given contains a path which is not allowed. Remove the path from the supplied Uri {0}.

Parameter 0 for string: The Uri address given contains a path which is not allowed. Remove the path from the supplied Uri {0}.

Gets localized string like: The entity name or path cannot contain '/' as prefix or suffix. The supplied value is '{0}'.

Parameter 0 for string: The entity name or path cannot contain '/' as prefix or suffix. The supplied value is '{0}'.

Gets localized string like: The entity name or path contains an invalid character '{0}'. The supplied value is '{1}'.

Parameter 0 for string: The entity name or path contains an invalid character '{0}'. The supplied value is '{1}'. Parameter 1 for string: The entity name or path contains an invalid character '{0}'. The supplied value is '{1}'.

Gets localized string like: The value supplied must be between {0} and {1}.

Parameter 0 for string: The value supplied must be between {0} and {1}. Parameter 1 for string: The value supplied must be between {0} and {1}.

Gets localized string like: The length of the filter statement is {0}, which exceeds the maximum length of {1}

Parameter 0 for string: The length of the filter statement is {0}, which exceeds the maximum length of {1} Parameter 1 for string: The length of the filter statement is {0}, which exceeds the maximum length of {1}

Gets localized string like: The message ID is either null, empty, or exceeds the maximum allowed size of {0} characters.

Parameter 0 for string: The message ID is either null, empty, or exceeds the maximum allowed size of {0} characters.

Gets localized string like: The session ID exceeds the maximum allowed size of {0} characters.

Parameter 0 for string: The session ID exceeds the maximum allowed size of {0} characters.

Gets localized string like: Cannot get entity '{0}' because it is not of type {1}. Check that you are using method(s) with the correct entity type.

Parameter 0 for string: Cannot get entity '{0}' because it is not of type {1}. Check that you are using method(s) with the correct entity type. Parameter 1 for string: Cannot get entity '{0}' because it is not of type {1}. Check that you are using method(s) with the correct entity type.

Gets localized string like: {0} {1}

Parameter 0 for string: {0} {1} Parameter 1 for string: {0} {1}

Gets localized string like: {0} Reference:{1}, {2}

Parameter 0 for string: {0} Reference:{1}, {2} Parameter 1 for string: {0} Reference:{1}, {2} Parameter 2 for string: {0} Reference:{1}, {2}

Gets localized string like: TrackingId:{0}, Timestamp:{1}

Parameter 0 for string: TrackingId:{0}, Timestamp:{1} Parameter 1 for string: TrackingId:{0}, Timestamp:{1}

Gets localized string like: TrackingId:{0}, SystemTracker:{1}, Timestamp:{2}

Parameter 0 for string: TrackingId:{0}, SystemTracker:{1}, Timestamp:{2} Parameter 1 for string: TrackingId:{0}, SystemTracker:{1}, Timestamp:{2} Parameter 2 for string: TrackingId:{0}, SystemTracker:{1}, Timestamp:{2}

Gets localized string like: A system property cannot be removed. The system property specified was '{0}'.

Parameter 0 for string: A system property cannot be removed. The system property specified was '{0}'.

Gets localized string like: The specified scope ({0}) is not supported.

Parameter 0 for string: The specified scope ({0}) is not supported.

Gets localized string like: The specified compatibility level ({0}) is not supported.

Parameter 0 for string: The specified compatibility level ({0}) is not supported.

Gets localized string like: The specified property ({0}) does not exist or it is not a settable property of the {1} class.

Parameter 0 for string: The specified property ({0}) does not exist or it is not a settable property of the {1} class. Parameter 1 for string: The specified property ({0}) does not exist or it is not a settable property of the {1} class.

Gets localized string like: '{0}' is a reserved keyword. Use a delimited identifier if you intended to use a reserved keyword as a property name.

Parameter 0 for string: '{0}' is a reserved keyword. Use a delimited identifier if you intended to use a reserved keyword as a property name.

Gets localized string like: The delimited identifier ({0}) was not terminated properly.

Parameter 0 for string: The delimited identifier ({0}) was not terminated properly.

Gets localized string like: The string ({0}) was not terminated properly.

Parameter 0 for string: The string ({0}) was not terminated properly.

Gets localized string like: The '{0}' function expects {1} argument(s), but {2} argument(s) was/were specified.

Parameter 0 for string: The '{0}' function expects {1} argument(s), but {2} argument(s) was/were specified. Parameter 1 for string: The '{0}' function expects {1} argument(s), but {2} argument(s) was/were specified. Parameter 2 for string: The '{0}' function expects {1} argument(s), but {2} argument(s) was/were specified.

Gets localized string like: The specified function name ({0}) is unknown. Make sure the function name is correct.

Parameter 0 for string: The specified function name ({0}) is unknown. Make sure the function name is correct.

Gets localized string like: The string ('{0}...') length is {1} and it is longer than allowed. Maximum string length allowed is {2}.

Parameter 0 for string: The string ('{0}...') length is {1} and it is longer than allowed. Maximum string length allowed is {2}. Parameter 1 for string: The string ('{0}...') length is {1} and it is longer than allowed. Maximum string length allowed is {2}. Parameter 2 for string: The string ('{0}...') length is {1} and it is longer than allowed. Maximum string length allowed is {2}.

Gets localized string like: {0} '{1}' contains character(s) that are not allowed by Service Bus. Entity names or path can contain only letters, numbers, periods (.), hyphens (-), and underscores (_).

Parameter 0 for string: {0} '{1}' contains character(s) that are not allowed by Service Bus. Entity names or path can contain only letters, numbers, periods (.), hyphens (-), and underscores (_). Parameter 1 for string: {0} '{1}' contains character(s) that are not allowed by Service Bus. Entity names or path can contain only letters, numbers, periods (.), hyphens (-), and underscores (_).

Gets localized string like: The property '{0}' is null or empty.

Parameter 0 for string: The property '{0}' is null or empty.

Gets localized string like: Messaging entity '{0}' is currently disabled.

Parameter 0 for string: Messaging entity '{0}' is currently disabled.

Gets localized string like: A PropertyReference instance ({0}) is used without being part of RuleCreationAction.Initializes property.

Parameter 0 for string: A PropertyReference instance ({0}) is used without being part of RuleCreationAction.Initializes property.

Gets localized string like: Certificate '{0}' is in the untrusted store.

Parameter 0 for string: Certificate '{0}' is in the untrusted store.

Gets localized string like: Certificate '{0}' is not used in its valid time period.

Parameter 0 for string: Certificate '{0}' is not used in its valid time period.

Gets localized string like: CRL check failed for certificate '{0}'.

Parameter 0 for string: CRL check failed for certificate '{0}'.

Gets localized string like: Cannot find transaction result for the transaction id '{0}'.

Parameter 0 for string: Cannot find transaction result for the transaction id '{0}'.

Gets localized string like: Unexpected type encountered. Expected '{0}' or '{1}', but received '{2}'.

Parameter 0 for string: Unexpected type encountered. Expected '{0}' or '{1}', but received '{2}'. Parameter 1 for string: Unexpected type encountered. Expected '{0}' or '{1}', but received '{2}'. Parameter 2 for string: Unexpected type encountered. Expected '{0}' or '{1}', but received '{2}'.

Gets localized string like: Invalid element: {0}.

Parameter 0 for string: Invalid element: {0}.

Gets localized string like: {0} is not a supported channel-type

Parameter 0 for string: {0} is not a supported channel-type

Gets localized string like: Unsupported ConnectivityMode '{0}'.

Parameter 0 for string: Unsupported ConnectivityMode '{0}'.

Gets localized string like: Unable to retrieve the '{0}' header from the message.

Parameter 0 for string: Unable to retrieve the '{0}' header from the message.

Gets localized string like: Unable to retrieve the '{0}' header from the response.

Parameter 0 for string: Unable to retrieve the '{0}' header from the response.

Gets localized string like: {0}: unable to read Atom XML content.

Parameter 0 for string: {0}: unable to read Atom XML content.

Gets localized string like: {0}: ContentType is incorrect

Parameter 0 for string: {0}: ContentType is incorrect

Gets localized string like: Unable to reach {0} via TCP ({1}, {2}) or HTTP (80, 443).

Parameter 0 for string: Unable to reach {0} via TCP ({1}, {2}) or HTTP (80, 443). Parameter 1 for string: Unable to reach {0} via TCP ({1}, {2}) or HTTP (80, 443). Parameter 2 for string: Unable to reach {0} via TCP ({1}, {2}) or HTTP (80, 443).

Gets localized string like: Exceeded the maximum allowed redirects: {0}.

Parameter 0 for string: Exceeded the maximum allowed redirects: {0}.

Gets localized string like: Found {0} DNS claims in authorization context.

Parameter 0 for string: Found {0} DNS claims in authorization context.

Gets localized string like: Scheme of base address must be '{0}'.

Parameter 0 for string: Scheme of base address must be '{0}'.

Gets localized string like: Unsupported action '{0}'.

Parameter 0 for string: Unsupported action '{0}'.

Gets localized string like: The Uri provided {0} does not match Service Bus domain: {1}.

Parameter 0 for string: The Uri provided {0} does not match Service Bus domain: {1}. Parameter 1 for string: The Uri provided {0} does not match Service Bus domain: {1}.

Gets localized string like: Uri {0} cannot support more than 1 prefix for Service Bus domain: {1}.

Parameter 0 for string: Uri {0} cannot support more than 1 prefix for Service Bus domain: {1}. Parameter 1 for string: Uri {0} cannot support more than 1 prefix for Service Bus domain: {1}.

Gets localized string like: Unexpected SSL signal value '{0}' found in preamble message.

Parameter 0 for string: Unexpected SSL signal value '{0}' found in preamble message.

Gets localized string like: Invalid frame size:{0}, maximum frame size:{1}.

Parameter 0 for string: Invalid frame size:{0}, maximum frame size:{1}. Parameter 1 for string: Invalid frame size:{0}, maximum frame size:{1}.

Gets localized string like: The feature '{0}' is not supported with the current configuration.

Parameter 0 for string: The feature '{0}' is not supported with the current configuration.

Gets localized string like: {0} is not currently supported in BrokeredMessage application properties.

Parameter 0 for string: {0} is not currently supported in BrokeredMessage application properties.

Gets localized string like: Rights cannot be null, empty or greater than {0}.

Parameter 0 for string: Rights cannot be null, empty or greater than {0}.

Gets localized string like: Unsupported Right '{0}'. The Supported Rights are '{1}'.

Parameter 0 for string: Unsupported Right '{0}'. The Supported Rights are '{1}'. Parameter 1 for string: Unsupported Right '{0}'. The Supported Rights are '{1}'.

Gets localized string like: GetClaim does not support linkInfo.LinkType '{0}'.

Parameter 0 for string: GetClaim does not support linkInfo.LinkType '{0}'.

Gets localized string like: Invalid scheme value, must be http, or https, or {0}.

Parameter 0 for string: Invalid scheme value, must be http, or https, or {0}.

Gets localized string like: Invalid service namespace: \"{0}\".

Parameter 0 for string: Invalid service namespace: \"{0}\".

Gets localized string like: Current environment is onebox but input Uri has an invalid path {0}.

Parameter 0 for string: Current environment is onebox but input Uri has an invalid path {0}.

Gets localized string like: The Uri \"{0}\" has an unexpected hostname.

Parameter 0 for string: The Uri \"{0}\" has an unexpected hostname.

Gets localized string like: The Uri \"{0}\" has an invalid service namespace.

Parameter 0 for string: The Uri \"{0}\" has an invalid service namespace.

Gets localized string like: Channel Open did not complete within the specified timeout of {0}.

Parameter 0 for string: Channel Open did not complete within the specified timeout of {0}.

Gets localized string like: The specified parameter ({0}) in Parameters property was not used in the expression specified in SqlExpression.

Parameter 0 for string: The specified parameter ({0}) in Parameters property was not used in the expression specified in SqlExpression.

Gets localized string like: A parameter ({0}) used in the expression specified in SqlExpression is missing from the Parameters property.

Parameter 0 for string: A parameter ({0}) used in the expression specified in SqlExpression is missing from the Parameters property.

Gets localized string like: Uri Bad format: {0}

Parameter 0 for string: Uri Bad format: {0}

Gets localized string like: Unsupported type {0} for array.

Parameter 0 for string: Unsupported type {0} for array.

Gets localized string like: Another update request is in progress for the entity {0}.

Parameter 0 for string: Another update request is in progress for the entity {0}.

Gets localized string like: '{0}' is not a supported type.

Parameter 0 for string: '{0}' is not a supported type.

Gets localized string like: A duplicate property '{0}' was found in the Service Bus connection string.

Parameter 0 for string: A duplicate property '{0}' was found in the Service Bus connection string.

Gets localized string like: Configuration is missing required information. Make sure the property '{0}' is defined as part of '{1}' key within 'appSettings' section, or Windows Azure configuration settings.

Parameter 0 for string: Configuration is missing required information. Make sure the property '{0}' is defined as part of '{1}' key within 'appSettings' section, or Windows Azure configuration settings. Parameter 1 for string: Configuration is missing required information. Make sure the property '{0}' is defined as part of '{1}' key within 'appSettings' section, or Windows Azure configuration settings.

Gets localized string like: The Service Bus connection string contains invalid property. '{0}' is not a valid property within the connection string.

Parameter 0 for string: The Service Bus connection string contains invalid property. '{0}' is not a valid property within the connection string.

Gets localized string like: The Service Bus connection string contains invalid value. The property '{0}' has invalid value. Check the format of the value before retrying.

Parameter 0 for string: The Service Bus connection string contains invalid value. The property '{0}' has invalid value. Check the format of the value before retrying.

Gets localized string like: The Service Bus connection string contains invalid value. The property '{0}' has invalid value '{1}'.

Parameter 0 for string: The Service Bus connection string contains invalid value. The property '{0}' has invalid value '{1}'. Parameter 1 for string: The Service Bus connection string contains invalid value. The property '{0}' has invalid value '{1}'.

Gets localized string like: Unable to create MessagingFactory using connection string. {0} See inner exception for details. Check your connection string and then try again. For more information please see http://go.microsoft.com/fwlink/?LinkID=249089

Parameter 0 for string: Unable to create MessagingFactory using connection string. {0} See inner exception for details. Check your connection string and then try again. For more information please see http://go.microsoft.com/fwlink/?LinkID=249089

Gets localized string like: Unable to create NamespaceManager using connection string. {0} See inner exception for details. Check your connection string and then try again. For more information please see http://go.microsoft.com/fwlink/?LinkID=249089

Parameter 0 for string: Unable to create NamespaceManager using connection string. {0} See inner exception for details. Check your connection string and then try again. For more information please see http://go.microsoft.com/fwlink/?LinkID=249089

Gets localized string like: Some of the configuration is missing a required component. Make sure all or none of the following properties are defined as part of '{0}' key within 'appSettings' section, or Windows Azure configuration settings: [{1}]

Parameter 0 for string: Some of the configuration is missing a required component. Make sure all or none of the following properties are defined as part of '{0}' key within 'appSettings' section, or Windows Azure configuration settings: [{1}] Parameter 1 for string: Some of the configuration is missing a required component. Make sure all or none of the following properties are defined as part of '{0}' key within 'appSettings' section, or Windows Azure configuration settings: [{1}]

Gets localized string like: The messaging entity '{0}' has been moved to a different container

Parameter 0 for string: The messaging entity '{0}' has been moved to a different container

Gets localized string like: Please make sure either all or none of the following arguments are defined: '{0}'.

Parameter 0 for string: Please make sure either all or none of the following arguments are defined: '{0}'.

Gets localized string like: The stream of type '{0}' within the BrokeredMessage is not cloneable.

Parameter 0 for string: The stream of type '{0}' within the BrokeredMessage is not cloneable.

Gets localized string like: The Value of Property '{0}' cannot be less than Value of Property '{1}'.

Parameter 0 for string: The Value of Property '{0}' cannot be less than Value of Property '{1}'. Parameter 1 for string: The Value of Property '{0}' cannot be less than Value of Property '{1}'.

Gets localized string like: Messaging entity '{0}' is currently disabled for Receive operations.

Parameter 0 for string: Messaging entity '{0}' is currently disabled for Receive operations.

Gets localized string like: Messaging entity '{0}' is currently disabled for Send operations.

Parameter 0 for string: Messaging entity '{0}' is currently disabled for Send operations.

Gets localized string like: Could not find '{0}' setting in gateway

Parameter 0 for string: Could not find '{0}' setting in gateway

Gets localized string like: The specified value ({0}) is invalid. "maxConcurrentCalls" must be greater than zero.

Parameter 0 for string: The specified value ({0}) is invalid. "maxConcurrentCalls" must be greater than zero.

Gets localized string like: This '{0}' instance has already been started once. To start another instance, please create a new '{0}' object and start that.

Parameter 0 for string: This '{0}' instance has already been started once. To start another instance, please create a new '{0}' object and start that.

Gets localized string like: An exception was received when sending the message to queue '{0}'. Exception: {1}: {2}

Parameter 0 for string: An exception was received when sending the message to queue '{0}'. Exception: {1}: {2} Parameter 1 for string: An exception was received when sending the message to queue '{0}'. Exception: {1}: {2} Parameter 2 for string: An exception was received when sending the message to queue '{0}'. Exception: {1}: {2}

Gets localized string like: Could not use property '{0}' in message id '{1}'. Expected type '{2}' but received type '{3}' with string value '{4}'.

Parameter 0 for string: Could not use property '{0}' in message id '{1}'. Expected type '{2}' but received type '{3}' with string value '{4}'. Parameter 1 for string: Could not use property '{0}' in message id '{1}'. Expected type '{2}' but received type '{3}' with string value '{4}'. Parameter 2 for string: Could not use property '{0}' in message id '{1}'. Expected type '{2}' but received type '{3}' with string value '{4}'. Parameter 3 for string: Could not use property '{0}' in message id '{1}'. Expected type '{2}' but received type '{3}' with string value '{4}'. Parameter 4 for string: Could not use property '{0}' in message id '{1}'. Expected type '{2}' but received type '{3}' with string value '{4}'.

Gets localized string like: Unable to use the certificate specified in apple credentials. The error is: '{0}'

Parameter 0 for string: Unable to use the certificate specified in apple credentials. The error is: '{0}'

Gets localized string like: Invalid token '{0}' in expression :'{1}'.

Parameter 0 for string: Invalid token '{0}' in expression :'{1}'. Parameter 1 for string: Invalid token '{0}' in expression :'{1}'.

Gets localized string like: Expression is '{0}'. Literal is missing closing notation. Current invalid token is '{1}'.

Parameter 0 for string: Expression is '{0}'. Literal is missing closing notation. Current invalid token is '{1}'. Parameter 1 for string: Expression is '{0}'. Literal is missing closing notation. Current invalid token is '{1}'.

Gets localized string like: Must contain WNS Header : '{0}'.

Parameter 0 for string: Must contain WNS Header : '{0}'.

Gets localized string like: Property name is of length: ' {0}'. Maximum allowed length is '{1}'.

Parameter 0 for string: Property name is of length: ' {0}'. Maximum allowed length is '{1}'. Parameter 1 for string: Property name is of length: ' {0}'. Maximum allowed length is '{1}'.

Gets localized string like: Property Name: '{0}', Only ASCII-7 alphanumeric characters and '_' are permitted in the property name.

Parameter 0 for string: Property Name: '{0}', Only ASCII-7 alphanumeric characters and '_' are permitted in the property name.

Gets localized string like: Token has to begin with one of these characters . % ' "" $. Invalid token is '{0}', Expression '{1}'.

Parameter 0 for string: Token has to begin with one of these characters . % ' "" $. Invalid token is '{0}', Expression '{1}'. Parameter 1 for string: Token has to begin with one of these characters . % ' "" $. Invalid token is '{0}', Expression '{1}'.

Gets localized string like: Unsupported channel uri: '{0}'

Parameter 0 for string: Unsupported channel uri: '{0}'

Gets localized string like: Unsupported expression :'{0}'

Parameter 0 for string: Unsupported expression :'{0}'

Gets localized string like: WNS header '{0}' is null or empty.

Parameter 0 for string: WNS header '{0}' is null or empty.

Gets localized string like: Pairing error: MessageFactory at '{0}' is open and MessagingFactory at '{1}' is not open. Faulting MessagingFactory at '{0}'.

Parameter 0 for string: Pairing error: MessageFactory at '{0}' is open and MessagingFactory at '{1}' is not open. Faulting MessagingFactory at '{0}'. Parameter 1 for string: Pairing error: MessageFactory at '{0}' is open and MessagingFactory at '{1}' is not open. Faulting MessagingFactory at '{0}'.

Gets localized string like: Must contain Mpns Header : '{0}'.

Parameter 0 for string: Must contain Mpns Header : '{0}'.

Gets localized string like: Unable to use the certificate specified in mpns credentials. The error is : '{0}'.

Parameter 0 for string: Unable to use the certificate specified in mpns credentials. The error is : '{0}'.

Gets localized string like: MPNS header '{0}' is null or empty.

Parameter 0 for string: MPNS header '{0}' is null or empty.

Gets localized string like: The api-version in the query string is not supported. Either remove it from the Uri or use one of '{0}'.

Parameter 0 for string: The api-version in the query string is not supported. Either remove it from the Uri or use one of '{0}'.

Gets localized string like: The '{0}' property exceeds the maximum allowed size of {1} characters.

Parameter 0 for string: The '{0}' property exceeds the maximum allowed size of {1} characters. Parameter 1 for string: The '{0}' property exceeds the maximum allowed size of {1} characters.

Gets localized string like: The specified type ({0}) does not have a public default constructor.

Parameter 0 for string: The specified type ({0}) does not have a public default constructor.

Gets localized string like: The specified type ({0}) does not implement {1} or {2}.

Parameter 0 for string: The specified type ({0}) does not implement {1} or {2}. Parameter 1 for string: The specified type ({0}) does not implement {1} or {2}. Parameter 2 for string: The specified type ({0}) does not implement {1} or {2}.

Gets localized string like: {0} property must be equal or less than {1} property.

Parameter 0 for string: {0} property must be equal or less than {1} property. Parameter 1 for string: {0} property must be equal or less than {1} property.

Gets localized string like: The specified value ({0}) is not valid. The value must be positive.

Parameter 0 for string: The specified value ({0}) is not valid. The value must be positive.

Gets localized string like: The messaging entity '{0}' is not valid anymore.

Parameter 0 for string: The messaging entity '{0}' is not valid anymore.

Gets localized string like: Only {0} properties are required: {1}.

Parameter 0 for string: Only {0} properties are required: {1}. Parameter 1 for string: Only {0} properties are required: {1}.

Gets localized string like: Required properties are not specified: {0}.

Parameter 0 for string: Required properties are not specified: {0}.

Gets localized string like: Required property is not specified: {0}.

Parameter 0 for string: Required property is not specified: {0}.

Gets localized string like: The operation '{0}' cannot be completed because the message was received through Peek. Make sure the message is obtained from a Receive() call instead.

Parameter 0 for string: The operation '{0}' cannot be completed because the message was received through Peek. Make sure the message is obtained from a Receive() call instead.

Gets localized string like: {0} must be equal to {1} when {1} has a value different than null. Assign null to {1} to be able to set {0}.

Parameter 0 for string: {0} must be equal to {1} when {1} has a value different than null. Assign null to {1} to be able to set {0}. Parameter 1 for string: {0} must be equal to {1} when {1} has a value different than null. Assign null to {1} to be able to set {0}.

Gets localized string like: EventHubReceiver can only have either client side starting offset or datetime, or create use a consumer group with checkpoint enabled (EnableCheckpoint={0})

Parameter 0 for string: EventHubReceiver can only have either client side starting offset or datetime, or create use a consumer group with checkpoint enabled (EnableCheckpoint={0})

Gets localized string like: '{0}' is not a supported operation for EventHub.

Parameter 0 for string: '{0}' is not a supported operation for EventHub.

Gets localized string like: All event data in a SendBatch operation must have the same partition key. Expected key is '{0}' but encountered another key of '{1}'.

Parameter 0 for string: All event data in a SendBatch operation must have the same partition key. Expected key is '{0}' but encountered another key of '{1}'. Parameter 1 for string: All event data in a SendBatch operation must have the same partition key. Expected key is '{0}' but encountered another key of '{1}'.

Gets localized string like: All event data in a SendBatch operation must have the same publisher name. Expected name is '{0}' but encountered another name of '{1}'.

Parameter 0 for string: All event data in a SendBatch operation must have the same publisher name. Expected name is '{0}' but encountered another name of '{1}'. Parameter 1 for string: All event data in a SendBatch operation must have the same publisher name. Expected name is '{0}' but encountered another name of '{1}'.

Gets localized string like: '{0}' is not a supported transport type for EventHub. Use AMQP.

Parameter 0 for string: '{0}' is not a supported transport type for EventHub. Use AMQP.

Gets localized string like: The minimum back off period '{0}' cannot exceed the maximum back off period of '{1}'.

Parameter 0 for string: The minimum back off period '{0}' cannot exceed the maximum back off period of '{1}'. Parameter 1 for string: The minimum back off period '{0}' cannot exceed the maximum back off period of '{1}'.

Gets localized string like: Request on entity {0} conflicted with another request

Parameter 0 for string: Request on entity {0} conflicted with another request

Gets localized string like: The specified partition key '{0}' is invalid for partition '{1}'. Do not set a value when sending using a PartitionedSender. Otherwise use EventHubClient.Send.

Parameter 0 for string: The specified partition key '{0}' is invalid for partition '{1}'. Do not set a value when sending using a PartitionedSender. Otherwise use EventHubClient.Send. Parameter 1 for string: The specified partition key '{0}' is invalid for partition '{1}'. Do not set a value when sending using a PartitionedSender. Otherwise use EventHubClient.Send.

Gets localized string like: Sending empty {0} is not a valid operation.

Parameter 0 for string: Sending empty {0} is not a valid operation.

Gets localized string like: Values of type '{0}' not supported as valid initial offsets. Only string and DateTime are valid offset types for EventProcessorOptions.InitialOffsetProvider.

Parameter 0 for string: Values of type '{0}' not supported as valid initial offsets. Only string and DateTime are valid offset types for EventProcessorOptions.InitialOffsetProvider.

Gets localized string like: Publisher: {0}, was revoked access to Send messages to EventHub.

Parameter 0 for string: Publisher: {0}, was revoked access to Send messages to EventHub.

Gets localized string like: {0} name should be specified as EntityPath in connectionString.

Parameter 0 for string: {0} name should be specified as EntityPath in connectionString.

Gets localized string like: {0} name should not be specified as EntityPath while using this Overload. Instead, please use 'path' parameter.

Parameter 0 for string: {0} name should not be specified as EntityPath while using this Overload. Instead, please use 'path' parameter.

Gets localized string like: ConnectionString used to create {0} shouldn't include EntityPath as {0} is at Namespace level.

Parameter 0 for string: ConnectionString used to create {0} shouldn't include EntityPath as {0} is at Namespace level.

Gets localized string like: {0} cannot be specified along with {1}. {0} alone should be sufficient to Authenticate the request.

Parameter 0 for string: {0} cannot be specified along with {1}. {0} alone should be sufficient to Authenticate the request. Parameter 1 for string: {0} cannot be specified along with {1}. {0} alone should be sufficient to Authenticate the request.

Gets localized string like: The Service Bus connection string contains invalid combination. {0} should be specified alone and shouldn't be combined with {1}.

Parameter 0 for string: The Service Bus connection string contains invalid combination. {0} should be specified alone and shouldn't be combined with {1}. Parameter 1 for string: The Service Bus connection string contains invalid combination. {0} should be specified alone and shouldn't be combined with {1}.

Gets localized string like: Setting the SystemProperty : Publisher ({0}) on EventData is not allowed. Use connection string to specify the Publisher.

Parameter 0 for string: Setting the SystemProperty : Publisher ({0}) on EventData is not allowed. Use connection string to specify the Publisher.

Gets localized string like: Expression is {0}. {2} is not a positive integer. The current invalid token is {1}

Parameter 0 for string: Expression is {0}. {2} is not a positive integer. The current invalid token is {1} Parameter 1 for string: Expression is {0}. {2} is not a positive integer. The current invalid token is {1} Parameter 2 for string: Expression is {0}. {2} is not a positive integer. The current invalid token is {1}

Gets localized string like: Expression is {0}. Error trying to parse for .(prop , n) format. The current invalid token is {1}

Parameter 0 for string: Expression is {0}. Error trying to parse for .(prop , n) format. The current invalid token is {1} Parameter 1 for string: Expression is {0}. Error trying to parse for .(prop , n) format. The current invalid token is {1}

Gets localized string like: Expression is {0}. The expression %(prop , n) is not a valid. The current invalid token is {1}

Parameter 0 for string: Expression is {0}. The expression %(prop , n) is not a valid. The current invalid token is {1} Parameter 1 for string: Expression is {0}. The expression %(prop , n) is not a valid. The current invalid token is {1}

Gets localized string like: Expression is {0}. Missing closing parentheses. Current invalid token is {1}

Parameter 0 for string: Expression is {0}. Missing closing parentheses. Current invalid token is {1} Parameter 1 for string: Expression is {0}. Missing closing parentheses. Current invalid token is {1}

Gets localized string like: Expression is {0}. Missing default's end. Current invalid token is {1}

Parameter 0 for string: Expression is {0}. Missing default's end. Current invalid token is {1} Parameter 1 for string: Expression is {0}. Missing default's end. Current invalid token is {1}

Gets localized string like: Expression is {0}. Missing property. Current invalid token is {1}

Parameter 0 for string: Expression is {0}. Missing property. Current invalid token is {1} Parameter 1 for string: Expression is {0}. Missing property. Current invalid token is {1}

Gets localized string like: Expression is {0}. The character following $ or . or % should be a ( The current invalid token is {1}

Parameter 0 for string: Expression is {0}. The character following $ or . or % should be a ( The current invalid token is {1} Parameter 1 for string: Expression is {0}. The character following $ or . or % should be a ( The current invalid token is {1}

Gets localized string like: Expression is {0}. Literal is missing closing notation. Current invalid token is {1}

Parameter 0 for string: Expression is {0}. Literal is missing closing notation. Current invalid token is {1} Parameter 1 for string: Expression is {0}. Literal is missing closing notation. Current invalid token is {1}

Gets localized string like: Expression is {0}. Only valid composition operator is +. Current invalid token is : {1}

Parameter 0 for string: Expression is {0}. Only valid composition operator is +. Current invalid token is : {1} Parameter 1 for string: Expression is {0}. Only valid composition operator is +. Current invalid token is : {1}

Gets localized string like: Property name is of length. {0}. Maximum allowed length is {1}

Parameter 0 for string: Property name is of length. {0}. Maximum allowed length is {1} Parameter 1 for string: Property name is of length. {0}. Maximum allowed length is {1}

Gets localized string like: Property name is {0}. Only ASCII-7 alphanumeric characters and '_' are permitted in the property name

Parameter 0 for string: Property name is {0}. Only ASCII-7 alphanumeric characters and '_' are permitted in the property name

Gets localized string like: Expression is {0}. Token has to begin with one of these characters . % ' "" $. Current invalid token is {1}

Parameter 0 for string: Expression is {0}. Token has to begin with one of these characters . % ' "" $. Current invalid token is {1} Parameter 1 for string: Expression is {0}. Token has to begin with one of these characters . % ' "" $. Current invalid token is {1}

Gets localized string like: Expression is {0}. Error is it contains an invalid token : {1}

Parameter 0 for string: Expression is {0}. Error is it contains an invalid token : {1} Parameter 1 for string: Expression is {0}. Error is it contains an invalid token : {1}

Gets localized string like: Expression is {0}. Error is closing parenthesis is missing

Parameter 0 for string: Expression is {0}. Error is closing parenthesis is missing

Gets localized string like: The receiver received an AMQP message that cannot be decoded. Reference: {0}, Code: {1}, Details: {2}.

Parameter 0 for string: The receiver received an AMQP message that cannot be decoded. Reference: {0}, Code: {1}, Details: {2}. Parameter 1 for string: The receiver received an AMQP message that cannot be decoded. Reference: {0}, Code: {1}, Details: {2}. Parameter 2 for string: The receiver received an AMQP message that cannot be decoded. Reference: {0}, Code: {1}, Details: {2}.

Gets localized string like: Wrong audience in authorization header token. Resource Uri in the Publisher token should exactly match the Audience Uri. Only EventHub level SAS Keys should be used for Token generation. Tracking Id: {0}.

Parameter 0 for string: Wrong audience in authorization header token. Resource Uri in the Publisher token should exactly match the Audience Uri. Only EventHub level SAS Keys should be used for Token generation. Tracking Id: {0}.

Gets localized string like: The operation '{0}' is not supported for an entity with partitioning enabled.

Parameter 0 for string: The operation '{0}' is not supported for an entity with partitioning enabled.

Gets localized string like: This SDK does not support operation '{0}' for an entity with partitioning enabled. Please use a newer version of the SDK.

Parameter 0 for string: This SDK does not support operation '{0}' for an entity with partitioning enabled. Please use a newer version of the SDK.

Gets localized string like: Please remove the quotes surrounding '{0}'.

Parameter 0 for string: Please remove the quotes surrounding '{0}'.

Gets localized string like: Invalid archive path provided. Error: '{0}'.

Parameter 0 for string: Invalid archive path provided. Error: '{0}'.

Gets localized string like: '{0}' is null or empty.

Parameter 0 for string: '{0}' is null or empty.

Gets localized string like: The receiverName parameter exceeds the maximum allowed size of {0} characters.

Parameter 0 for string: The receiverName parameter exceeds the maximum allowed size of {0} characters.

Gets localized string like: Max length for custom part in an archive name format is '{0}'.

Parameter 0 for string: Max length for custom part in an archive name format is '{0}'.

Gets localized string like: A valid frame header cannot be formed from the incoming byte stream.

Gets localized string like: No session-id was specified for a session receiver.

Gets localized string like: The object is not open.

Gets localized string like: Dynamic terminus is not currently supported.

Gets localized string like: Unable to get valid source IP address for connection.

Gets localized string like: The buffer has already been reclaimed.

Gets localized string like: A message cannot be cloned after it has been sent.

Gets localized string like: A message cannot be sent because it is either received from a link or is already sent over a link.

Gets localized string like: The token type is not supported by this client implementation.

Gets localized string like: Sending an emtpy message is not allowed. At least one message section must be initialized.

Gets localized string like: No valid IP addresses were found for host {0}.

Parameter 0 for string: No valid IP addresses were found for host {0}.

Gets localized string like: The descriptor code of the performative '{0}' cannot be processed by the link.

Parameter 0 for string: The descriptor code of the performative '{0}' cannot be processed by the link.

Gets localized string like: The format code '{0}' at frame buffer offset '{1}' is invalid or unexpected.

Parameter 0 for string: The format code '{0}' at frame buffer offset '{1}' is invalid or unexpected. Parameter 1 for string: The format code '{0}' at frame buffer offset '{1}' is invalid or unexpected.

Gets localized string like: The value '{0}' is not a valid message section code or name.

Parameter 0 for string: The value '{0}' is not a valid message section code or name.

Gets localized string like: The required field '{0}' is not set in '{1}'.

Parameter 0 for string: The required field '{0}' is not set in '{1}'. Parameter 1 for string: The required field '{0}' is not set in '{1}'.

Gets localized string like: Type {0} is not currently supported in AMQP application properties.

Parameter 0 for string: Type {0} is not currently supported in AMQP application properties.

Gets localized string like: The AMQP object {0} is aborted.

Parameter 0 for string: The AMQP object {0} is aborted.

Gets localized string like: The AMQP object {0} is closing. Operation '{1}' cannot be performed.

Parameter 0 for string: The AMQP object {0} is closing. Operation '{1}' cannot be performed. Parameter 1 for string: The AMQP object {0} is closing. Operation '{1}' cannot be performed.

Gets localized string like: operation: {0}, state: {1}

Parameter 0 for string: operation: {0}, state: {1} Parameter 1 for string: operation: {0}, state: {1}

Gets localized string like: The message body type is {0} which is different from the requested {1}.

Parameter 0 for string: The message body type is {0} which is different from the requested {1}. Parameter 1 for string: The message body type is {0} which is different from the requested {1}.

Gets localized string like: The session channel '{0}' cannot be found in connection '{1}'.

Parameter 0 for string: The session channel '{0}' cannot be found in connection '{1}'. Parameter 1 for string: The session channel '{0}' cannot be found in connection '{1}'.

Gets localized string like: The link handle '{0}' cannot be found in session '{1}'.

Parameter 0 for string: The link handle '{0}' cannot be found in session '{1}'. Parameter 1 for string: The link handle '{0}' cannot be found in session '{1}'.

Gets localized string like: The handle '{0}' is already associated with object '{1}'.

Parameter 0 for string: The handle '{0}' is already associated with object '{1}'. Parameter 1 for string: The handle '{0}' is already associated with object '{1}'.

Gets localized string like: Cannot allocate more handles to the current session or connection. The maximum number of handles allowed is {0}. Please free up resources and try again.

Parameter 0 for string: Cannot allocate more handles to the current session or connection. The maximum number of handles allowed is {0}. Please free up resources and try again.

Gets localized string like: None of the server sasl-mechanisms ({0}) are supported by the client ({1}).

Parameter 0 for string: None of the server sasl-mechanisms ({0}) are supported by the client ({1}). Parameter 1 for string: None of the server sasl-mechanisms ({0}) are supported by the client ({1}).

Gets localized string like: The received message (delivery-id:{0}, size:{1} bytes) exceeds the limit ({2} bytes) currently allowed on the link.

Parameter 0 for string: The received message (delivery-id:{0}, size:{1} bytes) exceeds the limit ({2} bytes) currently allowed on the link. Parameter 1 for string: The received message (delivery-id:{0}, size:{1} bytes) exceeds the limit ({2} bytes) currently allowed on the link. Parameter 2 for string: The received message (delivery-id:{0}, size:{1} bytes) exceeds the limit ({2} bytes) currently allowed on the link.

Gets localized string like: The connection was inactive for more than the allowed {0} milliseconds and is closed by container '{1}'.

Parameter 0 for string: The connection was inactive for more than the allowed {0} milliseconds and is closed by container '{1}'. Parameter 1 for string: The connection was inactive for more than the allowed {0} milliseconds and is closed by container '{1}'.

Gets localized string like: There is no link credit to accept the delivery (id={0}).

Parameter 0 for string: There is no link credit to accept the delivery (id={0}).

Gets localized string like: The requested protocol version '{0}' is not supported. The supported version is '{1}'.

Parameter 0 for string: The requested protocol version '{0}' is not supported. The supported version is '{1}'. Parameter 1 for string: The requested protocol version '{0}' is not supported. The supported version is '{1}'.

Gets localized string like: At least one protocol version must be set for {0}.

Parameter 0 for string: At least one protocol version must be set for {0}.

Gets localized string like: The type {0} is not supported.

Parameter 0 for string: The type {0} is not supported.

Gets localized string like: {0} is not supported over AMQP.

Parameter 0 for string: {0} is not supported over AMQP.

Gets localized string like: Open was already called for the object '{0}' (state={1}).

Parameter 0 for string: Open was already called for the object '{0}' (state={1}). Parameter 1 for string: Open was already called for the object '{0}' (state={1}).

Gets localized string like: The operation did not complete within the allocated time {0} for object {1}. For more information on exception types and proper exception handling, please refer to http://go.microsoft.com/fwlink/?LinkId=761101

Parameter 0 for string: The operation did not complete within the allocated time {0} for object {1}. For more information on exception types and proper exception handling, please refer to http://go.microsoft.com/fwlink/?LinkId=761101 Parameter 1 for string: The operation did not complete within the allocated time {0} for object {1}. For more information on exception types and proper exception handling, please refer to http://go.microsoft.com/fwlink/?LinkId=761101

Gets localized string like: The delivery id is already used (id:{0}, next-id:{1}, ulw:{2}, index:{3}).

Parameter 0 for string: The delivery id is already used (id:{0}, next-id:{1}, ulw:{2}, index:{3}). Parameter 1 for string: The delivery id is already used (id:{0}, next-id:{1}, ulw:{2}, index:{3}). Parameter 2 for string: The delivery id is already used (id:{0}, next-id:{1}, ulw:{2}, index:{3}). Parameter 3 for string: The delivery id is already used (id:{0}, next-id:{1}, ulw:{2}, index:{3}).

Gets localized string like: The Encoding value of type ({0}:{1}) is different from that of its base type ({2}:{3}).

Parameter 0 for string: The Encoding value of type ({0}:{1}) is different from that of its base type ({2}:{3}). Parameter 1 for string: The Encoding value of type ({0}:{1}) is different from that of its base type ({2}:{3}). Parameter 2 for string: The Encoding value of type ({0}:{1}) is different from that of its base type ({2}:{3}). Parameter 3 for string: The Encoding value of type ({0}:{1}) is different from that of its base type ({2}:{3}).

Gets localized string like: The order {0} is defined more than once for type {1}. Please specify the Order property of AmqpMemberAttribute explicitly to avoid this error.

Parameter 0 for string: The order {0} is defined more than once for type {1}. Please specify the Order property of AmqpMemberAttribute explicitly to avoid this error. Parameter 1 for string: The order {0} is defined more than once for type {1}. Please specify the Order property of AmqpMemberAttribute explicitly to avoid this error.

Gets localized string like: The descriptor {0} is unknown while deserializing {1}. This usually happens if a wrong type is given to the ReadObject method or KnownTypesAttribute is not defined.

Parameter 0 for string: The descriptor {0} is unknown while deserializing {1}. This usually happens if a wrong type is given to the ReadObject method or KnownTypesAttribute is not defined. Parameter 1 for string: The descriptor {0} is unknown while deserializing {1}. This usually happens if a wrong type is given to the ReadObject method or KnownTypesAttribute is not defined.

Gets localized string like: The requested data size '{0}' is greater than the length of the remaining buffer '{1}'.

Parameter 0 for string: The requested data size '{0}' is greater than the length of the remaining buffer '{1}'. Parameter 1 for string: The requested data size '{0}' is greater than the length of the remaining buffer '{1}'.

Gets localized string like: An AMQP error occurred (condition='{0}').

Parameter 0 for string: An AMQP error occurred (condition='{0}').

Gets localized string like: The hostname within the Target or Source address URL in the ATTACH frame ('{0}') is different than the hostname passed in the connection OPEN ('{1}').

Parameter 0 for string: The hostname within the Target or Source address URL in the ATTACH frame ('{0}') is different than the hostname passed in the connection OPEN ('{1}'). Parameter 1 for string: The hostname within the Target or Source address URL in the ATTACH frame ('{0}') is different than the hostname passed in the connection OPEN ('{1}').

Gets localized string like: The operation cannot be performed against publisher '{0}' because the targeted namespace '{1}' is of {2} tier.

Parameter 0 for string: The operation cannot be performed against publisher '{0}' because the targeted namespace '{1}' is of {2} tier. Parameter 1 for string: The operation cannot be performed against publisher '{0}' because the targeted namespace '{1}' is of {2} tier. Parameter 2 for string: The operation cannot be performed against publisher '{0}' because the targeted namespace '{1}' is of {2} tier.

Gets localized string like: Global opaque (non-DNS) addresses are not supported ('{0}')

Parameter 0 for string: Global opaque (non-DNS) addresses are not supported ('{0}')

Gets localized string like: The scheme of the Target or Source address URL in the ATTACH frame ('{0}') is invalid. Only 'amqp' and 'amqps' schemes are supported.

Parameter 0 for string: The scheme of the Target or Source address URL in the ATTACH frame ('{0}') is invalid. Only 'amqp' and 'amqps' schemes are supported.

Gets localized string like: Idle timeout value specified in connection OPEN ('{0} ms') is not supported. Minimum idle timeout is '{1}' ms.

Parameter 0 for string: Idle timeout value specified in connection OPEN ('{0} ms') is not supported. Minimum idle timeout is '{1}' ms. Parameter 1 for string: Idle timeout value specified in connection OPEN ('{0} ms') is not supported. Minimum idle timeout is '{1}' ms.

Gets localized string like: Comparison of {0} and {1} is invalid because the result is undefined.

Parameter 0 for string: Comparison of {0} and {1} is invalid because the result is undefined. Parameter 1 for string: Comparison of {0} and {1} is invalid because the result is undefined.

Gets localized string like: Invalid type for property '{0}' in the '{1}' section.

Parameter 0 for string: Invalid type for property '{0}' in the '{1}' section. Parameter 1 for string: Invalid type for property '{0}' in the '{1}' section.

Gets localized string like: Invalid value for property '{0}' in the '{1}' section.

Parameter 0 for string: Invalid value for property '{0}' in the '{1}' section. Parameter 1 for string: Invalid value for property '{0}' in the '{1}' section.

Gets localized string like: Property '{0}' in the '{1}' section is either missing, has the wrong type, or has an unexpected value.

Parameter 0 for string: Property '{0}' in the '{1}' section is either missing, has the wrong type, or has an unexpected value. Parameter 1 for string: Property '{0}' in the '{1}' section is either missing, has the wrong type, or has an unexpected value.

Gets localized string like: Missing property '{0}' in the '{1}' section.

Parameter 0 for string: Missing property '{0}' in the '{1}' section. Parameter 1 for string: Missing property '{0}' in the '{1}' section.

Gets localized string like: 'put-token' operation: the 'name' application property value '{0}' should match the token audience value. Expected: '{1}'

Parameter 0 for string: 'put-token' operation: the 'name' application property value '{0}' should match the token audience value. Expected: '{1}' Parameter 1 for string: 'put-token' operation: the 'name' application property value '{0}' should match the token audience value. Expected: '{1}'

Gets localized string like: Put token failed. status-code: {0}, status-description: {1}.

Parameter 0 for string: Put token failed. status-code: {0}, status-description: {1}. Parameter 1 for string: Put token failed. status-code: {0}, status-description: {1}.

Gets localized string like: A link to connection '{0}' $cbs node has already been opened.

Parameter 0 for string: A link to connection '{0}' $cbs node has already been opened.

Gets localized string like: Invalid command '{0}'.

Parameter 0 for string: Invalid command '{0}'.

Gets localized string like: A link to connection '{0}' $management node has already been opened.

Parameter 0 for string: A link to connection '{0}' $management node has already been opened.

Gets localized string like: Management operation failed. status-code: {0}, status-description: {1}.

Parameter 0 for string: Management operation failed. status-code: {0}, status-description: {1}. Parameter 1 for string: Management operation failed. status-code: {0}, status-description: {1}.

Gets localized string like: A link with name '{0}' is already attached in session {1}.

Parameter 0 for string: A link with name '{0}' is already attached in session {1}. Parameter 1 for string: A link with name '{0}' is already attached in session {1}.

Gets localized string like: A link with the same '{0}' value '{1}' address has been already registered to the entity management node $management.

Parameter 0 for string: A link with the same '{0}' value '{1}' address has been already registered to the entity management node $management. Parameter 1 for string: A link with the same '{0}' value '{1}' address has been already registered to the entity management node $management.

Gets localized string like: A request handler with id '{0}' was not found in the entity management node $management.

Parameter 0 for string: A request handler with id '{0}' was not found in the entity management node $management.

Gets localized string like: The response link '{0}' was not found in the entity management node $management.

Parameter 0 for string: The response link '{0}' was not found in the entity management node $management.

Gets localized string like: The required field '{0}' has an invalid type or is not set at '{1}'. The type should be '{2}'.

Parameter 0 for string: The required field '{0}' has an invalid type or is not set at '{1}'. The type should be '{2}'. Parameter 1 for string: The required field '{0}' has an invalid type or is not set at '{1}'. The type should be '{2}'. Parameter 2 for string: The required field '{0}' has an invalid type or is not set at '{1}'. The type should be '{2}'.

Gets localized string like: Cannot upgrade transport from type '{0}' to '{1}'.

Parameter 0 for string: Cannot upgrade transport from type '{0}' to '{1}'. Parameter 1 for string: Cannot upgrade transport from type '{0}' to '{1}'.

Gets localized string like: The received protocol header contains incorrect protocol name. Expect: 'A' 'M' 'Q' 'P', Actual bytes '{0}'.

Parameter 0 for string: The received protocol header contains incorrect protocol name. Expect: 'A' 'M' 'Q' 'P', Actual bytes '{0}'.

Provides an asynchronous producer/consumer collection.

Asynchronous semaphore used to keep track of asynchronous work.

The data stored in the collection.

Initializes the asynchronous producer/consumer collection to store data in a first-in-first-out (FIFO) order.

Initializes the asynchronous producer/consumer collection.

The underlying collection to use to store data.

Adds an element to the collection.

The item to be added.

Takes an element from the collection asynchronously.

A Task that represents the element removed from the collection.

Gets the number of elements in the collection.

Disposes of the collection.

Provides an asynchronous semaphore.

The current count.

The maximum count. If _maxCount isn't positive, the instance has been disposed.

Tasks waiting to be completed when the semaphore has count available.

Initializes the SemaphoreAsync with a count of zero and a maximum count of Int32.MaxValue.

Initializes the SemaphoreAsync with the specified count and a maximum count of Int32.MaxValue.

The initial count to use as the current count.

Initializes the SemaphoreAsync with the specified counts.

The initial count to use as the current count. The maximum count allowed.

Gets the current count.

Gets the maximum count.

Gets the number of operations currently waiting on the semaphore.

Waits for a unit to be available in the semaphore.

A Task that will be completed when a unit is available and this Wait operation succeeds.

Queues an action that will be executed when space is available in the semaphore.

The action to be executed. A Task that represents the execution of the action. Release does not need to be called for this action, as it will be handled implicitly by the Queue method.

Queues a function that will be executed when space is available in the semaphore.

The function to be executed. A Task that represents the execution of the function. Release does not need to be called for this function, as it will be handled implicitly by the Queue method.

Releases a unit of work to the semaphore.

Releases the resources used by the semaphore.

Provides access to an already completed task.

A completed task can be useful for using ContinueWith overloads where there aren't StartNew equivalents.

Gets a completed Task. Once we move to .NET 4.6 this can be removed and replaced with Task.CompletedTask

Provides access to an already completed task.

A completed task can be useful for using ContinueWith overloads where there aren't StartNew equivalents.

Initializes a Task.

Gets a completed Task.

Provides a TaskScheduler that provides control over priorities, fairness, and the underlying threads utilized.

Debug view for the QueuedTaskScheduler.

The scheduler.

Initializes the debug view.

The scheduler.

Gets all of the Tasks queued to the scheduler directly.

Gets the prioritized and fair queues.

A sorted list of round-robin queue lists. Tasks with the smallest priority value are preferred. Priority groups are round-robin'd through in order of priority.

Cancellation token used for disposal.

The maximum allowed concurrency level of this scheduler. If custom threads are used, this represents the number of created threads.

Whether we're processing tasks on the current thread.

The scheduler onto which actual work is scheduled.

The queue of tasks to process when using an underlying target scheduler.

The number of Tasks that have been queued or that are running whiel using an underlying scheduler.

The threads used by the scheduler to process work.

The collection of tasks to be executed on our custom threads.

Initializes the scheduler.

Initializes the scheduler.

The target underlying scheduler onto which this sceduler's work is queued.

Initializes the scheduler.

The target underlying scheduler onto which this sceduler's work is queued. The maximum degree of concurrency allowed for this scheduler's work.

Initializes the scheduler.

The number of threads to create and use for processing work items.

Initializes the scheduler.

The number of threads to create and use for processing work items. The name to use for each of the created threads. A Boolean value that indicates whether to use foreground threads instead of background. The priority to assign to each thread. The apartment state to use for each thread. The stack size to use for each thread. An initialization routine to run on each thread. A finalization routine to run on each thread.

The dispatch loop run by all threads in this scheduler.

An initialization routine to run when the thread begins. A finalization routine to run before the thread ends.

Find the next task that should be executed, based on priorities and fairness and the like.

The found task, or null if none was found. The scheduler associated with the found task. Due to security checks inside of TPL, this scheduler needs to be used to execute that task.

Queues a task to the scheduler.

The task to be queued.

Process tasks one at a time in the best order. This should be run in a Task generated by QueueTask. It's been separated out into its own method to show up better in Parallel Tasks.

Notifies the pool that there's a new item to be executed in one of the round-robin queues.

Tries to execute a task synchronously on the current thread.

The task to execute. Whether the task was previously queued. true if the task was executed; otherwise, false.

Gets the tasks scheduled to this scheduler.

An enumerable of all tasks queued to this scheduler. This does not include the tasks on sub-schedulers. Those will be retrieved by the debugger separately.

Gets the maximum concurrency level to use when processing tasks.

Initiates shutdown of the scheduler.

Creates and activates a new scheduling queue for this scheduler.

The newly created and activated queue at priority 0.

Creates and activates a new scheduling queue for this scheduler.

The priority level for the new queue. The newly created and activated queue at the specified priority.

Removes a scheduler from the group.

The scheduler to be removed.

A group of queues a the same priority level.

The starting index for the next round-robin traversal.

Creates a search order through this group.

An enumerable of indices for this group.

Provides a scheduling queue associatd with a QueuedTaskScheduler.

A debug view for the queue.

The queue.

Initializes the debug view.

The queue to be debugged.

Gets the priority of this queue in its associated scheduler.

Gets the ID of this scheduler.

Gets all of the tasks scheduled to this queue.

Gets the QueuedTaskScheduler with which this queue is associated.

The scheduler with which this pool is associated.

The work items stored in this queue.

Whether this queue has been disposed.

Gets the priority for this queue.

Initializes the queue.

The priority associated with this queue. The scheduler with which this queue is associated.

Gets the tasks scheduled to this scheduler.

An enumerable of all tasks queued to this scheduler.

Queues a task to the scheduler.

The task to be queued.

Tries to execute a task synchronously on the current thread.

The task to execute. Whether the task was previously queued. true if the task was executed; otherwise, false.

Runs the specified ask.

The task to execute.

Gets the maximum concurrency level to use when processing tasks.

Signals that the queue should be removed from the scheduler as soon as the queue is empty.

Classes implementing this interface must supply a method that merges two location objects to return a new object of the same type. MPPG-generated parsers have the default location action equivalent to "@$ = @1.Merge(@N);" where N is the right-hand-side length of the production.

This is the default class that carries location information from the scanner to the parser. If you don't declare "%YYLTYPE Foo" the parser will expect to deal with this type.

Abstract scanner class that MPPG expects its scanners to extend.